Uporabniški priročnik za matično ploščo strežnika Supermicro X10SLM-FB LGA1150 MicroATX

1. Uvod

This manual provides comprehensive instructions for the installation, configuration, operation, and maintenance of the Supermicro X10SLM-F-B MicroATX Server Motherboard. Designed for reliable server performance, this motherboard supports Intel LGA1150 processors and features the Intel C224 PCH chipset, DDR3 memory, SATA3, USB 3.0, and dual Gigabit Ethernet. Please read this manual thoroughly before proceeding with installation and operation to ensure proper functionality and system stability.

2. Izdelek je končanview

The Supermicro X10SLM-F-B is a MicroATX server motherboard engineered for robust performance and reliability in server environments. Key features include:

• CPU vtičnica: LGA1150 for Intel Xeon E3-1200 v3/v4 series, 4th Gen Core i3, Pentium, Celeron processors.
• Čipset: Intel C224 PCH.
• Pomnilnik: 4x DDR3 DIMM slots supporting up to 32GB Unbuffered ECC DDR3 1600MHz.
• Razširitvene reže: 1x PCI-E 3.0 x16, 1x PCI-E 2.0 x4 (in x8 slot), 1x PCI-E 2.0 x4 (in x4 slot).
• Shranjevanje: 6x SATA3 (6Gbps) ports.
• Omrežje: Dual Gigabit Ethernet LAN ports (Intel i210AT).
• Integrirana grafika: Aspeed AST2400 BMC for IPMI 2.0 with KVM over IP.
• Vrata USB: USB 3.0 and USB 2.0 ports.

Slika 1: Supermicro X10SLM-F-B Motherboard Layout. This image displays the full layout of the motherboard, highlighting the LGA1150 CPU socket at the center, surrounded by four DDR3 DIMM slots (two blue, two black). To the left, multiple PCI-E expansion slots are visible. The bottom right features six SATA ports and USB 3.0 headers. The top section includes various I/O ports such as VGA, USB, and LAN. A yellow protective cap is present on the CPU socket, indicating the importance of its removal before CPU installation.

3. Nastavitev sistema

Follow these steps for proper installation of components onto your Supermicro X10SLM-F-B motherboard.

3.1 Namestitev procesorja

1. Pripravite vtičnico: Nežno dvignite ročico za nalaganje in odprite pokrov podnožja procesorja.
2. Odstranite zaščitni pokrovček: Carefully remove the yellow protective cap from the LGA1150 socket. Retain this cap for future use if the CPU is removed or the motherboard is returned.
3. Namestitev procesorja: Poravnajte trikotno oznako na procesorju z ustrezno oznako na podnožju. Previdno namestite procesor v podnožje, ne da bi ga silili.
4. Varna procesorska enota: Close the socket cover and press down the load lever until it locks into place.
5. Namestitev hladilnika procesorja: Attach the compatible LGA1150 CPU cooler according to its manufacturer's instructions.

3.2 Namestitev pomnilnika

The X10SLM-F-B supports DDR3 Unbuffered ECC DIMMs. For optimal performance, install memory modules in pairs.

1. Odprite sponke DIMM: Push open the white clips at both ends of the DIMM slots.
2. Align Memory: Poravnajte zarezo na pomnilniškem modulu DDR3 s ključem v reži DIMM.
3. Vstavi pomnilnik: Insert the module firmly into the slot until the clips snap into place, securing the module.

3.3 Priključitev naprave za shranjevanje

Connect your SATA storage devices (HDDs, SSDs) to the SATA3 (6Gbps) ports located on the motherboard.

• Use SATA data cables to connect storage devices to the available SATA ports.
• Ensure power cables from the power supply are connected to each storage device.

3.4 Napajalni priključek

Connect the power supply unit (PSU) to the motherboard.

• Connect the 24-pin ATX main power connector to the corresponding slot on the motherboard.
• Connect the 8-pin (or 4-pin) ATX 12V CPU power connector to the slot near the CPU socket.

