JJC TMC LCD Timer Remote Control Instruction Manual

Uvod

The JJC TMC LCD Timer Remote Control is a versatile device designed for advanced camera control, functioning as both a remote shutter release and a programmable intervalometer. It is ideal for various photography techniques, including time-lapse, long exposure, and self-portraits, by preventing camera shake and offering precise timing control.

Konec izdelkaview

Komponente in krmilniki

Familiarize yourself with the main components and controls of your JJC TMC remote control:

Slika 1: Spredaj view of the JJC TMC remote control with key components labeled, including the control panel, shutter release button, LED light/lock button, arrow buttons, timer start/stop button, and SET button.

Slika 2: Detailed diagram illustrating the numbered parts of the JJC TMC controller and the various indicators on its LCD screen, such as selection cursor, timer display, LOCK indicator, low power indicator, timer active indicator, speaker ON/OFF, SET indicator, RELEASE indicator, and number of shots.

Indikatorji LCD zaslona

• DE: Delay Timer (initial delay before sequence starts)
• BU: Bulb Timer (long exposure duration)
• INT: Interval Timer (time between shots)
• N: Number of Shots (total exposures)
• Izbirni kurzor: Indicates the currently adjustable parameter.
• Prikaz časovnika: Shows current time settings.
• LOCK Indicator: Appears when buttons are locked.
• Indikator nizke moči: Opozori, ko je baterija skoraj prazna.
• Timer Active Indicator: Shows when a timer sequence is running.
• VKLOP/IZKLOP zvočnika: Označuje stanje zvočnih povratnih informacij.
• SET Indicator: Appears when a setting is being adjusted.
• RELEASE Indicator: Appears when the shutter is being released.

Nastavitev

1. Namestitev baterije

1. Poiščite predal za baterije na zadnji strani daljinskega upravljalnika.
2. Odprite pokrov baterije.
3. Vstavite dve bateriji AAA in pazite na pravilno polarnost (+/-).
4. Varno zaprite pokrov baterije.

2. Povezovanje s kamero

1. Ensure both the camera and the remote control are powered off.
2. Locate the remote control terminal on your Canon EOS camera (refer to your camera's manual for exact location).
3. Insert the remote control's cable plug firmly into the camera's remote control terminal.
4. Power on the remote control using the ON/OFF switch.

Slika 3: The JJC TMC remote control connected to a Canon camera via its cable, demonstrating proper connection for operation.

Navodila za uporabo

Basic Shutter Release Function

• Pritisk do polovice: Press the Shutter Release Button halfway down to activate autofocus.
• Celoten tisk: Press the Shutter Release Button completely down to trigger the camera's shutter.
• Shutter Lock (for Bulb mode): For long exposures in Bulb mode, press the Shutter Release Button fully down and slide it upwards to lock it. This keeps the shutter open until you slide it back down.

Programming Timer Functions

The remote control allows programming of four main timer functions: Delay (DE), Bulb (BU), Interval (INT), and Number of Shots (N).

1. Vklop: Vklopite daljinski upravljalnik s stikalom za VKLOP/IZKLOP.
2. Select Parameter: Uporabite Puščični gumbi (up/down) to move the selection cursor between DE, BU, INT, and N on the LCD display.
3. Prilagodi vrednost: Once a parameter is selected, press the Gumb SET. The digits will flash. Use the Puščični gumbi (left/right) to select the digit to change, and the Puščični gumbi (up/down) to adjust the value (hours, minutes, seconds).
4. Potrdite nastavitev: Pritisnite Gumb SET ponovno za potrditev vrednosti in premik na naslednjo števko ali parameter.
5. Set Number of Shots (N): For 'N', you can set a value from 1 to 399. To set for unlimited shots, select 'N' and adjust until '--' is displayed.
6. Start Timer Sequence: Ko nastavite vse želene parametre, pritisnite Gumb za zagon/ustavitev časovnika to begin the programmed sequence. The 'TIMER ACTIVE' indicator will appear.
7. Stop Timer Sequence: Pritisnite Gumb za zagon/ustavitev časovnika again to stop an active sequence.

Funkcija zaklepanja

To prevent accidental button presses during a timer sequence or long exposure, press the LED lučka/gumb za zaklepanje. The 'LOCK' indicator will appear on the LCD. Press it again to unlock.

Funkcija osvetlitve ozadja

Pritisnite LED lučka/gumb za zaklepanje briefly to activate the LCD backlight for visibility in low-light conditions. The backlight will automatically turn off after a few seconds.

Vzdrževanje

• Čiščenje: Za čiščenje daljinskega upravljalnika uporabljajte mehko, suho krpo. Ne uporabljajte tekočih čistil ali topil.
• Zamenjava baterije: When the low power indicator appears, replace both AAA batteries promptly to ensure optimal performance.
• Shranjevanje: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
• Skrb za kabel: Avoid bending or twisting the connection cable excessively to prevent damage.

Odpravljanje težav

Remote control does not power on:

Check if batteries are inserted correctly with proper polarity. Replace with fresh AAA batteries.

Camera does not respond to shutter release:

Ensure the cable is securely connected to both the remote and the camera. Verify the camera is powered on and in a compatible shooting mode (e.g., P, Av, Tv, M, Bulb). Check camera battery level.

Timer sequence does not start or stops unexpectedly:

Confirm all timer parameters (DE, BU, INT, N) are set correctly. Ensure the 'TIMER ACTIVE' indicator is on. Check battery level. Note that turning off the remote control will reset all programmed settings.

LCD-zaslon je zatemnjen ali prazen:

Replace batteries. Use the backlight function in low light conditions.

Specifikacije

Garancija in podpora

Za informacije o garanciji in tehnično podporo se obrnite na uradno spletno stran JJC. webspletno mesto ali se obrnite na prodajalca. Za uveljavljanje garancije shranite račun.