AEM AEM AE-07082

AEM AE-07082 DryFlow Air Filter User Manual

Model: AE-07082

Znamka: AEM

This manual provides essential information for the installation, maintenance, and general use of your AEM DryFlow Air Filter.

Konec izdelkaview

The AEM DryFlow Air Filter is a high-performance, washable, and reusable synthetic air filter designed to optimize airflow and filtration for your vehicle. It requires no oil for maintenance, simplifying the cleaning process and ensuring durable service.

AEM AE-07082 DryFlow Air Filter

Image: AEM AE-07082 DryFlow Air Filter, showcasing its rectangular shape and red filter media.

Ključne značilnosti

  • Designed to increase horsepower and throttle response.
  • Captures up to 99% of harmful contaminants.
  • Offers outstanding performance even in dusty racing conditions.
  • Proizvedeno v ZDA.
Diagram of AEM DryFlow Air Filter components

Slika: Podrobna view of the AEM DryFlow Air Filter highlighting its key components: 1. Dryflow Air Filter (synthetic media, no oil required), 2. OE Specific Molding (creates a tight seal), and 3. Aluminum Wire Meshing (straightens and smooths airflow).

White car on a road, illustrating increased horsepower

Image: A white car on a road, representing the filter's design to increase horsepower.

Close-up of filter media with 'MADE IN THE USA' text

Image: Close-up of the filter media, emphasizing that the product is 'MADE IN THE USA'.

Namestitev

This section provides general guidance for installing your AEM DryFlow Air Filter. For detailed, vehicle-specific instructions, please refer to the official installation manual provided by AEM.

Prenesite uradni priročnik za namestitev (PDF)

Splošni koraki namestitve

  1. Locate your vehicle's airbox.
  2. Open the airbox and carefully remove the existing air filter.
  3. Insert the AEM DryFlow Air Filter into the airbox, ensuring the OE Specific Molding creates a tight seal.
  4. Close and secure the airbox lid.
  5. Verify all connections are secure before operating the vehicle.
Person installing an AEM DryFlow Air Filter into a vehicle's airbox

Image: A hand demonstrating the ease of installation by placing the AEM DryFlow Air Filter into a vehicle's airbox.

Vzdrževanje

The AEM DryFlow Air Filter is designed for easy maintenance and long service life. Unlike oiled filters, it requires no oil for cleaning.

Navodila za čiščenje

  1. Remove the air filter from the vehicle's airbox.
  2. Gently tap the filter to dislodge any loose debris.
  3. Rinse the filter with water from the clean side (inside) to the dirty side (outside) to push contaminants out.
  4. Use a mild, non-foaming detergent if necessary, and rinse thoroughly.
  5. Allow the filter to air dry completely before reinstallation. Do not use compressed air or heat to dry, as this may damage the filter media.
AEM DryFlow Air Filter being rinsed with water

Image: The AEM DryFlow Air Filter being cleaned with water, demonstrating its washable and reusable nature without requiring oil.

Regular cleaning ensures optimal airflow and filtration performance.

Specifikacije

AtributPodrobnost
ZnamkaAEM
ModelAE-07082
Številka dela OEMAE-07082
oblikaPravokotna
Teža predmeta2.3 funtov
Filter materialSynthetic (Oil-Free)
Učinkovitost filtracijeCaptures up to 99% of harmful contaminants
Ponovno uporabnostWashable and Reusable
Lokacija izdelaveZDA
Close-up of thick 3D filter media

Slika: Bližnji posnetek view of the thick 3D media, designed for increased airflow and dirt capacity.

Odpravljanje težav

If you encounter issues with your AEM DryFlow Air Filter, consider the following common troubleshooting steps:

  • Zmanjšana zmogljivost: Ensure the filter is clean and free of excessive debris. A clogged filter can restrict airflow. Verify the filter is properly seated in the airbox, creating a tight seal.
  • Nenavadni zvoki: Check for proper installation. An improperly seated filter or airbox lid can cause air leaks and unusual sounds.
  • Lučka za preverjanje motorja: While rare, an improperly installed air filter or a damaged Mass Air Flow (MAF) sensor during installation can trigger a check engine light. Re-check installation and consult a professional if the light persists.
  • Poškodba filtra: Inspect the filter for any tears or damage to the media or molding. A damaged filter should be replaced to ensure proper filtration.

For persistent issues or specific technical support, please contact AEM customer service.

Garancija in podpora

AEM products are manufactured to high standards. For information regarding product warranty, claims, or technical support, please refer to the official AEM webspletno mesto ali se obrnite neposredno na njihovo službo za stranke.

Visit AEM Official Webmesto

Povezani dokumenti - AEM AE-07082

Prejview Navodila za namestitev AEM 21-8128DC za Ford F150 EcoBoost letnik 2015
Podroben vodnik za namestitev sistema za sesanje zraka AEM 21-8128DC za modela Ford F150 EcoBoost 2.7-litrski in 3.5-litrski turbo letnik 2015. Vključuje seznam delov in navodila po korakih.
Prejview Navodila za namestitev dovoda hladnega zraka AEM 21-813C za Chevrolet Malibu 1.5T
Podroben priročnik za namestitev sistema za dovod hladnega zraka AEM 21-813C Dryflow v modelih Chevrolet Malibu letnikov 2016–2018 z motorjem 1.5T. Vključuje seznam delov, potrebno orodje in informacije o garanciji.
Prejview Navodila za namestitev sesalnega sistema Dryflow AEM 21-8017
Podrobna navodila za namestitev sesalnega sistema AEM 21-8017 Dryflow za modela Chevrolet Silverado in GMC Sierra letnika 2004–2005 z motorjem V8-6.6L DSL, vključno s seznamom delov in informacijami o garanciji.
Prejview AEM 21-759C Cold Air Intake Installation Instructions for Lexus IS250/IS350 (2014-2017)
Detailed installation guide for the AEM 21-759C Dryflow Cold Air Intake system designed for 2014-2017 Lexus IS250 and IS350 models. Includes parts list, step-by-step instructions, and maintenance information.
Prejview Navodila za namestitev nadomestnega zračnega filtra AEM
Helpful hints and instructions for installing your AEM replacement air filter, ensuring proper fitment and performance.
Prejview How to Convert AEM TestPro REMOTE to MAIN Unit
Step-by-step guide from AEM on how to temporarily convert a TestPro REMOTE unit to a MAIN unit to increase productivity for specific network testing tasks.