Uporabniški priročnik za Cameo Light CLP64RGB10BS LED PAR žaromet

1. Uvod

Thank you for choosing the Cameo Light CLP64RGB10BS LED PAR Headlight. This device is designed for professional lighting applications, offering vibrant RGB color mixing and flexible control options. This manual provides essential information for safe and efficient operation, setup, and maintenance of your PAR headlight.

2. Varnostna navodila

• Pred uporabo naprave v celoti preberite ta priročnik.
• Ta priročnik shranite za poznejšo uporabo.
• Napravo vedno priključite na ozemljeno električno vtičnico.
• Naprave ne izpostavljajte dežju ali vlagi.
• Zagotovite zadostno prezračevanje okoli enote, da preprečite pregrevanje.
• Izogibajte se neposredni izpostavljenosti oči viru svetlobe.
• Pred čiščenjem ali servisiranjem izključite iz električnega omrežja.
• Popravila naj izvaja samo usposobljeno osebje.

3. Vsebina paketa

Ob razpakiranju preverite, ali so vsi predmeti prisotni:

• Cameo Light CLP64RGB10BS LED PAR Headlight
• Mounting Brackets (2 strokes)
• Navodila za uporabo (ta dokument)
• Napajalni kabel

4. Izdelek je končanview

The Cameo Light CLP64RGB10BS features 183 ultra-bright 10mm LEDs (60 red, 60 green, 63 blue) housed in a durable black casing. It includes a control panel for mode selection and DMX connectivity.

Slika 4.1: Spredaj view of the Cameo Light CLP64RGB10BS LED PAR Headlight, showing the LED array and included power cable.

Slika 4.2: Stran view of the PAR headlight, illustrating its compact design and ventilation slots.

Slika 4.3: Zadaj view showing the control panel with LED display, mode buttons, DMX IN, and DMX OUT ports.

Slika 4.4: Podrobno view of the 10mm LED array, highlighting the individual red, green, and blue diodes.

5. Nastavitev

5.1 Montaža

The CLP64RGB10BS comes with two mounting brackets for versatile installation. These brackets can be used to stand the unit on a flat surface or to attach it to a truss or lighting stand using appropriate clamps (not included). Ensure the mounting surface or structure can safely support the weight of the fixture.

5.2 Napajalni priključek

Connect the supplied power cable to the power input on the rear of the unit and then to a standard grounded electrical outlet. The device operates on standard AC power.

5.3 DMX povezava (neobvezno)

For DMX control, connect a DMX controller to the DMX IN port using a 3-pin DMX cable. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on. Terminate the last unit in the chain with a DMX terminator if experiencing signal issues.

6. Delovanje

6.1 Nadzorna plošča

The control panel on the rear of the unit (refer to Figure 4.3) features an LED display and three buttons: MODE, UP, and DOWN. These buttons are used to navigate menus and adjust settings.

• NAVODILA: Cycles through the main menu options and confirms selections.
• UP: Increases values or moves up through menu options.
• DOL: Decreases values or moves down through menu options.

6.2 Načini delovanja

The CLP64RGB10BS supports several operating modes:

• DMX način: Allows external control via a DMX controller. The unit can be set to 4 or 6 DMX channels.
• Glavni/podrejeni način: One unit acts as the master, controlling other slave units. Connect DMX OUT of the master to DMX IN of the first slave, and so on.
• Samostojni način: The unit operates independently using pre-programmed settings or sound-activated programs.

6.3 načinov DMX kanala

The device offers two DMX channel configurations:

• 4-kanalni način: Typically controls Red, Green, Blue intensity, and Master Dimmer/Strobe.
• 6-kanalni način: Provides more granular control, often including Red, Green, Blue intensity, Master Dimmer, Strobe, and Color Macros or other effects.

Refer to the DMX occupation diagram printed on the unit (Figure 4.3) for pin assignments: 1: Ground, 2: Signal (-), 3: Signal (+).

6.4 Sound-to-Light Functionality

In Standalone mode, the unit can react to music via its built-in microphone. Use the control panel to select sound-activated programs and adjust sensitivity if available.

7. Vzdrževanje

7.1 Čiščenje

Regular cleaning helps maintain optimal light output and extends the lifespan of the unit. Disconnect power before cleaning.

• Use a soft, lint-free cloth to wipe the exterior casing.
• For the LED lens, use a soft cloth lightly dampened with a mild glass cleaner. Avoid harsh chemicals.
• Prepričajte se, da so prezračevalne odprtine brez prahu in umazanije.

7.2 Shranjevanje

When not in use, store the PAR headlight in a dry, dust-free environment, preferably in its original packaging or a protective case.

8. Odpravljanje težav

9. Specifikacije

10. Garancija in podpora

Cameo products are designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Cameo website. For technical support, service, or spare parts, please contact your local dealer or the Cameo customer service department.

Prosimo, shranite dokazilo o nakupu za morebitne garancijske zahtevke.