Intermatic EC210WK

Intermatic EC210WK Countdown Timer User Manual

Model: EC210WK

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Intermatic EC210WK Countdown Timer. This device is designed to provide silent, timed control for various electrical loads, enhancing energy savings and convenience in your home or office.

The EC210WK offers selectable countdown times of 10, 20, 30, and 60 minutes, along with a "HOLD" function for continuous operation. It is suitable for controlling indoor and outdoor lighting, bathroom and exhaust fans, and other energy-consuming appliances.

2. Pomembne varnostne informacije

OPOZORILO: Risk of electric shock. Improper installation can lead to serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Installation should be performed by a qualified electrician or in accordance with local electrical codes.

3. Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

Note: A wall plate is sold separately and is not included with this unit.

4. Namestitev

4.1 Potrebna orodja

4.2 Električna shema in povezave

The EC210WK timer requires a neutral wire for proper operation. Ensure your electrical box has a neutral wire available. Refer to the wiring diagram below for correct connections.

Nazaj view of Intermatic EC210WK timer showing wiring connections
Slika 1: Zadaj view of the EC210WK timer with pre-stripped wires and a clear wiring diagram label. The label indicates connections for Black (Hot), Green (Ground), Red (Load), and White (Neutral).
  1. Izklopite napajanje: Locate the circuit breaker controlling the switch you are replacing and turn it OFF. Verify power is off using a voltage tester.
  2. Odstranite staro stikalo: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
  3. Prepoznajte žice:
    • Črna žica: Connects to the incoming 120 VAC HOT line.
    • Bela žica: Connects to the NEUTRAL line.
    • Rdeča žica: Connects to the LOAD (the appliance or light fixture).
    • zelena žica: Connects to the GROUND wire.
  4. Connect New Timer: Using wire nuts (not included), connect the wires from the EC210WK timer to the corresponding wires in the electrical box.
    • Timer's Black wire to House Hot wire.
    • Timer's White wire to House Neutral wire.
    • Timer's Red wire to House Load wire.
    • Timer's Green wire to House Ground wire.
  5. Časovnik montaže: Carefully fold the wires into the electrical box, ensuring no wires are pinched. Secure the timer to the electrical box using the provided screws.
  6. Namestite stensko ploščo: Attach a standard decorator-style wall plate (not included) over the timer.
  7. Obnovi moč: Ponovno vklopite napajanje na odklopniku.

5. Delovanje

The Intermatic EC210WK timer features five push buttons for selecting countdown durations and a "HOLD" function.

Spredaj view of Intermatic EC210WK timer with wall plate
Slika 2: Spredaj view of the EC210WK timer installed in a wall plate, showing the 60 MIN, 30 MIN, 20 MIN, 10 MIN, and HOLD buttons.
  1. Selecting a Countdown Time: Press the desired time button (10 MIN, 20 MIN, 30 MIN, or 60 MIN). The corresponding LED indicator will illuminate, and the connected load will turn ON for the selected duration. The load will automatically turn OFF when the countdown expires.
  2. "HOLD" Function: Press the "HOLD" button to keep the connected load ON continuously. The "HOLD" LED indicator will illuminate. To exit the "HOLD" function, press any of the countdown time buttons, or press the "HOLD" button again to turn the load OFF.
  3. Canceling a Countdown: To turn OFF the connected load before the countdown expires, press the currently active countdown button again, or press the "HOLD" button (which will then require a second press to turn off if the load was already on).

6. Vzdrževanje

The Intermatic EC210WK Countdown Timer requires minimal maintenance.

7. Odpravljanje težav

If you experience issues with your EC210WK timer, refer to the following common problems and solutions:

TežavaMožen vzrokrešitev
Timer does not turn ON.No power to the timer; incorrect wiring; tripped circuit breaker.Check circuit breaker. Verify wiring connections (Hot, Neutral, Load, Ground). Ensure power is restored.
Load does not turn OFF after countdown.Timer is in "HOLD" mode; internal malfunction.Press the "HOLD" button to disengage. If issue persists, contact customer support.
LED indikatorji ne svetijo.Ni napajanja; okvarjena enota.Check power supply and wiring. If power is present and wired correctly, the unit may be faulty.
Timer makes noise.This timer is designed for silent operation. Noise indicates a potential issue.Immediately turn off power at the circuit breaker and contact customer support.

8. Specifikacije

Technical specifications for the Intermatic EC210WK Countdown Timer:

9. Garancija in podpora

Garancija: This Intermatic EC210WK Countdown Timer is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Podpora strankam: For technical assistance, warranty claims, or further information, please contact Intermatic customer service. Refer to the official Intermatic webspletno mesto za trenutne kontaktne podatke.

Prosimo, shranite dokazilo o nakupu za namene garancije.

Povezani dokumenti - EC210WK

Prejview Intermatic EC200WK/EC210WK In-Wall Timer Installation and Operation Guide
Comprehensive guide for installing and operating Intermatic EC200WK and EC210WK in-wall timers. Includes critical safety instructions, electrical ratings, step-by-step installation procedures, wiring diagrams, and operational modes for timed and continuous use.
Prejview Navodila za namestitev in uporabo elektronskega vgradnega odštevalnika časa Intermatic EI200
Podroben vodnik za namestitev in uporabo elektronskega vgradnega odštevalnika časa Intermatic EI200. Funkcije vključujejo časovno območje od 5 do 30 minut, način neprekinjenega zadrževanja in nazivne vrednosti za motorje splošnega namena 15 A, volframove žarnice z močjo 1000 W in motorje z močjo 1/4 KM. Vključuje informacije o garanciji.
Prejview Intermatic EI210 Elektronski stenski odštevalnik časa - Navodila za namestitev in uporabo
Celovit vodnik za elektronski vgradni odštevalnik časa Intermatic EI210, s podrobnimi funkcijami, koraki namestitve, načini delovanja (časovnik in zadrževanje) in informacijami o garanciji. Vključuje tehnične specifikacije in kontaktne podatke podjetja Intermatic Incorporated.
Prejview Intermatic EI205 Elektronski stenski odštevalnik časa: Navodila za namestitev in uporabo
Celovit vodnik za namestitev in uporabo elektronskega stenskega odštevalnika časa Intermatic EI205. Zajema funkcije, nazivne vrednosti, namestitev po korakih, načine delovanja in 1-letno omejeno garancijo. Idealen za nadzor razsvetljave in porabe s časovnim izklopom.
Prejview Intermatic EI220 Elektronski stenski odštevalnik časa: Navodila za namestitev in uporabo
Comprehensive guide for installing and operating the Intermatic EI220 electronic in-wall countdown timer. Covers features, electrical ratings, step-by-step installation, operational modes (Timer and Hold), and warranty information.
Prejview Intermatic EI200 Elektronski stenski odštevalnik časa - Navodila za namestitev in uporabo
Podroben vodnik za elektronski vgradni odštevalnik časa Intermatic EI200. Zajema funkcije, nazivne vrednosti, korake namestitve, načine delovanja (način časovnika, način zadrževanja) in 1-letno omejeno garancijo. Vključuje diagrame ožičenja in varnostna opozorila.