1. Uvod
Hvala za nakupasing the KYORITSU Digital Light Meter Model 5202. This device is designed for accurate measurement of illuminance in various environments. It features a separated light receiving sensor for optimal positioning, multiple measurement ranges, and a clear digital display. Please read this manual thoroughly before use to ensure safe and correct operation.
2. Varnostne informacije
- Do not attempt to open or modify the device, except for battery replacement as described in this manual.
- Napravo hranite stran od vode, visoke vlažnosti in ekstremnih temperatur.
- Izogibajte se padcem naprave in je ne izpostavljajte močnim udarcem.
- Use only the specified battery type (9V alkaline battery).
- Baterije zavrzite v skladu z lokalnimi predpisi.
- Ensure the sensor is clean and free from obstructions for accurate readings.
3. Izdelek je končanview
The KYORITSU Digital Light Meter 5202 is a compact and versatile instrument for measuring light levels. Its key features include:
- 3-Range Switching: Measures illuminance from low to high levels (200/2000/20000 lux).
- Široko merilno območje: 0.1 to 19990 Lux.
- Funkcija zadrževanja podatkov: Zamrzne trenutno meritev na zaslonu.
- Separated Sensor: The light receiving sensor is separate from the main unit, allowing for flexible and optimal positioning during measurement, preventing interference from the user's shadow.
- Prilagoditev odmika: Allows for fine-tuning of readings.
- Velik LCD zaslon: Provides clear and easy-to-read digital measurements.
Slika 1: Spredaj view of the KYORITSU Digital Light Meter 5202 with dimensions.
Slika 2: Zadaj view of the KYORITSU Digital Light Meter 5202 with kickstand.
4. Nastavitev
4.1 Namestitev baterije
The device requires one 9V alkaline battery (included). To install or replace the battery:
- Prepričajte se, da je naprava izklopljena.
- Poiščite predal za baterije na zadnji strani enote.
- Remove the three screws securing the bottom bracket/back cover.
- Carefully pry open the side seams of the main unit using a small flathead screwdriver. This will reveal the internal circuit board and the battery connection.
- Priključite 9V baterijo na sponko za baterijo in pri tem upoštevajte pravilno polarnost.
- Place the battery into its compartment and carefully reassemble the unit, ensuring the side seams align properly before re-inserting the screws.
4.2 Povezava senzorja
The light receiving sensor is permanently attached via a cable. Ensure the cable is not damaged or kinked before use.
5. Navodila za uporabo
5.1 Vklop/izklop
Pritisnite MOČ gumb za vklop ali izklop naprave.
5.2 Izbira območja
The device offers three measurement ranges: 200, 2000, and 20000 Lux. Select the appropriate range using the RANGE button. Start with a higher range if the light intensity is unknown to avoid over-range readings.
5.3 Merjenje
- Vklopite napravo.
- Position the light receiving sensor at the point where illuminance is to be measured. Ensure the sensor surface is clean and directly facing the light source.
- Select the appropriate measurement range.
- Read the illuminance value displayed on the LCD screen.
5.4 Funkcija zadrževanja podatkov
Pritisnite PRIDRŽI button to freeze the current reading on the display. Press it again to release the hold and resume live measurement.
5.5 Offset Adjustment
The device includes an offset adjustment feature. Refer to the detailed instructions in the full product catalog or contact customer support for advanced calibration procedures if precise offset adjustment is required.
6. Vzdrževanje
6.1 Čiščenje
Wipe the device and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the sensor surface clean to ensure accurate readings.
6.2 Zamenjava baterije
Replace the 9V battery when the low battery indicator appears on the display or if the device fails to power on. Follow the steps outlined in Section 4.1 Battery Installation.
6.3 Shranjevanje
When not in use for extended periods, remove the battery to prevent leakage. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Odpravljanje težav
- Naprava se ne vklopi: Preverite namestitev baterije in se prepričajte, da je baterija dovolj napolnjena. Po potrebi jo zamenjajte.
- Netočne meritve: Ensure the sensor surface is clean and unobstructed. Verify the correct measurement range is selected. Check for any environmental factors affecting light.
- Na zaslonu se prikaže »OL« ali »OVER«: The light intensity exceeds the selected range. Switch to a higher measurement range.
- Zaslon je prazen ali utripa: Battery may be low or improperly installed. Replace the battery.
8. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Proizvajalec | KYORITSU |
| Številka modela | 5202 |
| Merilno območje | 0.1 do 19990 Lux |
| Razponi | 200 / 2000 / 20000 Lux |
| Teža predmeta | 300 g |
| Dimenzije izdelka | 148(L) × 71(W) × 36(D) mm |
| Vrsta baterije | 1 x 9V alkalna baterija (priložena) |
| Zadrževanje podatkov | ja |
| Nastavitev offset | ja |
| Prvi razpoložljivi datum (Amazon.co.jp) | 18. marec 2014 |
9. Garancija in podpora
This product is covered by the manufacturer's standard warranty. For warranty claims, technical support, or service, please contact your local KYORITSU distributor or refer to the official KYORITSU webZa kontaktne podatke obiščite spletno mesto. Za namene garancije shranite dokazilo o nakupu.
