Bogen BG-NR100

BOGEN BG-NR100 Night Ringer Instruction Manual

Model: BG-NR100 | Brand: Bogen

1. Uvod

1.1 izdelkov konecview

Bogen BG-NR100 Night Ringer device with connection terminals
The Bogen BG-NR100 Night Ringer is a compact device designed to provide an audible ring signal for paging systems. It responds to standard 90V telephone ring signals or external contact closures, producing a distinct dual-frequency electronic ringer tone. This unit is ideal for environments where telephone ring signals need to be amplified or integrated into a public address system, automatically muting background music during a ring event.

The Bogen BG-NR100 Night Ringer is an essential component for integrating telephone ringing into a paging or public address system. It is engineered to detect incoming telephone ring signals or external contact closures and generate a loud, clear electronic ringer tone. Its compact design and low current draw make it an efficient and reliable solution for various commercial and industrial applications.

1.2 Ključne lastnosti

2. Varnostne informacije

Please read all safety instructions carefully before installing or operating the Bogen BG-NR100 Night Ringer. Failure to follow these instructions may result in electric shock, fire, or other hazards.

2.1 Splošni varnostni ukrepi

2.2 Električna varnost

3. Nastavitev

3.1 Razpakiranje

Carefully remove the Night Ringer from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. If damage is found, contact your supplier immediately.

3.2 Montaža

The BG-NR100 is designed for surface mounting. Use appropriate screws (not supplied) to secure the unit to a wall or other stable surface using the mounting tabs on either side of the enclosure. Ensure the mounting location allows for adequate ventilation and access to connections.

3.3 Žične povezave

All connections are made via the screw terminal block located on the front of the unit. Ensure power is disconnected before making any wiring connections.

Oznaka terminalaOpisfunkcija
TEL RING (T, R)Telephone Ring InputConnect to the tip (T) and ring (R) lines of a standard 90V telephone ring signal source.
CONTACT RING (A, B)External Contact Closure InputConnect to a dry contact closure (e.g., from a relay or switch) to trigger the ringer.
POWER SUPPLY (+24, -24)Vhodna močConnect to a regulated 24V DC power supply. Observe polarity (+24V to +24, -24V to -24).
BGM SOURCE (A, B)Vnos glasbe v ozadjuConnect the background music source here. The unit will mute this input during a ring event.
AMP INPUT (A, B)Amplifier Input / Output to Paging SystemConnect this output to the input of your paging amplifier or public address system. This carries the ringer tone and the muted BGM.

4. Delovanje

4.1 Osnovna operacija

Once properly connected and powered, the BG-NR100 will automatically detect an incoming 90V telephone ring signal or a closure on the Contact Ring terminals. Upon detection, the unit will generate a dual-frequency electronic ringer tone and simultaneously mute any background music connected to the BGM Source input. The ringer tone will be sent to the Amp Input terminals for connection to your paging system.

4.2 Nadzor glasnosti

The ringer volume can be adjusted using the TONE VOL knob located on the top left of the unit. Rotate the knob clockwise to increase the volume and counter-clockwise to decrease it. Adjust the volume to a suitable level for your environment.

5. Vzdrževanje

5.1 Čiščenje

To clean the unit, wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners. Ensure the unit is powered off and disconnected from all sources before cleaning.

5.2 Splošna nega

The BG-NR100 is designed for reliable operation and requires minimal maintenance. Ensure it is installed in a location free from excessive dust, moisture, and extreme temperatures. Periodically check all wiring connections to ensure they are secure.

6. Odpravljanje težav

If you experience issues with your Bogen BG-NR100 Night Ringer, refer to the following table for common problems and solutions.

