Uporabniški priročnik za Showtec LED Par 64 Short Q4-18 Black

1. Uvod

This manual provides essential information for the safe and efficient operation of your Showtec LED Par 64 Short Q4-18 Black. This LED PAR floor spot is designed for professional lighting applications, offering versatile illumination for various events and venues. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury.

2. Varnostne informacije

Always observe the following safety precautions to reduce the risk of electric shock, fire, or personal injury:

• Ensure the device is connected to a grounded power outlet with the correct voltage (2.4E+2 Volts AC).
• Naprave ne izpostavljajte dežju ali vlagi.
• Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Zagotovite zadostno prezračevanje okoli enote, da preprečite pregrevanje.
• Izogibajte se neposredni izpostavljenosti oči viru svetlobe.
• Pred čiščenjem ali kakršnim koli vzdrževanjem vedno izključite napajanje.
• Z napravo ravnajte previdno. Pazite, da vam ne pade ali da je ne izpostavljate močnim udarcem.

3. Izdelek je končanview

The Showtec LED Par 64 Short Q4-18 is a robust lighting fixture designed for durability and performance. Below are key viewizdelka:

Slika 3.1: Spredaj view of the Showtec LED Par 64 Short Q4-18 Black, showing the LED array and the sturdy black aluminum housing with its adjustable yoke.

Figure 3.2: The LED Par 64 with its powerful LEDs illuminated, demonstrating its light output capability.

Figure 3.3: Rear panel of the unit, featuring the digital display, control buttons (Mode, Setup, Up, Down), DMX In/Out ports, and the fuse holder (1A/250V).

4. Nastavitev

Follow these steps to set up your LED Par 64 Short Q4-18:

1. Montaža: Securely mount the fixture using the integrated yoke. Ensure it is stable and can support the weight of the unit (4.05 kg).
2. Napajalni priključek: Connect the power cable to a suitable grounded AC power outlet (2.4E+2 Volts AC).
3. DMX povezava (neobvezno): For DMX control, connect a DMX cable from your DMX controller to the DMX In port on the rear panel. If linking multiple units, connect from the DMX Out of the first unit to the DMX In of the next.
4. Začetni vklop: Once connected, the unit will power on and the display on the rear panel will illuminate.

5. Delovanje

The LED Par 64 Short Q4-18 can be operated in various modes, including standalone and DMX control.

5.1 Konec nadzorne ploščeview

The rear control panel (refer to Figure 3.3) features a digital display and four buttons:

• način: Cycles through different operating modes (e.g., DMX, Auto, Sound Active).
• Nastavitev: Enters/confirms settings within a selected mode.
• gor: Pomika navzgor po možnostih menija ali povečuje vrednosti parametrov.
• Dol: Pomika navzdol po možnostih menija ali zmanjšuje vrednosti parametrov.

5.2 DMX upravljanje

To control the fixture via DMX, set the DMX address using the control panel. Consult the specific DMX channel chart (usually provided in a separate DMX manual or appendix) for detailed control parameters such as dimmer, color mixing, and strobe effects.

5.3 Standalone Modes

Use the 'Mode' button to select standalone programs. These may include:

• Avtomatski programi: Predprogramirane svetlobne predstave, ki se izvajajo samodejno.
• Zvočno aktivno: The light reacts to ambient sound via a built-in microphone.
• Statična barva: Select and display a single static color.

Use the 'Up' and 'Down' buttons to adjust parameters within these modes (e.g., program speed, sound sensitivity, color intensity).

6. Vzdrževanje

Regular maintenance ensures the longevity and optimal performance of your LED Par 64 Short Q4-18.

• Čiščenje: Disconnect power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp Uporabite lahko krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Čiščenje leč: Gently clean the LED lenses with a soft cloth and a mild glass cleaner if necessary.
• Zamenjava varovalke: If the unit does not power on, check the fuse located on the rear panel (refer to Figure 3.3). Replace with a fuse of the same type and rating (1A/250V).
• Pregled: Periodically inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.

7. Odpravljanje težav

Ta razdelek obravnava pogoste težave, na katere lahko naletite.

If the problem persists after attempting these solutions, please contact Showtec customer support.

8. Specifikacije

9. Garancija in podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Showtec webspletnega mesta. Shranite dokazilo o nakupu za morebitne garancijske zahtevke.

Proizvajalec: Showtec

Webspletno mesto: www.highlite.com/en/brands/showtec