Fender '68 Custom Twin Reverb AmpNavodila za uporabo lifier

1. Uvod in konecview

The Fender '68 Custom Twin Reverb Amplifier pays tribute to the classic look, sound, and performance of Fender's late '60s "silver face" amplifiers. Originally a transitional year for Fender amps, 1968 brought a fresh aesthetic with a silver and turquoise front panel and aluminum "drip edge" grille cloth trim, while maintaining the pure Fender tone. This amplifier is renowned for its clear, deep, and powerful sound, delivering big tube tone with world-class Fender reverb and vibrato effects.

The '68 Custom Twin Reverb features both channels with reverb and tremolo. The "custom" channel incorporates a modified Bassman tone stack, offering modern players enhanced tonal flexibility, especially when using pedals. It also provides quicker gain onset and reduced negative feedback for greater touch sensitivity. Equipped with dual 12-inch Celestion G12V-70 speakers, this amplifier delivers a distinctively rock 'n' roll flavor.

2. Ključne značilnosti

• Dual Channel Reverb and Tremolo: Both channels are equipped with reverb and tremolo effects, offering a vintage feel with modern versatility.
• Modified Bassman Tone Stack: The "custom" channel features a Bassman tone stack, providing enhanced tonal flexibility for use with various pedals.
• Celestion G12V-70 Speakers: Dual 12-inch Celestion G12V-70 speakers deliver a distinctively rock 'n' roll sound.
• Enhanced Responsiveness: Quicker gain onset and reduced negative feedback contribute to greater touch sensitivity.
• Priloženi dodatki: Comes with a fitted amplifier cover and a 2-button footswitch for convenient control of effects.

3. Nastavitev

3.1 Razpakiranje in namestitev

Previdno odstranite ampiz embalaže. Postavite ampNapravo postavite na stabilno, ravno površino. Zagotovite zadostno prezračevanje okoli enote, da preprečite pregrevanje. Izogibajte se postavljanju ampv bližini virov toplote ali na neposredni sončni svetlobi.

3.2 Napajalni priključek

1. Zagotovite ampStikalo za vklop naprave Liferier je v položaju "IZKLOP".
2. Connect the supplied power cord to the AC inlet on the rear panel of the amplifier.
3. Drugi konec napajalnega kabla priključite v ozemljeno vtičnico za izmenični tok.

3.3 Priključitev instrumenta

Connect your guitar or other instrument to one of the input jacks on the front panel using a high-quality instrument cable. The amplifier features two input jacks per channel (Custom and Vintage), typically labeled "1" (high gain) and "2" (low gain). Experiment to find the input that best suits your instrument's output level and desired tone.

3.4 Priključitev nožnega stikala

Connect the included 2-button footswitch to the "FOOTSWITCH" jack on the rear panel to enable remote control of the reverb and tremolo effects.

4. Navodila za uporabo

4.1 Vklop/izklop

1. Za vklop:
   • Ensure all volume controls are set to zero.
   • Flip the "POWER" switch to the "ON" position.
   • Wait approximately 30-60 seconds for the tubes to warm up.
   • Flip the "STANDBY" switch to the "ON" position.
   • Slowly raise the volume to your desired level.
2. Za izklop:
   • Lower all volume controls to zero.
   • Flip the "STANDBY" switch to the "OFF" position.
   • Wait a few seconds, then flip the "POWER" switch to the "OFF" position.

4.2 Kontrole sprednje plošče

The '68 Custom Twin Reverb features two distinct channels: a 'Custom' channel with a modified Bassman tone stack and a 'Vintage' channel for classic Fender tones. Both channels include Reverb and Tremolo.

• Inputs (1 & 2): Input 1 offers higher gain, while Input 2 provides lower gain.
• obseg: Controls the overall output level of the selected channel.
• Visoki toni: Prilagodi visokofrekvenčni odziv.
• Middle (Custom Channel Only): Prilagodi frekvenčni odziv srednjega območja.
• Bas: Prilagodi nizkofrekvenčni odziv.
• Odmev: Controls the intensity of the digital hall reverb effect.
• Speed (Tremolo): Prilagodi hitrost tremolo učinka.
• Intensity (Tremolo): Prilagodi globino učinka tremola.

4.3 Tone Shaping Tips

• For a classic clean Fender tone, start with Volume around 3-5, Treble and Bass at 5-7, and Reverb at 2-4.
• To achieve a natural tube overdrive, increase the Volume control. The amp will begin to break up as it gets louder.
• The 'Custom' channel's Bassman tone stack allows for more aggressive mid-range shaping, ideal for driving pedals.
• Experiment with the Speed and Intensity controls of the Tremolo to find your preferred modulation.

4.4 Predstavitveni videoposnetki izdelkov

5. Vzdrževanje

5.1 Splošna nega in čiščenje

• Obdrži amplifier očistite tako, da ga obrišete z mehko, suho krpo.
• Izogibajte se uporabi abrazivnih čistil ali topil, saj lahko poškodujejo premaz.
• Zaščitite amplifier from dust, moisture, and extreme temperatures.
• When transporting, use the included fitted amplifier cover to protect against scratches and impacts.

5.2 Zamenjava cevi

Vacuum tubes have a finite lifespan and will eventually need replacement. If you notice a decrease in performance, unusual noise, or a change in tone, it may be time to replace the tubes. It is recommended to have tube replacement and biasing performed by a qualified technician to ensure proper operation and safety.

5.3 Zamenjava varovalke

Če je amplifier fails to power on, check the main fuse located on the rear panel. Always replace a blown fuse with one of the exact same type and rating to prevent damage to the amplifier and ensure safety. Consult the specifications section for the correct fuse type.

6. Odpravljanje težav

• Ni zvoka:
  • Preverite vse kabelske povezave (napajanje, instrument, zvočnik).
  • Zagotovite amplifier is powered on and the standby switch is engaged.
  • Verify instrument volume and tone controls are not set to zero.
  • Check if the fuse has blown (refer to Maintenance section).
• Prekomerni hrup/brnenje:
  • Prepričajte se, da so vsi kabli pravilno zaščiteni in v dobrem stanju.
  • Poskusite priključiti amplifier into a different power outlet or a power conditioner.
  • Premakni ampIzdelek hranite stran od drugih elektronskih naprav, ki lahko povzročajo motnje.
  • Faulty tubes can cause noise; consider professional inspection.
• Šibek ali popačen zvok:
  • Check instrument cable for damage.
  • Verify speaker connection.
  • Tubes may be worn out or faulty; professional inspection is recommended.

7. Specifikacije

Spredaj view of the Fender '68 Custom Twin Reverb Ampoživitelj, razstavaasing its silver and turquoise front panel, aluminum "drip edge" grille cloth trim, and control knobs.

Stran view of the Fender '68 Custom Twin Reverb Amplifier, illustrating its physical dimensions: 10.38 inches depth, 19.88 inches height, and 26.16 inches width.

8. Garancija in podpora

For warranty information, product registration, and technical support, please visit the official Fender website or contact Fender customer service. Keep your proof of purchase for any warranty claims.

Uradni Fender Webspletno mesto: www.fender.com