Bogen Classic C10 Ampuporabniški priročnik za lifier

1. Izdelek je končanview

The Bogen Classic Series C10 Amplifier is designed to provide dependable audio performance and flexibility for various applications. This model is rated at 10 watts RMS output power and is UL and CSA listed, ensuring compliance with safety standards. It features discreet complementary transistor circuitry for maximum reliability of its power output stages.

C10 amplifier is part of a series that includes models with music-on-hold (MOH) output capabilities, though the C10 specifically focuses on amplification. It offers screw terminal connections for 600 Ohm 1 volt and 8 Ohm at 1 watt, along with a rear panel level control for easy adjustment.

Slika 1: Spredaj view of the Bogen Classic C10 Amplifier, showing the main controls and branding.

2. Lastnosti

• RMS izhodna moč: 10 Watts, suitable for various audio setups.
• Frekvenčni odziv: Wide range from 70 Hz to 16 kHz for clear audio reproduction.
• Nizko popačenje: Total Harmonic Distortion (THD) of 1% ensures high-fidelity sound.
• Robust Circuitry: Designed with discreet complementary transistor circuitry for enhanced reliability.
• Prilagodljive povezave: Screw terminal connections for 600 Ohm 1 volt and 8 Ohm 1 watt outputs.
• Adjustable Level Control: Conveniently located on the rear panel for output level management.
• Treble Equalizer: Built-in equalizer mode for treble adjustment.
• Potrdilo o varnosti: UL and CSA listed for assured safety and quality.

3. Varnostne informacije

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the unit.

• vir energije: Povežite amplifier only to the type of power source indicated on the marking label.
• Prezračevanje: Ensure adequate ventilation. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Voda in vlaga: Naprave ne izpostavljajte dežju ali vlagi. Ne uporabljajte je v bližini vode.
• Toplota: Ne nameščajte v bližini virov toplote, kot so radiatorji, grelniki, peči ali druge naprave (vključno z amplifiers), ki proizvajajo toploto.
• Servisiranje: Za vse servise se obrnite na usposobljeno servisno osebje. Servis je potreben, če je bil aparat kakor koli poškodovan, na primer poškodovan je napajalni kabel ali vtič, je bila polita tekočina ali so v aparat padli predmeti, je bil aparat izpostavljen dežju ali vlagi, ne deluje normalno , ali je bil opuščen.
• Čiščenje: Pred čiščenjem ta izdelek izključite iz stenske vtičnice. Ne uporabljajte tekočih čistil ali čistil v obliki aerosolov. Uporabite oglasamp krpo za čiščenje.

4. Vsebina paketa

Upon opening the package, verify that all components are present and in good condition. The standard package for the Bogen Classic C10 Amplifier typically includes:

• Bogen Classic C10 Ampenota lifier
• Napajalni kabel
• Uporabniški priročnik (ta dokument)

If any items are missing or damaged, please contact your dealer or Bogen customer support immediately.

5. Nastavitev

Follow these steps to set up your Bogen Classic C10 Ampdvigalo:

1. Umestitev: Postavite amplifier on a stable, flat surface with adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
2. Priključki zvočnikov: Connect your speakers to the appropriate screw terminals on the rear panel. The C10 supports 8 Ohm at 1 watt speaker connections. Ensure correct polarity (+ to + and - to -) for optimal sound.
3. Vhodne povezave: Priključite svoj avdio vir (npr. mešalnik, prednastavitev)amplifier) to the input terminals. The amplifier provides screw terminal connections for 600 Ohm 1 volt input sources.
4. Napajalni priključek: Zagotovite amplifier's power switch is in the OFF position. Connect the power cord to the amplifier's power inlet, then plug the other end into a suitable AC power outlet.
5. Začetne nastavitve: Before powering on, ensure all volume/level controls on the amplifier are set to their minimum position to prevent sudden loud sounds.

6. Navodila za uporabo

Ko je ampKo je polnilnik nastavljen, sledite tem korakom za delovanje:

1. Vklop: Flip the power switch on the front panel to the ON position. The power indicator light should illuminate.
2. Adjust Input Source: Ensure your audio source is playing.
3. Adjust Level Control: Slowly increase the level control knob on the rear panel until the desired output volume is achieved. Avoid setting the level too high, which can cause distortion.
4. Prilagoditev visokih tonov: Use the treble equalizer control to fine-tune the high-frequency response of your audio.
5. Ugasniti: When finished, turn the level control down, then flip the power switch to the OFF position.

7. Vzdrževanje

Proper maintenance ensures the longevity and optimal performance of your Bogen Classic C10 Amplifier.

• Čiščenje: Redno čistite zunanjost amplifier with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the unit is unplugged and completely dry before reconnecting power. Do not use harsh chemicals or abrasive cleaners.
• Prezračevanje: Občasno preverite, ali so prezračevalne odprtine brez prahu in umazanije. Za čiščenje morebitnih blokad uporabite mehko krtačo ali stisnjen zrak.
• Shranjevanje: Če shranjujete amplifier for an extended period, ensure it is kept in a cool, dry place, away from direct sunlight and extreme temperatures.
• Pregled kabla: Periodically inspect all connected cables (power, input, speaker) for any signs of wear, fraying, or damage. Replace damaged cables immediately.

8. Odpravljanje težav

If you encounter issues with your Bogen Classic C10 AmpZa odpravljanje težav glejte naslednji vodnik za odpravljanje težav:

If the problem persists after trying these solutions, please contact Bogen customer support or a qualified service technician.

9. Specifikacije

10. Garancija in podpora

Bogen Communications International, Inc. provides a limited warranty for its products. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bogen webmesto.

For technical support, service, or inquiries regarding your Bogen Classic C10 Amplifier, please contact Bogen customer support through their official channels. Have your model number (BG-C10) and serial number (if applicable) ready when contacting support.

Spletni viri: For additional information, FAQs, and product updates, visit the official Bogen webmesto.