1. Uvod in konecview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your ET2 Harmony E24506-91PC LED Pendant Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The ET2 Harmony pendant light features multiple bubble glass balls, each illuminated by an integrated LED. The individual pendants are suspended by adjustable cables, allowing for customization of the fixture's overall design and drop height. The fixture is designed for indoor use and is fully dimmable.
Image 1.1: The ET2 Harmony E24506-91PC LED Pendant Light, showcasing its design with multiple bubble glass spheres.
2. Varnostne informacije
WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned off at the circuit breaker or fuse box before installation, servicing, or changing any components. Consult a qualified electrician if you are unsure about the installation process.
- Ta izdelek mora v skladu z veljavnim kodeksom namestitve namestiti oseba, ki je seznanjena s konstrukcijo in delovanjem izdelka ter s temi nevarnostmi.
- Use only UL Listed wire connectors.
- Ne prekoračite navedene količinetage (120 voltov).
- Naprave ne spreminjajte na noben način.
- Vnetljive materiale hranite stran od svetilke.
- Med namestitvijo nosite zaščitna očala in rokavice.
3. Vsebina paketa
Carefully unpack the fixture and check that all components are present and undamaged. Retain all packaging materials until installation is complete.
- Pendant Light Fixture (Canopy with integrated LED pendants)
- Mounting Hardware (Mounting plate, screws, wire nuts)
- Navodila za uporabo (ta dokument)
4. Nastavitev in namestitev
Namestitev mora opraviti usposobljen električar ali oseba z izkušnjami na področju električnih napeljav.
4.1 Potrebno orodje (ni vključeno)
- Phillips izvijač za glavo
- Ploščati izvijač
- Odstranjevalci žice
- Električni trak
- Lestev
4.2 koraki namestitve
- Izklopite napajanje: Locate the circuit breaker or fuse box controlling the power to the installation location and turn off the power. Verify power is off using a voltage tester.
- Pripravite montažno površino: Ensure the junction box is securely mounted and capable of supporting the fixture's weight (approximately 11.07 pounds).
- Pritrdite montažno ploščo: Secure the fixture's mounting plate to the junction box using the provided screws.
- Izvedite električne povezave:
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box using a wire nut.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Prepričajte se, da so vse povezave varne in po potrebi izolirane z električnim trakom.
- Secure Fixture Canopy: Carefully push the wired connections into the junction box. Align the fixture canopy with the mounting plate and secure it using the provided screws.
- Adjust Pendant Lengths: The individual pendant cables are adjustable. To adjust, gently push the cable into the canopy's cable grip and pull to the desired length. Ensure all pendants are securely set before proceeding.
- Install Glass Balls: The bubble glass balls are pre-installed with LED bulbs. Ensure they are securely attached to their respective pendant cables.
- Obnovi moč: Ko je namestitev končana in so vse povezave varne, ponovno vzpostavite napajanje na odklopniku.
Image 4.1: Dimensional drawing of the ET2 Harmony E24506-91PC, indicating a 12.75-inch width and a maximum overall height of 126 inches.
Image 4.2: Detail of the fixture's polished chrome canopy and the attachment points for the adjustable pendant cables.
5. Navodila za uporabo
The ET2 Harmony E24506-91PC LED Pendant Light is designed for simple operation.
- Vklop/izklop: Luč upravljajte s standardnim stenskim stikalom, priključenim na tokokrog svetilke.
- Funkcija zatemnitve: This fixture is fully dimmable. For optimal performance, use with a compatible LED dimmer switch. Consult your electrician for dimmer compatibility.
6. Vzdrževanje
Redno vzdrževanje bo pomagalo ohraniti videz in funkcionalnost vaše viseče svetilke.
- Čiščenje: Pred čiščenjem izklopite napajanje. Uporabite mehko, suho ali rahlo mehko krpo.amp cloth to wipe the polished chrome finish and glass spheres. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Zamenjava LED: The integrated LED bulbs are designed for long life. If replacement is ever needed, contact ET2 customer support for guidance on obtaining compatible replacement parts. Do not attempt to replace LEDs with standard bulbs.
7. Odpravljanje težav
If you experience issues with your pendant light, refer to the following troubleshooting guide:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Lučka se ne prižge | Brez napajanja na napeljavo Ohlapna žična povezava Okvarjeno stensko stikalo | Check circuit breaker/fuse. Ensure power is on. Preverite, ali so vse žične povezave varne (ko je napajanje izklopljeno). Preverite stensko stikalo ali ga po potrebi zamenjajte. |
| Luč nepravilno utripa ali se zatemni | Nezdružljivo stikalo za zatemnitev Ohlapna žična povezava | Prepričajte se, da uporabljate zatemnilno stikalo, ki je združljivo z LED-sijalkami. Preverite vse žične povezave (pri izklopljenem napajanju). |
| Pendants are not level | Cable lengths are uneven | Adjust individual pendant cable lengths as described in Section 4.2. |
If the problem persists after attempting these solutions, contact ET2 customer support.
8. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | ET2 |
| Številka modela | E24506-91PC |
| Dimenzije (D x Š x V) | 12.75" x 12.75" x 3.75" (Canopy) Max Overall Height: 126" |
| Teža predmeta | 11.07 funtov |
| Material | Steklo, jeklo |
| Vrsta zaključka | Polished Chrome / Bubble Glass |
| Vrsta svetlobnega vira | LED |
| Število svetlobnih virov | 9 |
| Wattage | 13.5 W (skupaj) |
| voltage | 120 volta |
| Svetlost | 945 lumnov |
| Svetla barva | Topla bela (3000K) |
| Indeks barvnega upodabljanja (CRI) | 80+ |
| Vrsta namestitve | Polvgradna montaža / Stropna montaža |
| Posebna funkcija | Dimmable, Adjustable Cables |
| Notranja/zunanja uporaba | Notranja |
| Certificiranje | Na seznamu UL |
| Zahtevana montaža | ja |
9. Garancija in podpora
9.1 Informacije o garanciji
This ET2 Harmony E24506-91PC LED Pendant Light is covered by a 1-letna omejena garancija proizvajalca od datuma nakupa. Ta garancija krije napake v materialu in izdelavi pri normalni uporabi. Ne krije škode, ki nastane zaradi nepravilne namestitve, nesreče, napačne uporabe, zlorabe ali nepooblaščenih sprememb.
9.2 Podpora strankam
For technical assistance, warranty claims, or to order replacement parts, please contact ET2 customer support. Have your model number (E24506-91PC) and proof of purchase ready when contacting support.
You can find contact information for ET2 by visiting their official webspletno mesto ali prodajalec, kjer je bil izdelek kupljen.
