Taco 006-ST4

Navodila za uporabo obtočne črpalke iz nerjavečega jekla Taco 006-ST4 1/40 HP 115V

1. Uvod in konecview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Taco 006-ST4 1/40 HP 115V Stainless Steel Circulator Pump. The Taco 006-ST4 is designed for circulating water in various heating and cooling applications, particularly where corrosion resistance is critical. Its self-lubricating design enhances reliability by eliminating the need for a mechanical seal.

2. Varnostne informacije

WARNING: To reduce the risk of electric shock, always disconnect power to the unit before installation, servicing, or maintenance. Refer to the complete instruction manual for proper installation procedures. This equipment is for indoor use only and must be installed by a qualified professional. Not for use in swimming pool or marine areas.

  • Always ensure the power supply matches the pump's voltage zahteve (115V).
  • Do not operate the pump without water. Dry running can cause severe damage.
  • Ensure all plumbing connections are secure and leak-free to prevent water damage.
  • Med namestitvijo in vzdrževanjem nosite ustrezno osebno zaščitno opremo (OZO).
  • Observe all local codes and regulations for electrical and plumbing installations.

3. Značilnosti izdelka

The Taco 006-ST4 Circulator Pump offers several key features:

  • Self-Lubricating Design: Eliminates the need for a mechanical seal, improving long-term reliability and reducing maintenance.
  • Konstrukcija iz nerjavečega jekla: Provides excellent corrosion resistance, making it suitable for a wide range of water circulation applications.
  • Kompaktna zasnova: Facilitates installation in confined spaces.
  • Tiho delovanje: Engineered for minimal noise during operation.
  • Neprekinjena dolžnost: Designed for reliable, continuous performance.

4. Nastavitev in namestitev

Proper installation is crucial for the optimal performance and longevity of your Taco 006-ST4 circulator pump. Always refer to the detailed installation instructions provided in the full product manual for specific guidance.

Splošna navodila za namestitev:

  1. Montaža: The pump should be mounted securely in a horizontal position with the motor housing level. Ensure adequate clearance for wiring and future maintenance.
  2. Cevovodi: Connect the pump to the system piping using appropriate fittings. Ensure that the system is clean and free of debris before connecting the pump.
  3. Električne povezave: All electrical wiring must be performed by a qualified electrician in accordance with local and national electrical codes. Ensure the power supply is disconnected before making any connections. The pump requires a 115V, 60Hz power supply.
  4. Polnjenje sistema: After installation, fill the system with water and thoroughly purge all air to prevent dry running and cavitation.
Taco 006-ST4 Stainless Steel Circulator Pump with visible wiring compartment and specifications label

Slika 1: Spredaj view of the Taco 006-ST4 Circulator Pump, showing the motor, pump housing, and electrical connection box. Key specifications like HP, Amps, Volts, Max Press, and Max Water Temp are visible on the label.

Taco 006-ST4 Circulator Pump with approximate dimensions labeled as 6 inches by 6 inches by 4 inches

Slika 2: Dimenzionalno view of the Taco 006-ST4 Circulator Pump, indicating approximate measurements of 6 inches in height, 6 inches in width, and 4 inches in depth for installation planning.

5. Navodila za uporabo

Once properly installed and the system is filled and purged of air, the Taco 006-ST4 pump is designed for straightforward operation.

  1. Vklop: Restore electrical power to the pump. The pump will begin circulating water immediately.
  2. Nadzor sistema: Observe the system for proper flow and ensure there are no leaks. Listen for any unusual noises, which could indicate air in the system or an obstruction.
  3. Temperatura in tlak: Ensure the system's operating temperature and pressure remain within the pump's specified limits (Max Press: 125 PSI, Max Water Temp: 220 °F / 104 °C).

The pump is designed for continuous duty, meaning it can operate for extended periods without interruption.

6. Vzdrževanje

The Taco 006-ST4 circulator pump features a self-lubricating design, which significantly reduces maintenance requirements. Regular inspection is generally sufficient to ensure continued reliable operation.

  • Letni pregled: Periodically inspect the pump for any signs of leaks, corrosion, or unusual wear.
  • Preverjanje hrupa: Listen for any changes in operating noise. Increased noise can indicate air in the system, cavitation, or potential motor issues.
  • Električne povezave: Prepričajte se, da so vse električne povezave tesne in brez korozije.
  • Čiščenje: Keep the exterior of the pump clean and free of dust or debris to ensure proper heat dissipation.

No user-serviceable parts are inside the sealed motor housing. For any internal issues, contact a qualified service technician.

