Uvod
The Strymon El Capistan dTape Echo pedal is designed to emulate the natural warmth and unique sonic characteristics of classic tape delay units. Utilizing advanced SHARC DSP technology, it offers three distinct tape machine styles and a wide range of adjustable parameters, along with bonus features like onboard spring reverb and a sound-on-sound looper. This manual provides detailed instructions for setting up and operating your El Capistan pedal.
Ključne značilnosti
- Five tape adjustment and tone shaping knobs: Time, Mix, Tape Age, Repeats, Wow & Flutter.
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters.
- 115dB typical signal to noise ratio.
- Super high performance DSP in a compact form factor.
- True Bypass (electromechanical relay switching).
Nastavitev
To set up your Strymon El Capistan pedal, follow these steps:
- Napajalni priključek: Connect a 9V DC power supply (center-negative, 100mA minimum) to the 9VDC input jack on the rear of the pedal. Ensure the power supply meets the specified requirements to prevent damage.
- Vhodna povezava: Connect your instrument (e.g., guitar) to the INPUT jack on the rear of the pedal using a standard 1/4-inch instrument cable.
- Izhodna povezava: Connect the LEFT OUT and/or RIGHT OUT jacks to your amplifier or audio interface using 1/4-inch instrument cables. For mono operation, use the LEFT OUT jack. For stereo operation, use both LEFT OUT and RIGHT OUT.
- Ekspresijski pedal (neobvezno): An optional expression pedal can be connected to the EXP jack for real-time control over various parameters.
Navodila za uporabo
The El Capistan offers a comprehensive set of controls to shape your tape echo sound. Familiarize yourself with the primary and secondary functions of each control.
Primarne kontrole
- ČAS: Controls the delay time of the echo repeats.
- MIX: Adjusts the wet/dry ratio of the effect. Turn clockwise for more effect, counter-clockwise for less.
- TAPE AGE: Controls the bandwidth of the tape, simulating the degradation of older tape.
- PONAVLJANJA: Controls the feedback of the delay, determining the number of repeats.
- WOW & FLUTTER: Controls the amount of mechanically related tape speed fluctuations, adding vintage značaj.
- TAPE HEAD Switch: Selects between three tape head configurations: Fixed, Multi, and Single.
- Stikalo MODE: Selects between three different tape machine modes (A, B, C), each with unique characteristics.
- TAP Nožno stikalo: Tap twice to set the delay time. Hold to engage the Sound-on-Sound Looper.
- Nožno stikalo BYPASS: Vključi ali zaobide učinek.
Secondary Controls (Hidden Parameters)
The El Capistan features secondary functions accessible by holding both footswitches while powering on, or by holding the TAP footswitch and turning a knob. Refer to the full user manual for detailed instructions on accessing and adjusting these parameters.
- TIME (Secondary): Controls the spring reverb mix.
- MIX (Secondary): Controls a +/- 3dB boost/cut.
- REPEATS (Secondary): Controls the tape bias.
- TAPE AGE (Secondary): Controls the low-end contour.
- WOW & FLUTTER (Secondary): Controls the amount and severity of tape irregularities.
Vzdrževanje
To ensure the longevity and optimal performance of your El Capistan pedal:
- Pedal naj bo čist in brez prahu. Za čiščenje uporabljajte mehko, suho krpo.
- Pedala ne izpostavljajte ekstremnim temperaturam, vlagi ali neposredni sončni svetlobi.
- Do not attempt to open the enclosure or modify the internal components, as this will void the warranty.
- Always use the correct power supply (9V DC, center-negative, 100mA minimum) to prevent electrical damage.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Ni zvoka ali je signal šibek | Incorrect cable connections, faulty cables, incorrect power supply, pedal not engaged. | Check all cable connections (input/output). Ensure cables are not damaged. Verify power supply specifications. Press the BYPASS footswitch to engage the effect. |
| Neželen hrup ali brenčanje | Ozemljitvena zanka, okvarjeno napajanje, motnje zaradi druge elektronike. | Use an isolated power supply. Try a different power outlet. Move the pedal away from other electronic devices. |
| Effect not working as expected | Incorrect knob settings, secondary functions engaged unintentionally. | Review the operating instructions for knob functions and switch settings. Reset the pedal to factory defaults if necessary (refer to the full user manual for this procedure). |
| Nožno stikalo se ne odziva | Internal issue, debris under footswitch. | Ensure the pedal is powered correctly. If the issue persists, contact Strymon support. |
Specifikacije
- Znamka: Strymon
- Ime modela: El Capistan
- Številka modela: Elcapistan
- slog: Delay, Looper, Reverb
- barva: Black, Gray, Silver
- voltage: 9 volta
- Ampstarost: 100 milliamps
- Izhodni zvočni učinki: Zamuda
- Vrsta nadzora: Gumb
- vir energije: Električni na kabel
- Vmesnik strojne opreme: 1/4-palčni avdio
- Oblika signala: Analogni
- Dimenzije predmeta: 8 x 8 x 5 palcev
- Vrsta priključka: 1/4-palčni (6.35 mm) avdio priključek
- UPC: 852636007232
- Vključene komponente: Sound-on-Sound Looper, Onboard Spring Reverb
Garancija in podpora
Strymon products are designed for reliability and performance. For warranty information, product registration, or technical support, please visit the official Strymon webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Shranite dokazilo o nakupu za uveljavljanje garancije.
