Legrand DX3 Miniaturni odklopnik (prot.dx3 indust.) 1-polni 6A Navodila za uporabo

1. Uvod

This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of your Legrand DX3 Miniature Circuit Breaker. This device is designed to protect electrical circuits from overcurrents, which can result from overload or short circuit. Please read this manual thoroughly before installation or use and retain it for future reference.

2. Varnostne informacije

OPOZORILO: Electrical work should only be performed by qualified and licensed professionals. Failure to follow these instructions can result in electric shock, fire, serious injury, or death.

• Always disconnect power at the main service panel before installing or servicing the circuit breaker.
• Preverite, ali voltage and current ratings of the circuit breaker match the requirements of your electrical system.
• Do not use the circuit breaker if it appears damaged.
• Prepričajte se, da so vse povezave tesne in varne, da preprečite pregrevanje.
• Upoštevajte vse lokalne in nacionalne električne predpise in predpise.

3. Izdelek je končanview

The Legrand DX3 Miniature Circuit Breaker is a single-pole thermal-magnetic device designed for DIN rail mounting. It provides protection against both overloads and short circuits in residential, commercial, and industrial applications. The 'C' curve indicates its tripping characteristics, suitable for general purpose applications with moderate inrush currents.

Slika 1: Spredaj view of the Legrand DX3 Miniature Circuit Breaker. This image displays the main body of the circuit breaker, including the toggle switch for operation, the 'DX3 C6' rating label, and the Legrand brand logo. The top and bottom terminals for wire connections are also visible.

Ključne značilnosti:

• Curve C: Provides thermal-magnetic protection suitable for general applications.
• Nazivni tok: 6 Amperes.
• Število polov: 1.
• Vrsta pritrditve: DIN Rail Mount.
• Prelomna zmogljivost: 10/16kA (kilioamperes).

4. Nastavitev in namestitev

Namestitev mora opraviti usposobljen električar v skladu z vsemi veljavnimi električnimi predpisi.

1. Odklop napajanja: Ensure the main power supply to the electrical panel is completely disconnected and locked out before beginning any work. Verify with a voltage tester.
2. Montaža: Clip the circuit breaker onto the DIN rail in the electrical panel. Ensure it is securely seated.
3. Wiring - Line Connection: Connect the incoming phase (line) wire to the top terminal of the circuit breaker. Strip the wire insulation to the recommended length (typically 10-12mm), insert it fully into the terminal, and tighten the screw firmly.
4. Wiring - Load Connection: Connect the outgoing phase (load) wire to the bottom terminal of the circuit breaker. Strip the wire insulation, insert it fully, and tighten the screw firmly.
5. Preverjanje: Dvakrat preverite vse povezave glede tesnosti in pravilne polarnosti. Prepričajte se, da nobena gola žica ni izpostavljena.
6. Zaprtje plošče: Close the electrical panel cover securely.
7. Obnovitev napajanja: Obnovite napajanje glavne servisne plošče.

5. Navodila za uporabo

The Legrand DX3 circuit breaker features a simple toggle switch for operation.

• Prižgati: Push the toggle switch upwards to the 'ON' position.
• Ugasniti: Push the toggle switch downwards to the 'OFF' position.
• Sproženo stanje: If an overload or short circuit occurs, the circuit breaker will automatically trip, moving the toggle switch to an intermediate or 'TRIPPED' position (often indicated by a red marker).
• Ponastavitev izklopljenega odklopnika: To reset a tripped breaker, first move the toggle switch fully to the 'OFF' position, then push it upwards to the 'ON' position. If the breaker immediately trips again, do not attempt to reset it repeatedly. Investigate the cause of the trip.

6. Vzdrževanje

The Legrand DX3 Miniature Circuit Breaker requires minimal maintenance. Regular inspections are recommended to ensure proper function.

• Periodični vizualni pregled: Annually, or as required by local codes, visually inspect the circuit breaker for any signs of damage, discoloration, or loose connections.
• Čiščenje: If necessary, gently clean the exterior of the circuit breaker with a dry, soft cloth. Do not use liquids or abrasive cleaners.
• Testiranje: While not typically required for residential circuit breakers, some industrial applications may require periodic functional testing. Consult relevant standards or a qualified electrician.

7. Odpravljanje težav

If your circuit breaker is not functioning as expected, consider the following:

• Breaker Trips Immediately After Reset: This indicates a persistent fault, likely a short circuit or severe overload. Immediately disconnect all loads from the circuit and consult a qualified electrician to identify and rectify the fault.
• Breaker Trips Intermittently: This could be due to an intermittent short circuit, an overloaded circuit (too many devices drawing power), or a faulty appliance. Try reducing the load on the circuit or isolating faulty appliances.
• Breaker Does Not Trip During a Fault: This is a serious safety concern. If you suspect the breaker is not providing protection, immediately disconnect power to the circuit and have the breaker inspected and replaced by a qualified electrician.
• Pregrevanje: If the breaker or surrounding area feels hot, it could indicate loose connections, an overloaded circuit, or an internal fault. Disconnect power and seek professional assistance.

8. Specifikacije

9. Garancija in podpora

For specific warranty information and technical support, please refer to the official Legrand webspletno mesto ali se obrnite neposredno na službo za stranke Legrand. Shranite račun kot dokazilo o nakupu.