1. Uvod
Thank you for choosing the Intermatic ST01K Astronomic Digital In-Wall Timer. This advanced timer is designed to provide convenient and energy-efficient control of your lighting. Featuring astronomic capabilities, it automatically adjusts to daily sunrise/sunset changes and daylight saving time, ensuring your lights operate precisely when needed. Its unique design allows for installation without a neutral wire, making it ideal for retrofits and remodels. The ST01K supports both single-pole and 3-way applications and is compatible with LED, CFL, and incandescent lighting.
2. Pomembne varnostne informacije
WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in serious injury or death.
- Pred namestitvijo in uporabo natančno preberite vsa navodila.
- This device must be installed by a qualified electrician in accordance with all national and local electrical codes.
- Do not use this timer with appliances that could cause unsafe conditions if operated unattended (e.g., sunlamps, saunas, heaters, etc.).
- Prepričajte se, da so vse žične povezave varne in pravilno izolirane.
- Razpon delovne temperature: 32°F do 122°F (0°C do 50°C).
3. Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- Intermatic ST01K Astronomic Digital In-Wall Timer
- Priročnik z navodili za namestitev in uporabo
- Baterija CR2 (predhodno nameščena)
Note: A decorator style wall plate is sold separately and is required for a finished installation.
4. Nastavitev in namestitev
The ST01K timer is designed for easy installation in standard wall boxes and does not require a neutral wire, making it suitable for older homes or locations where a neutral wire is not readily available. It can be used in both single-pole and 3-way wiring configurations.
4.1 Wiring Diagram (Single-Pole Application)
- Izklopite napajanje: Locate the circuit breaker or fuse that controls the light switch you are replacing and turn it OFF. Verify power is off using a voltage tester.
- Odstranite staro stikalo: Previdno odstranite obstoječo stensko ploščo in stikalo iz stenske omarice. Odklopite žice s starega stikala.
- Prepoznajte žice: In a single-pole setup, you will typically have two hot wires (line and load) and a ground wire. The ST01K does not require a neutral wire.
- Povežite žice:
- Connect the timer's črna žica to the incoming line (hot) wire iz električne plošče.
- Connect the timer's rdeča žica do load wire going to the light fixture.
- Connect the timer's zelena žica do ozemljitvena žica in the wall box.
- Cap off any unused wires (e.g., the blue wire for 3-way applications) with a wire nut.
- Časovnik montaže: Carefully push the wired timer into the wall box. Secure it with the provided screws.
- Namestite stensko ploščo: Attach your decorator style wall plate (sold separately).
- Obnovi moč: Ponovno vklopite napajanje na odklopniku.
4.2 Wiring Diagram (3-Way Application)
For 3-way applications, the ST01K can replace one of the existing 3-way switches. The blue wire on the timer is used as the traveler wire. Refer to the detailed wiring diagrams provided in the physical manual for specific 3-way configurations, as they can vary.
An image showing the white Intermatic ST01K Astronomic Digital In-Wall Timer. The timer features a digital LCD display showing '12:00' and a large rocker switch below it. The unit is designed for in-wall installation, with metal mounting brackets visible on the top and bottom. The side of the unit shows the 'INTERMATIC INC' branding.
5. Navodila za uporabo
The ST01K timer features a large LCD display for easy readout and intuitive programming. It supports up to 20 ON/OFF events and includes astronomic, random, and automatic daylight saving time adjustment features.
5.1 Začetna namestitev in nastavitev časa
- Vklop: After installation, turn on the power at the circuit breaker. The display will illuminate.
- Nastavi trenutni čas: Press the 'CLOCK' button. Use the 'HOUR' and 'MIN' buttons to set the current time. Press 'DAY' to set the current day of the week. Press 'CLOCK' again to save.
- Set Location (Astronomic Feature): The astronomic feature requires setting your geographical location for accurate sunrise/sunset calculations. Refer to the full manual for detailed steps on setting your latitude and longitude or selecting a pre-programmed city.
- Poletni čas (DST): The timer automatically adjusts for Daylight Saving Time. Ensure this feature is enabled in the settings (refer to the full manual for menu navigation).
5.2 Programiranje dogodkov VKLOP/IZKLOP
The ST01K allows for up to 20 ON/OFF events. Events can be programmed for specific times or relative to sunrise/sunset (astronomic events).
