Uporabniški priročnik za vgrajeno brezžično stikalo Trust ACM-1000

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Trust ACM-1000 Wireless Built-in Switch. Please read this manual carefully before installation and use to ensure safe and correct operation. Keep this manual for future reference.

The Trust ACM-1000 is designed to wirelessly control lights or other electrical devices up to 1000W. Its compact design allows for discreet installation in various locations.

2. Varnostne informacije

OPOZORILO: Electrical installation should only be performed by a qualified electrician. Always disconnect power at the main fuse box before performing any electrical work.

• Pred namestitvijo ali vzdrževanjem se prepričajte, da je napajanje odklopljeno.
• Ne prekoračite največje obremenitve 1000 W.
• This device is designed for indoor use unless installed within an appropriate IP44 rated waterproof junction box for outdoor applications.
• Keep the device away from moisture, extreme temperatures, and direct sunlight.
• Naprave ne poskušajte popravljati ali spreminjati sami. Obrnite se na usposobljeno servisno osebje.

3. Izdelek je končanview

The Trust ACM-1000 is a compact wireless receiver designed to be integrated into your existing electrical system.

Slika 1: Spredaj view of the Trust ACM-1000 Wireless Built-in Switch. This image shows the compact, white casing of the switch, with visible wiring terminals at the bottom, a fuse compartment, and an indicator light. The overall design is circular with flat sides for mounting.

3.1 Komponente

• Napajalni priključki: For connecting live (L) and neutral (N) wires.
• Izhodni priključki: For connecting the device to be controlled (IN/OUT).
• Indikatorska lučka: Provides feedback on pairing status and operation.
• Predal za varovalke: Houses a replaceable fuse for overcurrent protection (T5A H250V).
• Gumb za seznanjanje: Used to link the switch with Trust Smart Home transmitters.

Slika 2: Od blizu view of the wiring terminals on the Trust ACM-1000. Labels for Live (L), Neutral (N), Input (IN), and Output (OUT) connections are clearly visible, indicating where electrical wires should be connected for power and load control.

Slika 3: Vrh view of the Trust ACM-1000, highlighting the fuse compartment labeled "T5A H250V" and the small indicator light. This view also shows the mounting tabs on the sides of the device.

Slika 4: Stran view of the Trust ACM-1000, showing its slim profile and mounting clips. This view emphasizes the compact nature of the device, suitable for discreet installations.

4. Nastavitev in namestitev

Before starting, ensure you have all necessary tools and that the power supply is disconnected.

4.1 Wiring the ACM-1000

1. Odklop napajanja: Turn off the main power supply at your circuit breaker. Verify with a voltage tester.
2. Pripravite žice: Strip approximately 8-10mm of insulation from the Live (L), Neutral (N), and load wires (IN/OUT).
3. Povežite vhodno napajanje:
   • Connect the main Live wire to the terminal marked L.
   • Connect the main Neutral wire to one of the terminals marked N.
4. Connect Load Output:
   • Connect the Neutral wire of your light/device to the other terminal marked N.
   • Connect the Live wire of your light/device to the terminal marked VEN.
   • If using an existing switch, connect the switched Live wire from the switch to the terminal marked IN.
5. Varna namestitev: Place the ACM-1000 in a suitable location such as a ceiling rose, junction box, or cabinet. Ensure it is securely mounted and wires are properly insulated.

Note: For outdoor use, the ACM-1000 must be installed inside an IP44-rated waterproof junction box to protect it from environmental elements.

4.2 Združevanje z oddajnikom

The ACM-1000 needs to be paired with a Trust Smart Home transmitter (e.g., remote control, wall switch, motion sensor) to function wirelessly.

1. Obnovi moč: Turn on the main power supply. The indicator light on the ACM-1000 should illuminate briefly.
2. Vstopite v način seznanjanja: Press the small pairing button on the ACM-1000 once. The indicator light will start flashing slowly.
3. Aktiviraj oddajnik: Within 10 seconds, press the 'ON' button (or the desired channel button) on your Trust Smart Home transmitter.
4. Potrditev: The indicator light on the ACM-1000 will flash rapidly a few times and then turn off, indicating successful pairing.
5. Test: Use the transmitter to switch the connected device ON and OFF.

To pair additional transmitters, repeat steps 2-4. The ACM-1000 can store up to 6 different pairing codes.

4.3 Deleting Pairing Codes

To delete a single pairing code or all stored codes:

• Delete Single Code: Press the pairing button on the ACM-1000 once. When the indicator light flashes slowly, press the 'OFF' button (or the desired channel button) on the transmitter you wish to unpair. The indicator light will flash rapidly and turn off.
• Izbriši vse kode: Press and hold the pairing button on the ACM-1000 for approximately 5 seconds until the indicator light flashes rapidly and then turns off. All stored pairing codes are now deleted.

5. Navodila za uporabo

Once installed and paired, the Trust ACM-1000 operates seamlessly with your Trust Smart Home transmitter.

• Prižgi: Press the 'ON' button on your paired transmitter. The connected device will turn on.
• Ugasnite: Press the 'OFF' button on your paired transmitter. The connected device will turn off.
• Manual Control (if applicable): If an existing wall switch is wired to the 'IN' terminal, you can still use it for manual control.

6. Vzdrževanje

• Čiščenje: Zunanjost naprave očistite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Zamenjava varovalke: If the connected device stops working and the indicator light does not illuminate, the fuse (T5A H250V) may need replacement. Always disconnect power before replacing the fuse. Use only fuses of the same type and rating.
• Brez delov, ki bi jih lahko servisiral uporabnik: Beyond fuse replacement, there are no user-serviceable parts inside.

7. Odpravljanje težav

8. Specifikacije

• Model: ACM-1000 (Manufacturer ID: 71015)
• Znamka: Zaupanje
• Napajanje: 220-240V ~, 50Hz
• Največja obremenitev: 1000 W (uporovna obremenitev)
• Varovalka: T5A H250V
• Radio frekvenca: 433.92 MHz
• Razpon: Up to 30 meters indoors (environment dependent)
• Dimenzije: 5.3 x 6.8 x 2.5 cm
• Teža: 60 g
• barva: Bela
• Stopnja zaščite: IP20 (for indoor use, requires IP44 enclosure for outdoor)

9. Garancija in podpora

Trust products are manufactured to high quality standards. In the unlikely event of a defect during the warranty period, please contact your retailer or the Trust customer support for assistance. Please retain your proof of purchase.

For the latest information, FAQs, and support, please visit the official Trust website or refer to the product page where you purchased the item.