Uvod
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the Testo 400563 4354 IAQ Kit. This device is designed for simple and intuitive operation for reading, saving, and analyzing ventilation and indoor air quality parameters, including Relative Humidity (RH), Temperature, Carbon Dioxide (CO2), and Barometric Pressure.
Varnostne informacije
Please read this section carefully before operating the device. Failure to comply with these instructions may result in injury or damage to the instrument.
- Always operate the device within its specified operating temperature and humidity ranges.
- Do not expose the device to extreme temperatures, direct sunlight, or corrosive environments.
- Izogibajte se padcem ali izpostavljanju naprave močnim udarcem.
- Only use specified batteries and dispose of them properly.
- Naprave ne poskušajte odpirati ali popravljati sami. Vsa servisna dela prepustite usposobljenemu osebju.
- Napravo vzdržujte čisto in brez prahu in umazanije.
Konec izdelkaview
The Testo 400563 4354 IAQ Kit is a versatile instrument for environmental measurements. Familiarize yourself with its components:
Slika 1: Testo 435-4 IAQ Meter. This image displays the handheld meter, featuring a large digital display at the top showing readings like "1037 ppm" and "934.4 m³/h". Below the screen are several control buttons: three orange circular buttons at the top, followed by two grey arrow buttons (up and down), another grey circular button, and finally a power button with a power symbol. The device has a sleek, ergonomic design with a black body and silver-colored accents.
Ključne komponente:
- Zaslon: Large LCD for clear reading of measurement values and menu navigation.
- Gumbi za upravljanje: Intuitive buttons for power, navigation, selection, and function activation.
- Vhod senzorja: Port for connecting various probes (e.g., CO2, humidity, temperature).
- Predal za baterije: Located at the rear for power supply.
Nastavitev
1. Namestitev baterije:
- Poiščite pokrov predalčka za baterije na zadnji strani naprave.
- Open the cover by sliding or unscrewing it (refer to specific model instructions if screws are present).
- Insert the required batteries (e.g., AA or AAA, typically 3 or 4) ensuring correct polarity (+/-).
- Trdno zaprite pokrov prostora za baterije.
2. Priključek sonde:
- Connect the desired measurement probe (e.g., CO2 probe, humidity/temperature probe) to the designated input port on the device.
- Ensure the connection is firm and secure to prevent inaccurate readings.
Navodila za uporabo
1. Vklop/izklop:
- Za vklop pritisnite in držite Moč button (usually marked with Ⓢ), dokler se zaslon ne prižge.
- Za izklop pritisnite in držite tipko Moč gumb držite, dokler se zaslon ne izklopi.
2. Izvajanje meritev:
- Once powered on and a probe is connected, the device will typically display real-time measurements for the connected parameters (e.g., CO2 in ppm, Temperature in °C/°F, RH in %).
- Position the probe in the environment you wish to measure. Ensure proper air circulation around the sensor for accurate readings.
- Allow a few moments for readings to stabilize, especially for CO2 and humidity.
3. Navigating Menus and Saving Data:
- Uporabite Gor/Dol arrow buttons to navigate through different measurement modes or menu options.
- Pritisnite Vnesite/V redu button (often a central circular button) to select an option or confirm a setting.
- To save a measurement, look for a Shrani or Spomin button/option. Follow the on-screen prompts to store data.
- To recall saved data, navigate to the Spomin or Odpoklic možnost menija.
Vzdrževanje
1. Čiščenje:
- Obrišite napravo casing z mehkim, damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
- Ensure no liquid enters the sensor openings or electrical connections.
- For probes, follow specific cleaning instructions provided with the probe itself.
2. Zamenjava baterije:
- Baterije zamenjajte, ko se na zaslonu prikaže indikator nizke napolnjenosti baterij.
- Always use new batteries of the specified type.
- Stare baterije zavrzite v skladu z lokalnimi predpisi.
3. Kalibracija:
- Regular calibration is essential for maintaining measurement accuracy.
- Refer to the device's on-screen calibration menu or consult Testo's official support for recommended calibration intervals and procedures.
- Some probes may require specific calibration gases or humidity standards.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Naprava se ne vklopi. | Prazne ali nepravilno vstavljene baterije. | Preverite polarnost baterij; zamenjajte z novimi baterijami. |
| Netočni odčitki. | Sensor dirty, damaged, or out of calibration; improper probe connection. | Clean sensor; ensure probe is securely connected; perform calibration. |
| Display shows "Error" or "---". | Sensor malfunction; out of measurement range; internal error. | Check probe connection; move to an environment within measurement range; restart device; contact support if persistent. |
| Cannot save data. | Memory full; incorrect save procedure. | Delete old data; refer to operating instructions for saving data. |
Specifikacije
The following specifications are for the Testo 400563 4354 IAQ Kit:
- Vrsta izdelka: CO2/Temp/RH/Barometric Meter
- Model: 400563 4354
- Znamka: Testo
- Številka dela: AO-10382-23
- Količina paketa: VSAK
- Dimenzije paketa: 16.3 x 13 x 4.3 palca; 8.2 funtov
- ASIN: B00481RUUA
- Prvi na voljo: 18. julij 2012
Note: Specific measurement ranges and accuracies depend on the probes used with the device. Refer to individual probe documentation for detailed specifications.
Garancija in podpora
For warranty information, technical support, or service inquiries, please contact Testo customer service or visit their official webmesto.
Več informacij in kontaktnih podatkov najdete na Trgovina Testo na Amazonu.
