NETGEAR DOCSIS 3.0 Cable Modem Router (CG3000D-100NAS) Instruction Manual

1. Uvod

The NETGEAR CG3000D DOCSIS 3.0 Cable Modem Router is designed to provide high-performance wired and wireless connectivity for home and small business networks. This device supports blazing-fast data transfers, Voice over IP (VoIP), High-Definition (HD) media streaming, and online gaming. It features four Gigabit Ethernet ports for maximum wired speeds and Wireless-N 300 for exceptional range and speed. This model is specifically compatible with Charter internet services.

2. Navodila za namestitev

Follow these steps to set up your NETGEAR CG3000D-100NAS Cable Modem Router:

1. Razpakirajte napravo: Carefully remove the modem router and all accessories from its packaging.
2. Priključite koaksialni kabel: Connect one end of the coaxial cable (not included) to the cable wall outlet and the other end to the Cable port on the back of the modem router. Ensure the connection is finger-tight.
3. Priključite napajanje: Plug the power adapter into the modem router's Power input and then into an electrical outlet. The power LED on the front of the device should illuminate.
4. Vklop: Press the Power On/Off button on the back of the device. Allow several minutes for the modem router to boot up and establish a connection with your Internet Service Provider (ISP). The Internet LED on the front panel should turn solid green or blue once connected.
5. Connect a Computer (Optional for initial setup): For initial configuration or wired access, connect an Ethernet cable from one of the yellow Gigabit Ethernet LAN ports on the modem router to the Ethernet port on your computer.
6. Aktiviraj pri ponudniku internetnih storitev: Contact your Internet Service Provider (Charter) to activate your new modem router. You will need to provide the Serial Number and MAC Address, which are typically found on a label on the bottom of the device.
7. Nastavitve usmerjevalnika za dostop (neobvezno): Once activated, you can access the router's configuration page by opening a web browser on a connected computer and typing 192.168.0.1 into the address bar. The default username is typically admin in privzeto geslo je password. Refer to the label on the device for specific login credentials.
8. Konfiguriraj Wi-Fi: From the router's configuration page, navigate to the Wi-Fi settings to change the network name (SSID) and set a strong password for your wireless network.

Slika 1: Spredaj view of the NETGEAR CG3000D-100NAS Cable Modem Router.

Slika 2: Zadaj view of the NETGEAR CG3000D-100NAS Cable Modem Router, showing Ethernet LAN ports, USB port, coaxial cable connector, power adapter input, and power on/off button.

Figure 3: Detailed diagram illustrating the Ethernet LAN ports, USB port, coaxial cable connector, power adapter input, and power on/off button on the NETGEAR CG3000D-100NAS.

3. Upravljanje modema in usmerjevalnika

The NETGEAR CG3000D-100NAS provides both wired and wireless connectivity. It supports Wireless-N 300 for wireless devices and includes four Gigabit Ethernet ports for high-speed wired connections. This allows multiple devices to connect simultaneously for various activities such as streaming, gaming, and general internet browsing.

Understanding Router and Modem Functionality

4. Vzdrževanje

To ensure optimal performance and longevity of your NETGEAR CG3000D-100NAS, consider the following maintenance tips:

• Redni ponovni zagoni: Periodically reboot your modem router (unplug from power for 30 seconds, then plug back in) to refresh its connection and clear any temporary issues.
• Umestitev: Place the modem router in a central location, away from obstructions and other electronic devices that may cause interference.
• Hraniti prezračeno: Ensure the device has adequate ventilation to prevent overheating. Do not cover the ventilation openings.
• Posodobitve vdelane programske opreme: Check the NETGEAR support website for any available firmware updates for your model. Keeping the firmware updated can improve performance and security.

5. Odpravljanje težav

If you encounter issues with your NETGEAR CG3000D-100NAS, try the following troubleshooting steps:

• Ni internetne povezave:
  • Preverite, ali so vsi kabli varno priključeni.
  • Power cycle the modem router (unplug for 30 seconds, then plug back in).
  • Ensure your ISP has activated the modem router.
  • Check the status of the Internet LED on the front panel. If it's not solid green/blue, there might be an issue with your ISP connection.
• Slow Wireless Speeds or Dropped Connections:
  • Try moving closer to the modem router to improve signal strength.
  • Reduce interference by moving other electronic devices away from the modem router.
  • Access the router's configuration page (192.168.0.1) and ensure Wi-Fi settings are optimized.
  • Perform a 30/30/30 reset (hold reset button for 30 seconds, unplug for 30 seconds, plug back in and hold reset for another 30 seconds) to restore factory defaults. Note: This will erase all custom settings.
• Cannot Access Router Configuration Page:
  • Ensure your computer is connected directly to the modem router via an Ethernet cable.
  • Potrdite, da uporabljate pravilen IP-naslov (192.168.0.1) and login credentials (default: admin/password).
  • Počisti svoje web predpomnilnik in piškotke brskalnika ali poskusite z drugim brskalnikom.

6. Specifikacije

7. Garancija in podpora

This NETGEAR CG3000D-100NAS Cable Modem Router is specifically compatible with Charter internet services. Please note that NETGEAR technical support does not provide direct support for this model. For technical assistance related to its operation or connectivity, please contact Charter customer support.

This product typically comes with a 30-day warranty from the seller. Please refer to your purchase documentation for specific warranty terms and conditions.