TASCAM DR-100MKII Linear PCM Recorder

Uvod

The TASCAM DR-100MKII is a high-performance linear PCM recorder designed for professional audio recording. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DR-100MKII to ensure optimal performance and longevity.

Ključne značilnosti

• High-resolution 24-bit/96kHz linear PCM (WAV) and MP3 recording.
• Robust aluminum chassis for durability in demanding environments.
• Dual XLR/TRS combo inputs with +4dBu line level and +48V phantom power.
• Independent left/right rotary input gain controls for precise level adjustment.
• Four built-in microphones: two unidirectional and two omnidirectional.
• Dedicated line output separate from headphone output for high-quality audio routing.
• Digital input for lossless connection from external playback devices.
• Mechanical switches for reliable and quick operation.
• Supports SD/SDHC memory cards (2GB SD card included).
• Includes RC-10 wired/wireless remote control.
• Dual battery power system (dedicated Li-ion and AA batteries).

Nastavitev

1. Namestitev baterije

The DR-100MKII supports both a dedicated Li-ion rechargeable battery (BP-L2, included) and two AA dry cell batteries. For extended operation, both can be used simultaneously.

1. Poiščite predal za baterije na zadnji strani enote.
2. Odprite pokrov baterije.
3. Insert the BP-L2 Li-ion battery into its designated slot, ensuring correct polarity.
4. Insert two AA batteries into their respective slots, observing the polarity markings.
5. Varno zaprite pokrov baterije.

Slika 1: Zadaj view of the DR-100MKII, showing the battery compartment and various switches for mic gain, auto/limiter, and speaker.

2. Namestitev kartice SD

The DR-100MKII uses SD or SDHC memory cards for recording. A 2GB SD card is included.

1. Locate the SD card slot on the bottom of the unit.
2. Gently push the SD card into the slot until it clicks into place. Ensure the card is inserted with the correct orientation.
3. Za odstranitev kartico ponovno potisnite navznoter, dokler rahlo ne skoči ven, nato pa jo izvlecite.

Slika 2: Spodaj view of the DR-100MKII, highlighting the SD card slot and the built-in omnidirectional microphones.

3. Priključitev mikrofonov in linijskih vhodov

The DR-100MKII offers versatile input options, including XLR/TRS combo jacks and a dedicated line input.

• XLR/TRS Inputs: Located on the bottom of the unit, these inputs support balanced XLR microphones (with +48V phantom power if needed) or 1/4-inch TRS line-level devices. The locking mechanism ensures secure connections.
• Line 2 Input: A 3.5mm stereo mini-jack input is available on the side for connecting external line-level devices.
• Digitalni vhod: A dedicated digital input terminal allows for lossless connection from compatible digital audio sources.

Slika 3: Bližnji posnetek view of the DR-100MKII's bottom, showing the locking XLR (MIC/LINE 1) inputs for professional audio connections.

Slika 4: stran view of the DR-100MKII, displaying the USB port, DC IN 5V, headphone output, and Line 2 input/output jacks.

4. Connecting Headphones and Line Output

• Izhod za slušalke: Connect your headphones to the 3.5mm headphone jack on the side for monitoring audio.
• Linijski izhod: A dedicated 3.5mm stereo mini-jack line output is available for connecting the DR-100MKII to external mixers, amplifiers, or other audio devices. This output is independent of the headphone output.

5. Vklop/izklop

To power on the unit, slide the power switch located on the side. To power off, slide the switch to the OFF position.

Delovanje

1. Osnovno snemanje

The DR-100MKII can record in WAV (linear PCM) or MP3 formats.

1. Izberite vhodni vir: Use the INPUT switch to select between the built-in microphones (UNI MIC L/R, OMNI MIC L/R) or external inputs (XLR/LINE 1, LINE 2).
2. Prilagodi vhodno raven: Use the large rotary input volume controls (L and R) on the top of the unit to set the recording level. Monitor the level meters on the LCD to avoid clipping.
3. Press RECORD: Pritisnite SNEMANJE button to start recording. The button will illuminate.
4. Ustavi snemanje: Pritisnite STOP gumb za konec snemanja.

Slika 5: Spredaj view of the DR-100MKII, showing the main display, control buttons, and built-in unidirectional microphones.

Slika 6: Zgornji del view of the DR-100MKII, illustrating the large rotary input volume dials for precise left and right channel gain adjustment.

2. Advanced Recording Functions

• Auto Gain Control & Limiter: These functions automatically adjust the recording level to prevent distortion. Enable them via the switches on the back of the unit.
• Pred snemanje: Captures audio from 2 seconds before the RECORD button is pressed.
• Zamik snemanja: Delays recording start slightly to avoid capturing button press noise.
• Low-Cut filter: Reduces unwanted low-frequency noise (e.g., wind, rumble). Settings: OFF/40/80/120Hz.
• Presnemavanje: Allows recording new audio over an existing file, ustvarjanje novega file.

3. Predvajanje

1. Izberite File: Z navigacijskimi gumbi izberite želeni zvok file s seznama.
2. Press PLAY/PAUSE: Pritisnite PREDVAJAJ/PAVZA gumb za začetek predvajanja.
3. Prilagodi glasnost predvajanja: Use the volume controls on the side of the unit.
4. Repeat/Loop: Access these functions through the menu for continuous playback of a file or a specific section.
5. VSA (Variable Speed Audition): Adjust playback speed without changing the pitch, useful for transcription or learning.

4. File Upravljanje

• Mark Function: Add marks at specific points in a recording for easy navigation.
• Track Increment: Automatically or manually split recordings into new files. Auto track increment can be based on file size or input level.
• Divide Function: Split a WAV file into two at a desired point.
• hitro Tag: hitro tag files for identification.

5. Using the Remote Control (RC-10)

The included RC-10 remote control can be used wirelessly (infrared) or wired for precise operation, minimizing handling noise during recording.

• Brezžično delovanje: Point the remote at the DR-100MKII's IR receiver.
• Žično delovanje: Connect the remote to the REMOTE/DIGITAL IN port on the side of the unit using the provided cable.

Slika 7: Pod kotom view of the DR-100MKII, showing the REMOTE/DIGITAL IN port on the side, used for the RC-10 remote control and digital audio input.

Vzdrževanje

1. Čiščenje

Napravo obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil, saj lahko poškodujejo površino.

2. Skrb za baterijo

• Če enote ne boste uporabljali dlje časa, odstranite baterije, da preprečite puščanje.
• Recharge the Li-ion battery regularly to maintain its capacity.

3. SD Card Care

• Always format new SD cards with the DR-100MKII before first use.
• Avoid removing the SD card during recording or playback to prevent data corruption.

Odpravljanje težav

Specifikacije

Garancija in podpora

For warranty information, technical support, and service, please refer to the official TASCAM website or contact your local TASCAM distributor. Keep your purchase receipt as proof of purchase for warranty claims.

Online resources, including updated manuals and software, may be available on the TASCAM support page.