7. Odpravljanje težav

This section addresses common issues you might encounter with your circulator pump. For complex problems, consult a qualified professional.

TežavaMožen vzrokrešitev
Črpalka se ne zažene ali tečeNo power; tripped circuit breaker; faulty wiring; seized impellerCheck power supply and circuit breaker. Verify wiring connections. Consult a technician if impeller is seized.
Brez ali nizek pretokAir in system; closed valves; clogged impeller; incorrect pump sizePurge air from the system. Open all necessary valves. Inspect for clogs. Ensure pump is correctly sized for application.
Prekomerni hrup ali tresljajiAir in system (cavitation); loose mounting; foreign object in pump; worn bearingsPurge air from system. Tighten mounting bolts. Disconnect power and inspect impeller for obstructions. Contact service for worn bearings.
Leaking from pumpLoose connections; damaged gaskets/O-rings; cracked housingTighten pipe connections. Replace damaged gaskets/O-rings. A cracked housing requires pump replacement.

8. Specifikacije

Detailed technical specifications for the Taco 006-ST4 Circulator Pump:

SpecifikacijaVrednost
Številka modela006-ST4
Konjske moči (HP)1 / 40 HP
voltage115 V
Ampstarost0.52 Amps
Pogostost60 Hz
RPM3250 RPM
Največji tlak125 PSI
Najvišja temperatura vode220 °F (104 °C)
MaterialNerjaveče jeklo
Vrsta ohišjaVrsta 2
RazredRazred H
Približne dimenzije (D x Š x V)6 cm x 6 cm x 4 cm
Teža predmeta1 funt (16 unč)
Vir napajanjaElektrični
Stran view of the Taco 006-ST4 Circulator Pump held in a hand for scale, showing a height of 5.7 inches or 14 cm

Slika 3: Stranski profesionalecfile of the Taco 006-ST4 Circulator Pump, illustrating its compact size with a height of approximately 5.7 inches (14 cm).

9. Garancija in podpora

Taco products are manufactured to high standards and typically come with a limited warranty. While specific warranty terms may vary, the Taco 006-ST4 is generally covered by a manufacturer's warranty, often for a period of three years from the date of purchase, covering defects in materials and workmanship.

For warranty claims, technical support, or service inquiries, please contact Taco customer service or your authorized dealer. Keep your proof of purchase and product model information readily available when contacting support.

Kontaktni podatki: Refer to the official Taco webNajnovejše kontaktne podatke najdete na spletnem mestu ali v dokumentaciji, ki je priložena izdelku.

Povezani dokumenti - 006-ST4

Prejview Taco 1911ecm ECM High-Efficiency Circulator Instruction Sheet
Instruction sheet for the Taco 1911ecm ECM High-Efficiency Circulator, covering installation, operation, controller functions, specifications, and troubleshooting. Learn about its features, safety guidelines, and maintenance.
Prejview Navodila za uporabo kartušnih cirkulatorjev Taco Plumb n' Plug serije "00"
Comprehensive instructions for installing and operating Taco's Plumb n' Plug (PNP) "00" Series cartridge circulators. This guide details application, pump control options, benefits like water conservation and comfort, sizing guidelines, plumbing installation procedures, and programming instructions for both analog and digital timers. It also includes a limited warranty statement.
Prejview Navodila za uporabo in ožičenje preklopnega releja Taco SR501-4
Podrobna navodila za uporabo preklopnega releja Taco SR501-4, ki zajemajo funkcije, delovanje, sheme ožičenja, specifikacije, odpravljanje težav in informacije o garanciji za strokovnjake za ogrevanje, prezračevanje in klimatizacijo.
Prejview Navodila za visoko učinkovito obtočno črpalko Taco 0026e ECM
Instruction sheet for the Taco 0026e ECM High-Efficiency Circulator, detailing its features, applications, installation, wiring, programming, and troubleshooting. This variable speed circulator offers significant energy savings and replaces older single and 3-speed models.
Prejview Taco Domestic Hot Water Recirculation Systems: Application, Selection & Installation Guide
A comprehensive guide to Taco's Domestic Hot Water Recirculation (DHWR) systems, detailing their application, selection process, and installation. Learn how to achieve instant hot water, conserve water and energy, and choose the right Taco product for residential use.
Prejview Navodila za uporabo preklopnega releja Taco SR506
Instruction sheet for the Taco SR506 Switching Relay, detailing wiring diagrams, operation, priority settings, jumper placement, power input, external diagnostics, and specifications for both Cold Start Boiler and Tankless Coil Boiler applications. Includes features and manufacturer information.