Alecto BW70 Grelnik stekleničk za dojenčke - Uporabniški priročnik

Uvod

Thank you for choosing the Alecto BW70 Baby Bottle Warmer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.

Pomembna varnostna navodila

Da bi zmanjšali tveganje požara, električnega udara ali poškodb, vedno upoštevajte te osnovne varnostne ukrepe:

• Pred uporabo aparata preberite vsa navodila.
• Ne dotikajte se vročih površin. Uporabite ročaje ali gumbe.
• Za zaščito pred električnim udarom ne potapljajte kabla, vtičev ali naprave v vodo ali drugo tekočino.
• Potreben je natančen nadzor, kadar katero koli napravo uporabljajo otroci ali v njeni bližini.
• Izvlecite vtič iz vtičnice, ko ga ne uporabljate in pred čiščenjem. Pustite, da se ohladi, preden namestite ali odstranite dele in preden očistite aparat.
• Ne uporabljajte nobene naprave s poškodovanim kablom ali vtičem ali po tem, ko naprava ne deluje pravilno ali je bila kakor koli poškodovana.
• The use of accessory attachments not recommended by the appliance manufacturer may result in injuries.
• Ne uporabljajte na prostem.
• Kabel ne sme viseti čez rob mize ali pulta ali se dotikati vročih površin.
• Ne postavljajte na ali blizu vročega plinskega ali električnega gorilnika ali v segreto pečico.
• Vedno najprej priključite vtič na napravo, nato pa priključite kabel v stensko vtičnico. Za izklop izklopite kateri koli gumb in nato izvlecite vtič iz stenske vtičnice.
• Naprave ne uporabljajte za namene, ki niso predvideni.
• Pri premikanju naprave, ki vsebuje vroče olje ali druge vroče tekočine, morate biti zelo previdni.

Konec izdelkaview

The Alecto BW70 is designed to safely and efficiently warm baby bottles and food jars. Its compact design and easy-to-use controls make it an ideal choice for parents.

Figure 1: Alecto BW70 Baby Bottle Warmer with a bottle inserted, showing the control dial and LED indicator.

Figure 2: The Alecto BW70 Baby Bottle Warmer shown with its removable basket, which helps in safely placing and removing bottles or jars.

Sestavine:

• Main Heating Unit
• Temperature Control Dial (with OFF, 25°C, 70°C, 100°C markings)
• LED indikatorska lučka
• Removable Basket/Holder
• Napajalni kabel

Nastavitev

1. Razpakiraj: Carefully remove the bottle warmer and all its components from the packaging.
2. Začetno čiščenje: Pred prvo uporabo obrišite zunanjost enote zamp cloth. Wash the removable basket with warm soapy water, rinse thoroughly, and dry. Do not immerse the main unit in water.
3. Umestitev: Place the bottle warmer on a stable, flat, heat-resistant surface, away from direct sunlight or heat sources. Ensure there is adequate ventilation around the unit.
4. Dodajte vodo: Pour clean tap water into the water reservoir of the warmer. The water level should be just below the rim of the warmer, or as indicated by a maximum fill line if present. Ensure the water level is sufficient to cover the contents of the bottle or jar you intend to warm.
5. Priključite napajanje: Priključite napajalni kabel v ustrezno električno vtičnico.

Navodila za uporabo

Warming Baby Bottles (Milk):

1. Ensure the water reservoir is filled to the appropriate level.
2. Place the baby bottle (with cap removed) into the removable basket.
3. Carefully lower the basket with the bottle into the warmer.
4. Turn the temperature control dial to the desired setting. For milk, a setting around 25°C to 37°C (body temperature) is usually ideal. The dial allows for continuous adjustment.
5. The LED indicator light will illuminate, indicating that the warmer is heating.
6. Once the desired temperature is reached, the LED light will turn off.
7. Carefully remove the bottle using the basket handle. Always test the milk temperature on the back of your hand before feeding to ensure it is not too hot.
8. Turn the dial to "OFF" after use and unplug the unit.

Warming Baby Food Jars:

1. Prepričajte se, da je rezervoar za vodo napolnjen.
2. Place the baby food jar (with lid removed) into the removable basket.
3. Carefully lower the basket with the jar into the warmer.
4. Turn the temperature control dial to a higher setting, such as 70°C, for warming food. Adjust as needed.
5. The LED indicator light will illuminate during heating.
6. Once the desired temperature is reached, the LED light will turn off.
7. Carefully remove the jar using the basket handle. Stir the food and test the temperature before feeding.
8. Turn the dial to "OFF" after use and unplug the unit.

Vzdrževanje in čiščenje

Dnevno čiščenje:

• Always unplug the warmer and allow it to cool completely before cleaning.
• Iz rezervoarja izpraznite preostalo vodo.
• Wipe the interior and exterior of the warmer with a damp krpo. Ne uporabljajte abrazivnih čistil ali gob.
• Wash the removable basket with warm soapy water, rinse, and dry.

Odstranjevanje vodnega kamna:

Over time, mineral deposits (limescale) may build up in the heating element, especially in areas with hard water. Descale the unit regularly (e.g., monthly or bi-monthly) to ensure optimal performance.

1. Zmešajte 50 ml belega kisa s 100 ml hladne vode.
2. Pour the solution into the water reservoir of the warmer.
3. Turn the dial to the 100°C setting and let it run until the LED light turns off.
4. Unplug the unit and let the solution sit for 30 minutes.
5. Pour out the solution and rinse the reservoir thoroughly with clean water several times to remove any vinegar residue.
6. Obrišite do suhega.

Shranjevanje:

When not in use, store the bottle warmer in a clean, dry place, out of reach of children.

Odpravljanje težav

Specifikacije

Garancija in podpora

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Alecto webspletnega mesta. Shranite dokazilo o nakupu za morebitne garancijske zahtevke.

For further assistance, you may contact Alecto customer service through their official channels.