Navodila za uporabo infrardečega termometra Testo 0560 8312 830-T1

1. Uvod

This manual provides essential instructions for the safe and effective use of the Testo 0560 8312 830-T1 IR Thermometer. This device is designed for non-contact measurement of surface temperatures in various industrial and trade applications. It features 12:1 optics and a dual laser for precise targeting, allowing for accurate temperature readings even on smaller objects from a safe distance.

2. Varnostne informacije

Please read this section carefully before operating the device to ensure safe and proper use.

• Do not point the laser directly into eyes or at other people.
• Naprave ne uporabljajte v eksplozivnem okolju.
• Protect the device from extreme temperatures, impacts, and strong vibrations.
• Napravo hranite čisto in suho.
• Napravo uporabljajte samo za predvideni namen, kot je opisano v tem priročniku.
• Popravila naj izvaja le pooblaščeno osebje.

3. Izdelek je končanview

The Testo 830-T1 IR Thermometer is a handheld device designed for quick and accurate non-contact temperature measurements.

Figure 1: Testo 830-T1 Infrared Thermometer with included battery.

Slika 2: Spredaj view of the Testo 830-T1, showing the display, measurement trigger, and control buttons.

3.1 Komponente

• Infrardeči senzor: Located at the front of the device, used for non-contact temperature measurement.
• Dvojni laserski kazalci: Two laser dots indicate the measurement spot size.
• Zaslon: Shows temperature readings, measurement units, battery status, and other indicators.
• Sprožilec meritve: Aktivira merjenje in laser.
• Gumbi za upravljanje: For navigating menus, adjusting settings (e.g., emissivity, units), and accessing functions like MIN/MAX.
• Predal za baterije: Located in the handle for battery installation.

4. Nastavitev

4.1 Namestitev baterije

1. Poiščite pokrovček predalčka za baterije na ročaju termometra.
2. Odprite pokrov.
3. Insert two AAA batteries, ensuring correct polarity (+/-). The device requires 2 AAA batteries, which are included.
4. Trdno zaprite pokrov prostora za baterije.

4.2 Initial Power-On and Unit Selection

Upon first use or after battery replacement, the device will power on. You may need to select your preferred temperature unit (Celsius or Fahrenheit).

• To change units: Typically, this involves pressing and holding a specific button (often the 'Mode' or 'Set' button, or an arrow button) while the device is off, then powering it on, or accessing a menu option. Refer to the on-screen prompts or the official Testo documentation for the exact procedure for your specific device firmware, as methods can vary.

5. Navodila za uporabo

5.1 Merjenje

1. Point the infrared sensor towards the target object.
2. Press and hold the measurement trigger. The dual laser pointers will activate, indicating the measurement spot.
3. The temperature reading will appear on the display.
4. Release the trigger to hold the last measured value (HOLD function).

Figure 3: The Testo 830-T1 in use, measuring the surface temperature of a radiator.

5.2 Understanding 12:1 Optics and Dual Laser

The 12:1 optics mean that at a distance of 12 inches, the measurement spot diameter is 1 inch. The dual laser pointers converge at the center of this measurement spot, helping you accurately identify the area being measured. This is particularly useful for measuring smaller objects or from a greater distance.

5.3 Funkcija MIN/MAX

The device can display the minimum and maximum temperatures recorded during a continuous measurement. This function is useful for monitoring temperature fluctuations over a period.

• To activate MIN/MAX: Press the appropriate button (refer to your device's specific button layout, often an arrow or 'Mode' button) while taking a measurement. The display will cycle through current, minimum, and maximum values.

5.4 Nastavitev emisivnosti

Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. For accurate readings, adjust the emissivity setting on your thermometer to match the material being measured. Common emissivity values:

• 0.95 (default for many devices): Most organic materials, painted surfaces, water, plastic.
• 0.85-0.90: Concrete, brick, rough wood.
• 0.60-0.70: Polished metals (can vary significantly).

Consult an emissivity table for specific materials. Incorrect emissivity settings will lead to inaccurate temperature readings.

6. Vzdrževanje

6.1 Čiščenje

To ensure optimal performance and longevity, keep the device clean.

• Wipe the device exterior with a clean, damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Carefully clean the infrared lens with a soft, lint-free cloth or a lens cleaning wipe. Avoid scratching the lens.

6.2 Zamenjava baterije

When the battery indicator on the display shows low power, replace the batteries promptly to avoid interruption of operation. Follow the battery installation steps in Section 4.1.

6.3 Shranjevanje

Store the thermometer in a dry, dust-free environment within the recommended temperature range (refer to specifications). If storing for extended periods, remove the batteries to prevent leakage.

7. Odpravljanje težav

If you encounter issues with your Testo 830-T1, refer to the following common problems and solutions:

• Naprava se ne vklopi:
  • Preverite, ali so baterije pravilno vstavljene s pravilno polarnostjo.
  • Zamenjajte baterije z novimi.
• Netočne meritve:
  • Ensure the infrared lens is clean.
  • Verify the emissivity setting matches the target material.
  • Ensure the measurement distance is appropriate for the target size (12:1 optics).
  • Avoid measuring through glass or highly reflective surfaces.
• Laser ni viden:
  • Preverite nivo baterije.
  • Ensure the measurement trigger is pressed.

If problems persist, contact Testo customer support for assistance.

8. Specifikacije

9. Garancija in podpora

For warranty information, technical support, or service inquiries, please contact Testo SE & Co. directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's official webmesto.

Proizvajalec: Testo SE & Co.

Za garancijske zahtevke shranite dokazilo o nakupu.