Uporabniški priročnik za stikalo Cisco Catalyst serije 2960 WS-C2960S-48TS-L

Model: WS-C2960S-48TS-L

Uvod

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Cisco Catalyst 2960 Series Switch, model WS-C2960S-48TS-L. Designed for optimal power efficiency and robust network performance, this switch is a key component for various network environments. Please read this manual thoroughly before operating the device.

Varnostne informacije

Splošne varnostne smernice:

Ensure proper grounding for the device.
Stikala ne uporabljajte v mokrem ali prekomerno vlažnem okolju.
Use only the power supply unit provided or specified by Cisco.
Refer to local electrical codes and regulations for proper installation.
Izogibajte se blokiranju prezračevalnih odprtin, da preprečite pregrevanje.

Vsebina paketa

The Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L package should contain the following items:

Cisco Catalyst 2960 Series Switch (WS-C2960S-48TS-L)
Napajalna enota

Note: Rack mount kits and power cables are typically included but may vary by seller or region.

Konec izdelkaview

The Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L is a high-performance network switch designed for enterprise-class access. It features 48 Gigabit Ethernet ports and supports advanced power management capabilities for efficient network operation.

Spredaj view of Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L, showing 48 RJ45 ports and indicator lights.

Slika 1: Spredaj view of the Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L, displaying its 48 RJ45 ports and various indicator lights.

Nastavitev

1. Priprava mesta

Ensure the installation site is clean, dry, and has adequate ventilation. Maintain appropriate temperature and humidity levels as per environmental specifications to ensure optimal performance and longevity of the switch.

2. Namestitev stikala

The switch can be mounted in a standard 19-inch equipment rack. Secure the rack-mount brackets (if provided) to the sides of the switch using the appropriate screws. Then, attach the switch to the rack using suitable rack screws, ensuring it is stable and level.

3. Priključitev napajanja

Connect the power cable to the power supply unit on the rear of the switch and then to a grounded AC power outlet. Verify that the power source meets the switch's voltagzahteve (240 voltov).

4. Začetna omrežna povezava

Connect your network devices (e.g., computers, servers, other switches) to the RJ45 ports on the front panel using standard Ethernet cables. The switch supports a data transfer rate of 1000 Megabits Per Second (Gigabit Ethernet) for high-speed connectivity.

Upravljanje stikala

Vklop

After connecting the power cable, the switch will automatically power on. Observe the system LED indicators on the front panel for boot-up status. The system LED should turn green once the switch has successfully initialized.

Indikatorske lučke

The front panel features various LED indicators that display the operational status of the switch and its individual ports. These LEDs provide visual feedback on link status, activity, and potential errors. Refer to the official Cisco documentation for a detailed explanation of each LED's behavior and meaning.

Osnovna konfiguracija

For initial configuration and management, connect a console cable to the console port (if available) and use a terminal emulation program on a computer. Alternatively, if the switch has already acquired an IP address, you may be able to access its management interface via a web browser or command-line interface (Telnet/SSH).

Vzdrževanje

Čiščenje

Periodically clean the exterior of the switch with a soft, dry, lint-free cloth. Ensure that all ventilation openings are free from dust and obstructions to maintain proper airflow. Do not use liquid cleaners or aerosol sprays directly on the switch.

Posodobitve vdelane programske opreme

Regularly check the official Cisco support website for available firmware updates for your specific model. Keeping the firmware current ensures optimal performance, security, and access to new features. Always follow Cisco's official procedures for firmware upgrades to avoid potential issues.

Okoljski vidiki

Operate the switch within its specified temperature and humidity ranges. Extreme environmental conditions can lead to device malfunction or premature failure. Ensure the operating environment is stable and within recommended limits.

Odpravljanje težav

Brez moči

Verify the power cable is securely connected to both the switch and a functional power outlet.
Check the power source (e.g., wall outlet, power strip) for functionality.
Ensure the power supply unit is correctly seated and connected to the switch.

Ni omrežne povezave

Check the link status LEDs on the connected ports. If an LED is off, verify the Ethernet cable connection at both ends.
Ensure the connected device (e.g., computer, server) is powered on and functioning correctly.
Verify that the network configuration (IP addresses, VLANs) is correct for the connected devices and the switch.

Motnje v delovanju sistema

If the switch exhibits unusual behavior or error messages, consult the official Cisco documentation for specific error codes or LED patterns. A factory reset might be necessary as a last resort, but be aware that this will erase all custom configurations on the switch.

Specifikacije

The following are key specifications for the Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L:

Funkcija	Podrobnost
Številka modela	WS-C2960S-48TS-L
Znamka	Cisco
Število vrat	48 (RJ45)
Hitrost prenosa podatkov	1000 megabitov na sekundo (gigabitni Ethernet)
Vrsta vmesnika	RJ45
voltage	240 volta
Teža predmeta	10.6 funta (približno 4.81 kg)
Dimenzije izdelka	17.52 x 11.77 x 1.77 palca (približno 44.5 x 29.9 x 4.5 cm)
Združljive naprave	Namizni računalnik (in druge omrežne naprave)

Informacije o garanciji

This Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L typically comes with a standard manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the documentation provided with your purchase or visit the official Cisco website. Any additional warranties offered by sellers are separate and should be verified with your point of purchase.

Podpora uporabnikom

For technical assistance, product documentation, or further support regarding your Cisco Catalyst 2960 Series Switch, please visit the official Cisco support website. You can find detailed contact information, knowledge bases, and resources on Cisco's Support Portal. Ensure you have your product model number (WS-C2960S-48TS-L) ready when contacting support.

	Vodnik za prehod na serijo Cisco Catalyst 2960/2960-SF/2960-S Vodnik za prehod s starejših modelov stikal Cisco Catalyst na serijo Cisco Catalyst 2960-L, s poudarkom na funkcijah in poteh selitve.
	Vodnik za konfiguracijo pametne namestitve Cisco Naučite se konfigurirati Cisco Smart Install za uvajanje brez dotika in učinkovito upravljanje slik/konfiguracij omrežnih stikal Cisco. Ta priročnik zajema nastavitev, upravljanje odjemalcev, konfiguracijo DHCP/TFTP in strategije združevanja.
	Vodnik za enostavno namestitev serije Cisco Catalyst 2960-L Navodila po korakih za enostavno nastavitev stikala Cisco Catalyst serije 2960-L, ki zajemajo povezavo in osnovno konfiguracijo.
	Vodnik za stikala Cisco: Obsežen vodnikview Rešitve za preklop LAN-a Večview obsežnega portfelja Ciscovih LAN stikal, s podrobnostmi o modularnih, fiksno-konfiguracijskih, rezinskih in virtualnih stikalih za campomrežja v ZDA, podružnicah in podatkovnih centrih. Poudarja skalabilnost, inteligenco in napredne funkcije.
	Opombe ob izdaji stikal Cisco Catalyst serije 3560-CX in 2960-CX – Cisco IOS 15.2(7)Ex Opombe ob izdaji programske opreme Cisco IOS različice 15.2(7)Ex za stikala serije Catalyst 3560-CX in 2960-CX, s podrobnim opisom funkcij, opozoril in sistemskih zahtev.
	Opombe ob izdaji stikala Cisco Catalyst serije 3650: Cisco IOS XE Denali 16.2.x Ta dokument vsebuje opombe ob izdaji za stikalo Cisco Catalyst serije 3650 s programsko opremo Cisco IOS XE Denali 16.2.x. Podrobno opisuje nove funkcije strojne in programske opreme, pomembne opombe in podprte modele strojne opreme.

Cisco WS-C2960S-48TS-L