1. Uvod
The HID RK40 iCLASS SE Smart Card Reader with Keypad is a versatile access control device designed for secure identification. It supports 13.56 MHz contactless smart card technology and offers dual authentication options: contactless card presentation combined with a Personal Identification Number (PIN), or single-factor authentication using either a card or a PIN. The keypad features a durable, weatherproof design with tactile response and backlit numbering, suitable for various environmental conditions.
2. Varnostne informacije
- Pred namestitvijo in uporabo natančno preberite vsa navodila.
- Namestitev mora opraviti usposobljeno osebje v skladu z lokalnimi električnimi predpisi.
- Pred kakršnim koli ožičenjem ali vzdrževanjem se prepričajte, da je napajanje izklopljeno.
- Do not expose the device to extreme temperatures or corrosive substances beyond its specified operating conditions.
- Use only approved power supplies and cables.
3. Vsebina paketa
Preverite, ali so v paketu prisotni vsi elementi:
- HID RK40 iCLASS SE Smart Card Reader with Keypad
- Montažna oprema (vijaki, sidra)
- Navodila za namestitev (ta dokument)
4. Izdelek je končanview
The image below illustrates the front and rear views of the HID RK40 reader, highlighting its keypad and wiring connections.
This image displays both the front and back of the HID RK40 reader. The front features a black housing with a numeric keypad (0-9, *, #) and the HID logo. The back reveals the product label, indicating 'iCLASS SE RK40', and a multi-colored wiring harness for connection to an access control panel.
The front panel includes a 12-position keypad for PIN entry and an integrated smart card reader. The rear panel contains the wiring connections for power, data, and control signals.
5. Nastavitev
5.1 Montaža
- Select a suitable mounting location, ensuring it is flat and secure.
- Use the provided mounting template (if applicable) to mark drilling points.
- Izvrtajte vodilne luknje za pritrdilne vijake.
- Route the wiring through the wall or mounting surface.
- Secure the reader to the mounting surface using the provided screws. Do not overtighten.
5.2 Ožičenje
Connect the reader to the access control panel according to the panel's specifications and the wiring diagram below. Ensure all connections are secure and insulated.
| Barva žice | funkcija | Opis |
|---|---|---|
| Rdeča | moč (+) | Connect to +5VDC to +16VDC power supply. |
| Črna | Tla (-) | Connect to power supply ground. |
| zelena | Data 0 (Wiegand) | Wiegand Data 0 output. |
| Bela | Data 1 (Wiegand) | Wiegand Data 1 output. |
| Rjava | LED nadzor | Controls the reader's LED indicator. |
| Oranžna | Nadzor piskanja | Controls the reader's audible beeper. |
| Rumena | Drži | Input for holding card data. |
| Modra | OSDP Data (RS-485) | OSDP communication line. |
| Vijolična | OSDP Data (RS-485) | OSDP communication line. |
Note: Specific wiring configurations may vary based on the access control system. Refer to your system's documentation for detailed instructions.
6. Navodila za uporabo
6.1 Card Presentation
To gain access using a smart card:
- Present your iCLASS SE smart card within close proximity to the reader's front surface.
- The reader will emit an audible beep and/or illuminate an LED to indicate a successful read.
- If configured for card-only access, the access control system will grant or deny access based on the card's credentials.
6.2 PIN Entry (Keypad)
For systems requiring PIN entry (either standalone or combined with a card):
- If required, present your smart card first (refer to 6.1).
- Enter your Personal Identification Number (PIN) using the numeric keypad.
- Press the '#' key (or as configured by your system) to confirm the PIN entry.
- The reader will provide feedback (beep/LED) indicating acceptance or rejection of the PIN.
7. Vzdrževanje
- Čiščenje: Clean the reader's surface periodically with a soft, damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
- Pregled: Regularly inspect the reader for any signs of physical damage or loose connections.
- Vdelana programska oprema: Consult your system administrator for information on firmware updates.
8. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Bralnik se ne vklopi. | Ni napajanja; napačna ožičenje. | Preverite napajalne priključke in zagotovite pravilno glasnosttage. Verify wiring according to Section 5.2. |
| Card not read. | Card not compatible; card damaged; incorrect presentation. | Ensure card is iCLASS SE compatible. Try another card. Present card closer to the reader. |
| PIN entry not accepted. | Incorrect PIN; system not configured for PIN. | Verify the correct PIN. Consult your system administrator to confirm PIN configuration. |
| No LED or audible feedback. | LED/Beeper control wiring issue; disabled in system. | Check Brown and Orange wire connections. Consult system administrator for configuration. |
Če težave vztrajajo, se obrnite na tehnično podporo.
9. Specifikacije
- Model: RK40
- Tehnologija: 13.56 MHz iCLASS SE Smart Card
- Povezljivost: Wiegand, OSDP (RS-485), USB Type A (for configuration/diagnostics)
- Dimenzije: 7.1 x 4.7 x 1.8 palca (180.34 x 119.38 x 45.72 mm)
- Teža: 10.7 unče (303.34 gramov)
- Napajanje: +5VDC do +16VDC
- Posebna lastnost: Waterproof keypad
- Okoljska certifikacija: RoHS, OEEO
- Proizvajalec: HID Global Corporation
10. Informacije o garanciji
HID Global Corporation warrants its products against defects in materials and workmanship under normal use and service for a specified period from the date of purchase. For detailed warranty terms and conditions, please refer to the official HID Global website or contact your authorized distributor. This warranty does not cover damage caused by improper installation, misuse, unauthorized modification, or acts of nature.
11. Tehnična podpora
For technical assistance, troubleshooting, or further information regarding the HID RK40 iCLASS SE Smart Card Reader with Keypad, please contact HID Global Technical Support or your local authorized HID Global partner. Support resources, including FAQs and documentation, may also be available on the official HID Global webmesto.
