Uvod
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your OSRAM Sylvania QHE3x32T8/UNV-PSN-SC Fluorescent Lamp Ballast. Please read this manual thoroughly before installation and retain it for future reference. This ballast is designed for use with 3-lamp, 32W T8 fluorescent lamps and operates on 120-277V, 50/60Hz electrical systems.
Pomembna varnostna navodila
OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izključite napajanje.
- Installation must be performed by a qualified electrician in accordance with the National Electrical Code and local codes and ordinances.
- Zagotovite dovodni voltage is compatible with the ballast's operating voltage (120-277 V).
- Do not install damaged products. Inspect the ballast for damage before installation.
- Med namestitvijo kompleta ne delajte ali spreminjajte odprtih lukenj v ohišju napeljave ali električnih komponent.
- Da preprečite poškodbe ali odrgnine napeljave, je ne izpostavljajte robom pločevine ali drugim ostrim predmetom.
- This ballast is designed for indoor use in dry locations unless otherwise specified.
- Ground the ballast case properly to prevent electrical hazards.
Konec izdelkaview
The OSRAM Sylvania QHE3x32T8/UNV-PSN-SC is a high-efficiency, programmed rapid start electronic ballast designed for optimal performance with T8 fluorescent lamps. It features universal voltage input and lamp striation control for consistent light output.
Ključne značilnosti:
- Programmed Rapid Start T8 Electronic Ballast
- Univerzalna letntage: 120-277 V, 50/60 Hz
- High-Efficiency - Type CC
- Visok faktor moči
- Lamp Nadzor strij
- Ocena zvoka A
- Inherent Thermal Protection
- UL Listed Class P, Type 1 Outdoor, Type CC
- Complies with FCC 47 CFR Part 18, Non-Consumer
- No PCBs
Slika 1: Zgoraj view of the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast, showing product labeling and specifications.
Namestitev in ožičenje
Before beginning installation, ensure all power to the fixture is disconnected at the circuit breaker. Follow the wiring diagram carefully for proper and safe connection.
Shema ožičenja:
Image 2: Detailed wiring diagram for the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast, illustrating connections for input power and lamp izhodi.
Navodila za ožičenje:
- Vhodna moč: Connect the black wire to the LINE (L) input and the white wire to the NEUTRAL (N) input. Ensure the ground wire is securely connected to the ballast case and fixture ground.
- Lamp Povezave:
- Connect the blue/white wires to the first lamp.
- Connect the blue wires to the second lamp.
- Connect the red wires to the third lamp.
- Connect the yellow wires to the common lamp terminals as indicated in the diagram.
- Montaža: Securely mount the ballast within the fixture using appropriate fasteners. Ensure adequate ventilation around the ballast.
- voltage Združljivost: This ballast is designed for universal voltage operation (120V or 277V). Verify your supply voltage vžigalice.
Lamp Združljivost:
This ballast is compatible with the following T8 fluorescent lamp konfiguracije:
| Lamp Vrste | Line Current (120V) | Line Current (277V) | Min. Start Temp |
|---|---|---|---|
| 3 x FO32T8 | 0.69A | 0.29A | -20°F/-29°C |
| 3 x FO25T8 | 0.53A | 0.23A | -20°F/-29°C |
| 3 x FO17T8 | 0.36A | 0.16A | -20°F/-29°C |
| 2 x FO40T8 | 0.63A | 0.27A | 0°F/-18°C |
| 2 x FO32T8 | 0.51A | 0.23A | -20°F/-29°C |
Also suitable for "U" bend and SS equivalents.
Navodila za uporabo
Once properly installed and wired, the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast operates automatically. Upon applying power, the ballast will initiate the programmed rapid start sequence to ignite the connected fluorescent lamps. This ensures quick and reliable lamp ignition and extends lamp življenje.
- Zagotovite vse lamps are correctly seated in their sockets before applying power.
- The ballast is designed for continuous operation within its specified temperature and voltage razponi.
- No user adjustments are required for normal operation.
Vzdrževanje
The OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast is designed for long-term, maintenance-free operation. However, periodic inspection of the lighting fixture and its components is recommended.
- Odklop napajanja: Always disconnect power at the circuit breaker before performing any inspection or maintenance.
- Čiščenje: Keep the ballast and fixture free from dust and debris to ensure proper heat dissipation. Use a dry, lint-free cloth for cleaning.
- Pregled ožičenja: Občasno preverjajte tesnost priključkov in morebitne znake obrabe ali poškodb.
- Lamp Zamenjava: Zamenjajte lampz združljivimi fluorescentnimi sijalkami T8amps as specified in the "Lamp Compatibility" section. Ensure power is off during lamp zamenjava.
- Ballast Replacement: If the ballast fails, replace it with an identical OSRAM Sylvania QHE3x32T8/UNV-PSN-SC model or an approved equivalent.
Odpravljanje težav
If your lighting fixture is not operating correctly, consult the following troubleshooting guide. Always disconnect power before attempting any inspection or repair.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Lamps ne sveti | Brez napajanja na napeljavo Nepravilno ožičenje Napaka lamps Pokvarjen balast | Preverite odklopnik in stensko stikalo. Verify wiring against the diagram. Zamenjajte lamps with known good ones. Replace ballast if lamps are good and wiring is correct. |
| Lamps flicker or are dim | Ohlapno lamp povezave Napačno lamp vrsta Nizka vhodna voltage Staranje lamps | Zagotovite lamps are securely seated. Preverite lamps are compatible T8 types. Preverite količino dobavetage. Zamenjajte lamps. |
| Ballast hums excessively | Ohlapna montaža Nepravilna voltage Internal ballast issue | Privijte pritrdilne vijake. Preverite vnos voltage. Replace ballast if hum persists and is excessive. |
Tehnične specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številka modela | QHE3x32T8/UNV-PSN-SC |
| Številka dela | 51413 |
| Znamka | OSRAM (Manufacturer: Sylvania) |
| Vhodna voltage | 120-277V AC |
| Pogostost | 50/60Hz |
| Lamp Vrsta | T8 Fluorescent (e.g., F32T8, FO32T8, F25T8, F17T8, F40T8) |
| Število Lamps | 3 (or 2 for F40T8/F32T8) |
| Wattage (per lamp) | 32W (for F32T8) |
| Metoda zagona | Programirani hitri zagon |
| Učinkovitost | High-Efficiency - Type CC |
| Faktor moči | Visok faktor moči |
| Teža predmeta | 1.32 funta (približno 0.6 kg) |
| Mere izdelka (D x Š x V) | 9.5 x 1.68 x 1.18 palca (približno 24.1 x 4.3 x 3.0 cm) |
| Min. Start Temperature | -20°F (-29°C) for most T8 lamps; 0°F (-18°C) for 2xFO40T8 |
| Certifikati | UL Listed, Type CC, FCC 47 CFR Part 18, RoHS compliant |
Informacije o garanciji
OSRAM products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to the QUICKTRONIC® QHE3x32T8/UNV-PSN-SC ballast, please refer to the official OSRAM/Sylvania warranty documentation provided with your purchase or visit the OSRAM website. Typically, electronic ballasts come with a limited warranty covering defects in materials and workmanship under normal use.
Note: The "QUICK60+" System Warranty mentioned on the product label refers to a system warranty when used with specific OSRAM lamps. Consult OSRAM for details.
Podpora uporabnikom
For technical assistance, product inquiries, or support, please contact OSRAM/Sylvania customer service.
Technical Assistance Hotline: 1-800-LIGHTBULB (as indicated on product label)
You may also visit the official OSRAM webspletno mesto za dodatne vire in možnosti stika.
