Uvod
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Janome 3128 Sewing Machine. Please read this manual thoroughly before using the machine to ensure proper function and to prevent damage.
Slika 1: The Janome 3128 Sewing Machine, a compact and versatile model designed for various sewing projects.
Nastavitev
1. Razpakiranje in namestitev
- Previdno vzemite stroj iz embalaže.
- Napravo postavite na stabilno, ravno površino z ustrezno osvetlitvijo.
- Ensure there is enough space around the machine for fabric handling.
2. Napajalni priključek
- Napajalni kabel priključite na vhod za napajanje naprave in nato na ustrezno električno vtičnico.
- Vklopite stikalo za vklop, ki se običajno nahaja na strani ali zadnji strani naprave.
3. Navijanje vretenca
- Na zatič za navijanje položite tuljavo niti.
- Za navijanje vretenca napeljite nit skozi napenjalni disk.
- Na vreteno navijalca vretenca namestite prazno vreteno.
- Potisnite vreteno navijala vretenca v desno.
- Press the foot controller gently to wind the thread onto the bobbin. Stop when the bobbin is full.
- Odrežite nit in odstranite navito vreteno.
4. Bobbin Insertion
- Open the bobbin cover plate, typically located on the needle plate area.
- Insert the wound bobbin into the bobbin case, ensuring the thread unwinds in the correct direction (refer to markings on the bobbin case).
- Povlecite nit skozi napenjalno vzmet vretenca.
- Zamenjajte pokrov vretenca.
Slika 2: Od blizu view of the needle plate and bobbin area, showing where the bobbin is inserted and the fabric rests during sewing.
5. Upper Threading
- Dvignite ročico stiskalne noge.
- Na zatič za navijanje položite tuljavo niti.
- Napeljite nit skozi zgornje vodilo niti.
- Follow the numbered threading path down to the tension assembly, around the take-up lever, and down to the needle.
- Iglo napeljite od spredaj nazaj.
- Povlecite nit vretenca skozi luknjo v igelni plošči tako, da obrnete ročno kolo proti sebi, da enkrat spustite in dvignete iglo.
- Povlecite obe niti (zgornjo in vretensko) pod tačko in proti zadnjemu delu stroja.
6. Namestitev igle
- Prepričajte se, da je stroj izklopljen.
- Odvijte iglo clamp vijak.
- Odstranite staro iglo (če je primerno).
- Vstavite novo iglo z ravno stranjo obrnjeno proti zadnji strani stroja in jo potisnite navzgor, kolikor gre.
- Zategnite iglo klamp varno privijte.
7. Presser Foot Attachment
- Dvignite ročico stiskalne noge.
- Align the presser foot with the presser foot holder.
- Lower the presser foot lever to snap the foot into place.
Upravljanje stroja
1. Izbira šiva
The Janome 3128 offers a variety of stitches. To select a stitch, turn the pattern selector dial to the desired letter (A-J) corresponding to the stitch type. The stitch chart on the machine body provides a visual guide.
Slika 3: The stitch selection chart on the machine, displaying various stitch patterns labeled A through J.
2. Nastavitev dolžine in širine šiva
Adjust stitch length and width using the corresponding dials. For most utility stitches, a length of 2.5 is standard. Experiment with different settings on scrap fabric to achieve the desired result for your project.
Slika 4: Close-up of the stitch length and tension adjustment dials, allowing precise control over stitch appearance.
3. Thread Tension Adjustment
Correct thread tension is crucial for balanced stitches. The tension dial typically ranges from 0 to 9. A setting of 3-5 is common for general sewing. If stitches are looping on the top, increase the tension. If looping on the bottom, decrease the tension.
4. Začetek šivanja
- Postavite blago pod tačko.
- Spustite ročico stiskalne noge.
- Turn the handwheel slightly towards you to bring the needle down into the fabric.
- Gently press the foot controller to begin sewing. Guide the fabric smoothly without pulling or pushing.
5. Reverse Stitching
To secure the beginning and end of a seam, use the reverse stitch lever or button. Hold it down to sew backward a few stitches, then release to continue sewing forward.
Vzdrževanje
Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vašega šivalnega stroja.
1. Čiščenje
- Odstranjevanje vlaken: Regularly remove the needle plate and bobbin case to clean out lint and thread scraps using a small brush. Accumulated lint can affect stitch quality and machine operation.
- Čiščenje zunanjosti: Zunanjost naprave obrišite z mehko, suho krpo. Izogibajte se uporabi agresivnih kemikalij.
2. Zamenjava igle
Replace the needle frequently, especially after 8-10 hours of sewing or if it becomes bent or dull. A dull needle can cause skipped stitches, fabric damage, or needle breakage.
3. Bobbin Case Cleaning
Periodically remove the bobbin case and clean any lint or debris from the area. This helps prevent thread jams and ensures smooth bobbin thread delivery.
Odpravljanje težav
Za pogoste težave in njihove rešitve glejte naslednjo tabelo.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Niti se zlomi | Incorrect threading, tension too high, dull needle, wrong needle size. | Re-thread machine, adjust tension, replace needle, use correct needle for fabric. |
| Preskočeni šivi | Bent or dull needle, incorrect needle insertion, wrong needle type. | Replace needle, ensure needle is fully inserted with flat side to the back, use appropriate needle. |
| Neenakomerni šivi / Zankanje | Incorrect thread tension, improper bobbin winding or insertion. | Adjust tension dial, re-wind and re-insert bobbin correctly. |
| Machine jams | Thread tangled in bobbin area, lint accumulation. | Turn off machine, remove needle plate and bobbin, clear all tangled threads and lint. |
Specifikacije
- Znamka: Janome
- Model: 3128
- Dimenzije izdelka: 9 x 15 x 12 palcev
- Teža artikla: 12 funtov
- Proizvajalec: Janome
- UPC: 732212231032
- Potrebne baterije: št
Garancija in podpora
For warranty information, service, or technical support, please refer to the warranty card included with your purchase or visit the official Janome website. Contacting Janome directly will provide the most accurate and up-to-date support information.
Več informacij in kontaktnih podatkov najdete na Trgovina Janome na Amazonu.