4. Navodila za uporabo

4.1 Konfiguracija BIOS-a/UEFI-ja

The BIOS (Basic Input/Output System) or UEFI (Unified Extensible Firmware Interface) allows you to configure system settings. To access the BIOS/UEFI setup utility:

• Vklopite sistem.
• Pritisnite DEL key repeatedly during the Power-On Self-Test (POST) to enter the BIOS/UEFI setup.
• Navigate through the menus using arrow keys and make necessary adjustments for boot order, SATA mode (AHCI/RAID), and other system parameters.
• Save changes and exit to restart the system.

4.2 Namestitev operacijskega sistema

After configuring the BIOS/UEFI, you can proceed with installing your preferred operating system (e.g., Windows Server, Linux distributions).

1. Pripravite namestitveni medij: Create a bootable USB drive or DVD with your operating system installation files.
2. Nastavitev vrstnega reda zagona: In BIOS/UEFI, set the boot priority to your installation media.
3. Namestitev operacijskega sistema: Follow the on-screen prompts to install the operating system.
4. Namesti gonilnike: After OS installation, install all necessary drivers for the motherboard components (chipset, LAN, graphics, etc.) from the Supermicro webspletnega mesta ali priloženega diska z gonilniki.

5. Vzdrževanje

5.1 Čiščenje

Redno čiščenje pomaga ohranjati optimalno delovanje in podaljšuje življenjsko dobo vaše matične plošče.

• Ugasniti: Always power down and unplug the system before cleaning.
• Odstranjevanje prahu: Use compressed air to gently remove dust from components, especially heatsinks and fan blades. Hold fans to prevent over-spinning.
• Čiščenje površine: Narahlo uporabite mehko krpo, ki ne pušča vlaken dampened with isopropyl alcohol to clean non-conductive surfaces if necessary. Avoid direct contact with sensitive components.

5.2 Posodobitve vdelane programske opreme

Supermicro periodically releases BIOS and IPMI firmware updates to improve stability, compatibility, and add new features. Refer to the Supermicro official website for the latest firmware versions and detailed update procedures.

• Posodobitev BIOS-a: Typically performed via a USB drive or a utility within the BIOS.
• IPMI Firmware Update: Can often be updated through the IPMI web interface. Note that some advanced IPMI features, such as KVM over IP BIOS updates, may require an activation key.

6. Odpravljanje težav

V tem razdelku so rešitve za pogoste težave, na katere lahko naletite.

• Brez napajanja:
  • Prepričajte se, da so vsi napajalni kabli (24-pinski ATX, 8-pinski CPU) varno priključeni.
  • Verify the power supply unit (PSU) is switched on and functioning correctly.
  • Preverite povezave stikala za vklop na sprednji plošči z matično ploščo.
• Brez zaslona:
  • Confirm the monitor is connected to the correct video output (onboard VGA or discrete graphics card).
  • Reseat memory modules and expansion cards.
  • Check for POST beep codes (refer to Supermicro documentation for specific codes).
• Nestabilnost/zrušitve sistema:
  • Verify memory modules are correctly installed and compatible.
  • Check CPU and chipset temperatures.
  • Prepričajte se, da so vsi gonilniki nameščeni in posodobljeni.
  • Zaženite orodja za diagnostiko pomnilnika.
• Operacijski sistem se ne zažene:
  • Check BIOS/UEFI boot order settings.
  • Verify storage device connections.
  • Ensure the operating system installation is not corrupted.

For more detailed troubleshooting, consult the official Supermicro X10SLM-F-B manual available on the Supermicro website or contact Supermicro technical support.

7. Specifikacije

8. Garancija in podpora

8.1 Informacije o garanciji

Supermicro products typically come with a limited manufacturer's warranty. The duration and terms of the warranty may vary by region and reseller. Please refer to the warranty card included with your product or visit the official Supermicro webza najnovejše in podrobne informacije o garanciji.

Za uveljavljanje garancije shranite dokazilo o nakupu.

8.2 Tehnična podpora

For technical assistance, driver downloads, BIOS updates, and further documentation, please visit the official Supermicro support webspletno mesto:

www.supermicro.com/support/

When contacting support, please have your motherboard model (X10SLM-F-B) and serial number ready.