Uvod
The Electro-Voice EVID 6.2T is a high-performance, two-way surface-mount loudspeaker designed for various installation applications. It features dual 6-inch woofers and a 1-inch tweeter, providing clear audio reproduction across a wide frequency range. This model includes 70V/100V transformer taps for flexible integration into commercial audio systems and is housed in a weather-resistant enclosure, making it suitable for both indoor and outdoor use. The speaker also incorporates overload protection for enhanced durability and reliability.
Kaj je v škatli
- One pair of Electro-Voice EVID 6.2T Loudspeakers
Nastavitev in namestitev
Pravilna namestitev je ključnega pomena za optimalno delovanje in varnost. Priporočljivo je, da namestitev izvede usposobljen strokovnjak.
Montaža
The EVID 6.2T is designed for surface mounting. Ensure the mounting surface is structurally sound and capable of supporting the speaker's weight (approximately 34.3 pounds per speaker). Use appropriate hardware for secure attachment. The weather-resistant enclosure allows for outdoor installation, but ensure all connections are properly sealed and protected from direct water exposure.
This image displays the front of the Electro-Voice EVID 6.2T speaker. It features two 6-inch woofers positioned vertically, with a horn-loaded tweeter located between them. The speaker enclosure is black and designed for surface mounting.
Ožičenje
The EVID 6.2T can be connected in either an 8-ohm low impedance configuration or a 70V/100V constant voltage system. Select the appropriate wiring method based on your ampzasnova vzdrževalnika in sistema.
- 8-Ohm Connection: Connect directly to a low-impedance amplifier output. Ensure the amplifier's impedance rating matches or exceeds the speaker's 8-ohm rating.
- 70V/100V Connection: Utilize the integrated transformer taps. Select the desired wattage tap (e.g., 30W, 60W, 120W) on the speaker to match the power requirements of your constant voltage system. Connect to the 70V or 100V output of your amplifier.
Vedno zagotovite amplifier is turned off before making any connections to prevent damage to the equipment.
Navodila za uporabo
Once properly installed and wired, operating the EVID 6.2T speakers is straightforward.
- Vklop: Vklopite zvok amplifier.
- Izbira vira: Izberite želeni vir zvoka na vašem amplifier ali mešalnik.
- Prilagoditev glasnosti: Postopoma povečajte glasnost na svojem amplifier to the desired listening level. Avoid setting the volume too high, which can cause distortion and potentially damage the speakers. The EVID 6.2T includes overload protection to help prevent damage from excessive power.
- Ugasniti: When finished, decrease the volume and turn off your amplifier.
Vzdrževanje
Redno vzdrževanje pomaga zagotoviti dolgo življenjsko dobo in delovanje vaših zvočnikov.
- Čiščenje: Wipe the speaker enclosure with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but avoid harsh chemicals or abrasive cleaners. Ensure no liquid enters the speaker grilles or ports.
- Pregled povezave: Občasno preverite vse ožičene povezave, da se prepričate, da so varne in brez korozije. Ohlapne povezave lahko povzročijo slabo kakovost zvoka ali občasno delovanje.
- Okoljski vidiki: While weather-resistant, prolonged exposure to extreme conditions (e.g., direct sunlight, heavy rain, snow, extreme temperatures) can affect performance and lifespan. If possible, provide some protection in harsh environments.
Odpravljanje težav
If you encounter issues with your EVID 6.2T speakers, refer to the following common troubleshooting steps:
- Ni zvoka:
- Preverite amplifier je vklopljen in deluje pravilno.
- Preverite vse povezave avdio kablov od vira do amplifier and from the amplifier to the speakers. Ensure they are secure.
- Confirm the correct input source is selected on your amplifier/mešalnik.
- Ensure the volume on the amplifier je obrnjen navzgor.
- Popačen zvok:
- Zmanjšajte glasnost na vašem amppreobremenitev. Preobremenitev zvočnikov lahko povzroči popačenje.
- Preverite ohlapne povezave žic.
- Zagotovite amplifier's output power and impedance match the speaker's requirements (8-ohm or correct 70V/100V tap).
- Prekinjen zvok:
- Preverite vse kabelske povezave glede ohlapnosti ali poškodb.
- Preverite morebitne kratke stike v ožičenju zvočnikov.
If these steps do not resolve the issue, contact Electro-Voice customer support for further assistance.
Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Model | EVID 6.2T |
| Vrsta zvočnika | 2-way Surface-Mount Loudspeaker |
| Velikost nizkotonca | Dvojni 6-palčni |
| Velikost visokotonca | 1-palčni |
| Ravnanje z močjo | 300 vatov |
| Impedanca | 8-ohm (nominal) |
| Transformatorske pipe | 70 V/100 V |
| Ohišje | Odporen na vremenske vplive |
| Zaščita | Zaščita pred preobremenitvijo |
| Zvočnik Ampvrsta lifikacije | Pasivno |
| Vrsta materiala | Stainless Steel (likely for mounting hardware/grille) |
| Dimenzije (D x Š x V) | 21.65 x 18.5 x 15.35 palcev |
| Teža predmeta | 34.3 funtov |
Garancija in podpora
For detailed warranty information, technical support, or service inquiries regarding your Electro-Voice EVID 6.2T loudspeakers, please refer to the official Electro-Voice webspletno mesto ali se obrnite neposredno na njihovo službo za pomoč strankam. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.