TežavaMožen vzrokrešitev
No ringer tone output.Na enoti ni napajanja.Check power supply connections and ensure 24V DC is present.
Incorrect or no input signal (TEL RING or CONTACT RING).Verify 90V ring signal on TEL RING or proper contact closure on CONTACT RING.
Gumb za glasnost je nastavljen prenizko.Adjust the TONE VOL knob clockwise.
Ringer tone is distorted or weak.Improper connection to paging amplifier.Zagotovite AMP INPUT is correctly connected to the amplifier input. Check ampnastavitve lifierja.
Background music does not mute.BGM SOURCE not connected correctly.Verify BGM SOURCE connections. Ensure the music source is routed through the Night Ringer.

If the problem persists after attempting these solutions, please contact Bogen technical support or a qualified service technician.

7. Specifikacije

Technical specifications for the Bogen BG-NR100 Night Ringer:

AtributVrednost
ProizvajalecBOGEN
ZnamkaBogen
Številka modelaBG-NR100
Teža predmeta1 funtov
Dimenzije izdelka1 x 5 x 3 palcev
FCC Registration NumberCD23CH-17566-KX-N
Enakovrednost zvonjenja1.1 B
Prvič na voljo27. november 2013

8. Garancija in podpora

8.1 Informacije o garanciji

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bogen website. Bogen Communications, Inc. typically provides a limited warranty against defects in materials and workmanship for a specified period from the date of purchase.

8.2 Tehnična podpora

If you require technical assistance or have questions regarding the installation or operation of your BG-NR100 Night Ringer, please contact Bogen technical support. Contact information can usually be found on the Bogen webmestu ali v embalaži izdelka.

Povezani dokumenti - BG-NR100

Prejview Vodnik za konfiguracijo vhodno/izhodnega krmilnika Bogen NQ-E7010 Nyquist
This guide provides comprehensive instructions for configuring the Bogen NQ-E7010 Nyquist Input/Output Controller. Learn to manage network settings, update firmware, access logs, and ensure secure access with the Bogen Digital Certification Authority.
Prejview Glavna nadzorna plošča Bogen MCP35A: Navodila za namestitev in uporabo
Ta priročnik vsebuje podrobne informacije o namestitvi, delovanju in tehničnih specifikacijah za glavno nadzorno ploščo Bogen MCP35A, vsestranski sistem za dvosmerno komunikacijo in distribucijo programov v različnih okoljih.
Prejview Bogen ACD2X2 AmpNavodila za namestitev vgradnih stropnih zvočnikov in garancija
Navodila za namestitev, podrobnosti o priključitvi in ​​informacije o garanciji za Bogen ACD2X2 ampVgradni stropni zvočnik z integriranim sistemom. Zajema električne priključke, stropno montažo za plošče 2x2 in 2x4 ter specifikacije izdelka.
Prejview Vodnik za konfiguracijo modula domofona Bogen Nyquist VoIP (NQ-GA10P, NQ-GA10PV)
Podroben vodnik za konfiguracijo domofonskih modulov Bogen Nyquist NQ-GA10P in NQ-GA10PV VoIP. Zajema nastavitev, omrežne nastavitve, posodobitve vdelane programske opreme in samostojno delovanje sistemov za IP-klicanje in distribucijo zvoka.
Prejview Bogen AS1, ASUG1(DK), ASWG1(DK) AmpNavodila za namestitev in uporabo stropnega zvočnika Lified
Navodila za namestitev in uporabo samodejnih naprav Bogen AS1, ASUG1(DK) in ASWG1(DK)ampKvalificirani 8-palčni stožčasti stropni zvočniki. Vsebuje opis izdelka, navodila za namestitev ohišij TB8 in RE84, električne povezave, nastavitve in informacije o omejeni garanciji.
Prejview Bogen NQ-GA20P2 Nyquist integrirani napajalnik AmpPriročnik za konfiguracijo lifierja
Konfiguracijski vodnik za integrirani napajalnik Bogen NQ-GA20P2 Nyquist z močjo 20 W ampprogram za vzdrževanje, ki zajema nastavitev, omrežne nastavitve, posodobitve vdelane programske opreme in prilagoditve parametrov DSP.