- Vstopite v programski način: Press the 'PROG' button. The display will show '1 ON'.
- Nastavitev časa vklopa: Use 'HOUR', 'MIN', and 'DAY' buttons to set the desired ON time and days of the week for Program 1. You can select specific days, weekdays, weekends, or everyday.
- Nastavitev časa izklopa: Press 'PROG' again. The display will show '1 OFF'. Set the desired OFF time and days for Program 1.
- Dodaj več programov: Continue pressing 'PROG' to cycle through and set up to 20 ON/OFF programs.
- Izhod iz programskega načina: Press the 'CLOCK' button to exit program mode and return to normal operation.
5.3 Manual Override and Random Feature
- Ročna preglasitev: The large rocker switch on the timer allows for instant manual ON/OFF control, overriding the programmed schedule temporarily. The timer will resume its schedule at the next programmed event.
- Naključna funkcija: This feature can vary the programmed ON/OFF times by a few minutes (typically 0-30 minutes) to give your home a 'lived-in' appearance when you are away. Activate this feature through the timer's menu settings (refer to the full manual).
6. Vzdrževanje
The Intermatic ST01K timer is designed for long-lasting, maintenance-free operation. However, occasional care can ensure optimal performance.
- Čiščenje: Za čiščenje časovnika površino nežno obrišite z mehko krpoamp krpo. Ne uporabljajte abrazivnih čistil, topil ali čistil v spreju neposredno na enoto.
- Varnostno kopiranje baterije: The timer includes a CR2 battery for backup, preserving settings during power outages. The average battery life is approximately 8000 hours. If the display becomes dim or erratic during a power outage, the battery may need replacement. Refer to the full manual for battery replacement instructions.
7. Odpravljanje težav
If you experience issues with your ST01K timer, please consult the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Prikaz časovnika je prazen. | No power to the timer; battery depleted. | Check circuit breaker. Ensure wiring connections are secure. Replace backup battery if necessary. |
| Luči se ne vklopijo/izklopijo ob programiranih časih. | Incorrect programming; manual override engaged; wiring issue. | Verify programmed ON/OFF times and days. Check if manual override is active. Re-check wiring connections. |
| Astronomic feature is inaccurate. | Incorrect location setting. | Verify and correct the geographical location (latitude/longitude or city) setting in the timer's menu. |
| Časovnik se ne odziva na pritiske gumbov. | Začasna napaka v programski opremi; prazna baterija. | Try resetting the timer (refer to manual for reset procedure). Replace backup battery. |
If the problem persists after trying these solutions, please contact Intermatic Customer Support.
8. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številka modela | ST01K |
| barva | Bela |
| Material | Plastika |
| Mere izdelka (D x Š x V) | 5"D x 6.5"Š x 2.75"V |
| Teža predmeta | 4.8 unč |
| Število nastavitev | Do 20 dogodkov VKLOP/IZKLOP |
| Tip stikala | 1-smerni, 3-smerni |
| Vrsta namestitve | Stenski nosilec |
| Združljivost | LED, CFL, Incandescent lighting |
| voltage | 120 / 277 VAC |
| Uporovna obremenitev | 15A, 120/277VAC |
| Volframova obremenitev | 15A, 120 VAC; 6A, 208/277 VAC |
| Ballast Load | 8A, 120 VAC; 4A, 208/277 VAC |
| Obremenitev motorja | 1 HP, 120 VAC; 2 HP, 240 VAC |
| DC obremenitve | 4A, 12 VDC; 2A, 28 VDC |
| Vrsta baterije | 1 baterija CR2 (priložena) |
| Povprečna življenjska doba baterije | 8000 ur |
| Certifikati | Certifikat CSA |
9. Garancija in podpora
Intermatic products are designed for reliability and performance. This product comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty documentation included with your product or visit the official Intermatic webmesto.
Podpora uporabnikom
If you have any questions regarding the installation, operation, or troubleshooting of your Intermatic ST01K timer, please contact Intermatic Customer Support:
- Webspletno mesto: www.intermatic.com
- telefon: Glejte na webspletno mesto za trenutne kontaktne številke.
Please have your model number (ST01K) and purchase information ready when contacting support.
