1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of the Eaton Accell AIM06-A-K Smart Dimmer. This device is designed for smooth, full-range digital dimming of incandescent, magnetic low-voltage, and fluorescent lighting. Please read these instructions carefully before installation and use.
Image 1.1: Eaton Accell AIM06-A-K Smart Dimmer in Almond. This image shows the front view of the dimmer switch, highlighting its push pad and dim/bright bar.
2. Varnostne informacije
OPOZORILO: Da bi se izognili požaru, električnemu udaru ali smrti, izklopite napajanje na odklopniku ali v omarici z varovalkami in pred ožičenjem preverite, ali je napajanje izklopljeno.
- Namestitev mora opraviti usposobljen električar v skladu z vsemi lokalnimi in nacionalnimi električnimi predpisi.
- Do not use with loads exceeding 600 Watts for incandescent/halogen or magnetic low-voltage osvetlitev.
- Zagotovite, da so vse žične povezave varne.
- Ta naprava je samo za uporabo v zaprtih prostorih.
- Do not attempt to repair or modify the device. Refer servicing to qualified personnel.
3. Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- Eaton Accell AIM06-A-K Smart Dimmer (Almond)
- Wire Nuts (typically included for connections)
- Navodila za uporabo (ta dokument)
4. Ključne značilnosti
- Single-pole and multi-location smart dimmer functionality.
- Smooth, full-range digital dimming for incandescent, magnetic low-voltage, and fluorescent lighting.
- Electro-mechanical push pad for ON/OFF operation with a separate dim/bright bar.
- Preset feature allows return to the previous light setting.
- LED light level display for presetting illumination levels.
- Amber LED at the bottom indicates ON/OFF load status.
- Seven-step green LED display indicates selected light level and reduces brightness when off (night light feature).
- Digital circuitry provides soft-on/fade-off, extending lamp življenje.
- Neutral wire is not required for installation.
- Compatible with any decorator designer-style wallplates.
5. Namestitev
- Izklopite napajanje: At the circuit breaker or fuse box, turn off the power to the switch location. Verify power is off using a voltage tester.
- Odstranite staro stikalo: Carefully remove the existing wallplate and switch from the wall box. Disconnect the wires from the old switch.
- Prepoznajte žice:
- Linijska žica: Žica, ki dovaja napajanje iz odklopnika.
- Žica za obremenitev: Žica, ki gre do svetilke.
- Ozemljitvena žica: Gola bakrena ali zeleno izolirana žica.
- Traveler Wires (for multi-location): If replacing a 3-way or 4-way switch, identify the traveler wires.
- Priključitev zatemnilnika: Connect the wires to the dimmer according to the wiring diagram provided with the product.
- Connect the Line wire to the dimmer's Line terminal.
- Connect the Load wire to the dimmer's Load terminal.
- Connect the Ground wire to the dimmer's Ground terminal.
- For multi-location installations, connect traveler wires as per the specific diagram for your setup.
Opomba: The AIM06-A-K dimmer does not require a neutral wire for installation.
- Namestite zatemnilnik: Žice previdno prepognite v stensko omarico in nanjo pritrdite zatemnilnik s priloženimi vijaki.
- Namestitev stenske plošče: Attach a decorator-style wallplate (sold separately) over the dimmer.
- Obnovi moč: Ponovno vklopite napajanje na odklopniku.
- Testno delovanje: Test the dimmer's ON/OFF function and dimming capabilities.
6. Delovanje
- VKLOP/IZKLOP: Press the large electro-mechanical push pad to turn the lights ON or OFF.
- Dimming/Brightening: Use the separate dim/bright bar located next to the push pad. Press the top of the bar to brighten lights, and the bottom to dim lights.
- Preset Feature: When turning the lights ON, the dimmer will return to the last set brightness level.
- LED Light Level Display: The seven-step green LED display indicates the current light level. When the lights are off, these LEDs reduce brightness, acting as a night light.
- Load Status Indicator: An amber LED at the bottom of the LED display indicates the ON/OFF status of the load.
7. Vzdrževanje
- Čiščenje: Za čiščenje zatemnilnika ga obrišite z mehko,amp krpo. Ne uporabljajte abrazivnih čistil ali topil.
- Brez delov, ki bi jih lahko servisiral uporabnik: The dimmer contains no user-serviceable parts. Do not attempt to open or repair the unit.
8. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luči se ne prižgejo. |
|
|
| Lights do not dim. |
|
|
| Dimmer is hot to the touch. |
|
|
9. Specifikacije
- Model: AIM06-A-K
- Znamka: Eaton
- Tip: Smart Dimmer, Incandescent/Halogen, Magnetic Low-Voltage
- Wattage: 600 W (največ)
- voltage: 120 V AC, 60 Hz
- Način delovanja: Push Button with Dim/Bright Bar
- barva: Mandelj
- Dimenzije (D x Š x V): Approximately 2.27 x 2.27 x 2.27 inches (actual faceplate size may vary)
- Certifikati: cULus Listed to UL1472, NOM certified
- Protokol povezljivosti: X-10
- Nevtralna žica: Not required for installation
10. Garancija in podpora
For warranty information and technical support, please refer to the official Eaton website or contact Eaton customer service directly. Specific warranty terms may vary by region and purchase date.
