Weiser SmartCode 5 Electronic Deadbolt (9GED14900-001) User Manual

Uvod

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Weiser SmartCode 5 Electronic Deadbolt. The SmartCode 5 deadbolt offers keyless entry convenience with a keypad and enhanced security features, including SmartKey re-key technology. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lock.

Image: The Weiser SmartCode 5 Electronic Deadbolt in Polished Brass finish, featuring a keypad and traditional keyhole.

Lastnosti izdelka

• Vstop brez ključa: Operate the deadbolt using a personalized code on the electronic keypad.
• SmartKey Re-key Technology: Re-key the lock yourself in seconds in three easy steps, allowing you to match your existing keys.
• Traditional Keyed Entry: Includes a standard keyhole for manual operation.
• Interior Turn Button: Lock or unlock the deadbolt from the inside with a simple turn.
• Izboljšana varnost: Designed for exterior doors where robust security is essential.
• Vzdržljiva konstrukcija: Features a 1-inch deadbolt throw for added security.

Image: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.

Nastavitev in namestitev

Proper installation is crucial for the optimal performance and security of your SmartCode 5 deadbolt. It is recommended to follow the detailed instructions provided in the separate installation guide included with your product. Ensure your door preparation meets the specified dimensions before beginning installation.

Ključni koraki namestitve:

1. Pripravite vrata in okvir v skladu s priloženo predlogo.
2. Namestite zapah in zaporno ploščo.
3. Namestite sklop zunanje tipkovnice.
4. Namestite notranji sklop in pri tem zagotovite pravilno kabelsko povezavo.
5. Insert 4 AA batteries (not included) into the battery pack.
6. Izvedite postopek odpiranja vrat, da kalibrirate ključavnico.

SmartKey Re-keying Instructions:

The SmartKey feature allows you to re-key your lock to an existing key. This process takes seconds and requires your functioning key and the SmartKey tool.

1. Insert the currently programmed key fully into the keyhole and turn it 90 degrees clockwise to the horizontal position.
2. Insert the SmartKey tool firmly and fully into the SmartKey hole. Remove the SmartKey tool.
3. Remove the currently programmed key.
4. Insert the new key you wish to use fully into the keyhole and turn it 90 degrees counter-clockwise to the vertical position.
5. Remove the new key. The lock is now re-keyed. Test with the new key to ensure proper operation.

Image: The Weiser SmartCode 5 Electronic Deadbolt installed on a dark wooden door, showcasing its appearance in a home setting.

Navodila za uporabo

Zaklepanje vrat:

• From Outside (Keypad): Press the 'Lock' button (the padlock icon) on the keypad.
• From Outside (Key): Insert your key and turn it to lock the deadbolt.
• Od znotraj: Turn the thumb turn on the interior assembly to the locked position.

Odklepanje vrat:

• From Outside (Keypad): Enter your 4-8 digit user code. The deadbolt will retract.
• From Outside (Key): Insert your key and turn it to unlock the deadbolt.
• Od znotraj: Turn the thumb turn on the interior assembly to the unlocked position.

Programiranje uporabniških kod:

The lock comes with a default programming code and two default user codes. It is highly recommended to change these immediately after installation.

1. Odprite pokrov baterije na notranjem sklopu.
2. Press the 'Program' button once.
3. Enter the 4-digit Programming Code (default is 0-0-0-0).
4. Press the 'Lock' button.
5. Vnesite novo 4–8-mestno uporabniško kodo.
6. Press the 'Lock' button.
7. Test the new user code to ensure it unlocks the door.

Refer to the full programming guide for instructions on deleting codes, enabling/disabling auto-lock, and other advanced features.

Vzdrževanje

Zamenjava baterije:

The SmartCode 5 deadbolt requires 4 AA batteries. When the batteries are low, the lock will emit a series of beeps and/or flash a red light during operation. Replace all four batteries simultaneously with new, high-quality alkaline AA batteries.

1. Odstranite pokrov baterije z notranjega sklopa.
2. Odstranite stare baterije.
3. Insert four new AA alkaline batteries, observing correct polarity (+/-).
4. Zamenjajte pokrov baterije.

Čiščenje:

Za čiščenje ključavnice uporabite mehko, damp krpo. Izogibajte se abrazivnim čistilom, topilom ali kemičnim razpršilom, saj lahko poškodujejo površino in elektronske komponente.

Odpravljanje težav

If you encounter issues with your Weiser SmartCode 5 Electronic Deadbolt, refer to the following common solutions:

• Ključavnica se ne odziva: Check battery levels and replace if necessary. Ensure the cable connection between the exterior and interior assemblies is secure.
• Tipkovnica se ne prižge: This usually indicates dead batteries. Replace all four AA batteries.
• Zapah se ne izvleče/uvleče v celoti: Ensure the door frame strike plate is properly aligned and the door is not warped. Perform the door handing process again.
• User code not working: Verify the code is entered correctly. Try reprogramming the user code. Ensure the programming code has not been changed or forgotten.
• SmartKey re-keying issue: Ensure the original key is fully inserted and turned 90 degrees. The SmartKey tool must be inserted firmly and fully.

For more complex issues or if the problem persists, contact Weiser customer support or consult the full troubleshooting guide available on the Weiser webmesto.

Specifikacije

Garancija in podpora

Weiser products are backed by a limited lifetime mechanical and finish warranty, and a 1-year limited electronics warranty. For specific warranty details, claims, or technical support, please visit the official Weiser webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Za namene garancije shranite dokazilo o nakupu.

Weiser Customer Support: Refer to your product packaging or the official Weiser webspletno mesto za trenutne kontaktne podatke.