1. Izdelek je končanview
The TP-Link TL-SF1008P is an 8-Port 10/100Mbps Desktop Switch with 4 PoE+ Ports, designed to provide a seamless network connection. It integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. Four of the eight Auto-Negotiation RJ45 ports (Port 1 to Port 4) support Power over Ethernet (PoE+) functionality. These PoE+ ports can automatically detect and supply power to IEEE 802.3at/af compliant Powered Devices (PDs).
This switch allows for the transmission of electrical power along with data over a single cable, enabling network expansion in locations without readily available power lines or outlets. It is suitable for powering devices such as Access Points (APs), IP Cameras, or IP Phones.
Slika 1: Spredaj view of the TP-Link TL-SF1008P PoE+ Switch.
2. Vsebina paketa
Preverite, ali vaš paket vsebuje naslednje elemente:
- TL-SF1008P Switch
- Napajalni adapter
- Napajalni kabel
- Navodila za namestitev
- Gumijaste noge
3. Nastavitev in namestitev
The TL-SF1008P is designed for easy installation and use, requiring no software configuration. It features a plug-and-play design.
3.1 Fizična namestitev
Stikalo lahko postavite na mizo ali namestite na steno. Zagotovite zadostno prezračevanje okoli naprave.
Figure 2: Simple Plug and Play setup involves plugging in the power and connecting devices.
3.2 Povezovanje naprav
Connect your network devices (e.g., router, NVR, computers, printers, IP cameras, IP phones, access points) to the RJ45 ports on the switch. Ports 1-4 are PoE+ enabled.
Slika 3: Nprample application scenario showing the TL-SF1008P connecting various devices, including PoE-powered ones.
4. Načini delovanja in funkcije
The TL-SF1008P offers several features to optimize network performance and reliability.
4.1 Razširjeni način
Extend Mode allows for data and power PoE transmission over distances up to 250 meters, which is ideal for surveillance systems where devices may be located far from the switch. When Extend Mode is active, the port speed will be downgraded to 10 Mbps.
Figure 4: Comparison of standard 100m transmission and 250m Extend Mode transmission for IP cameras.
4.2 Priority Mode
The switch incorporates a priority function to protect the system when the total PoE power consumption exceeds the budget. If the power consumption of all PoE PDs is greater than or equal to 53W, a priority will be assigned among the PoE ports (Port 1 > Port 2 > Port 3 > Port 4). The system will then cut off power to the lowest-priority port to protect the system. This mode ensures high-quality transmission for critical applications like video or voice data.
4.3 Samodejna obnovitev PoE
PoE Auto Recovery automatically detects and reboots unresponsive PoE-powered devices. This feature eliminates the need for manual monitoring or resetting, enhancing system reliability.
Figure 5: Diagram illustrating the PoE Auto Recovery function, which reboots unresponsive PoE devices.
5. Specifikacije
| Funkcija | Opis |
|---|---|
| Dimenzije izdelka | 11.6"D x 7.1"Š x 1.7"V (294 x 180 x 44 mm) |
| Teža predmeta | 1.15 gramov (0.041 unč) |
| voltage | 48 volta |
| Material ohišja | Kovina |
| Maximum Power (Switch) | 60.2 vatov |
| PoE Power Budget | 66W (4 PoE+ Ports) |
| Max. Power per PoE+ Port | 30 W |
| Ocena zgornje temperature | 40 stopinj Celzija |
| Vrsta vmesnika | 8 10/100Mbps RJ45 Ports (AUTO Negotiation/AUTO MDI/MDIX) |
| Hitrost prenosa podatkov | 100 megabitov na sekundo |
| Trenutna ocena | 1.25 Amps |
| Številka modela | TL-SF1008P |
| Združljive naprave | Camera, Printer, IP Phone, Access Point |
| Nadzor pretoka | IEEE 802.3X |
| Brezhiben dizajn | ja |
6. Vzdrževanje
To ensure optimal performance and longevity of your TP-Link TL-SF1008P switch, consider the following maintenance guidelines:
- Okoljski pogoji: Operate the switch within the specified temperature range (0°C to 40°C) and humidity levels. Avoid exposing the device to direct sunlight, excessive heat, or moisture.
- Čiščenje: Zunanjost stikala redno čistite z mehko, suho krpo. Ne uporabljajte tekočih ali aerosolnih čistil. Prepričajte se, da so prezračevalne odprtine brez prahu in ovir.
- Upravljanje kablov: Omrežne kable imejte organizirane in pravilno pritrjene, da preprečite nenamerne odklope ali poškodbe.
- Napajanje: Use only the provided power adapter. Ensure the power connection is secure and stable.
7. Odpravljanje težav
If you encounter issues with your TL-SF1008P switch, consider the following basic troubleshooting steps:
- Brez napajanja: Ensure the power adapter is securely connected to both the switch and a working power outlet. Check the power LED indicator on the switch.
- Brez povezave/dejavnosti: Verify that the Ethernet cables are correctly connected to both the switch and the connected device. Check the Link/Act LEDs for the respective ports. Try using a different Ethernet cable.
- Naprava PoE se ne vklopi: Confirm that the connected device is IEEE 802.3at/af compliant. Check the PoE Max LED on the switch; if it's red, the system power might be overloaded, and Priority Mode may be active. Ensure the total power consumption of all PoE devices does not exceed the 66W budget.
- Slow Connection in Extend Mode: This is expected behavior. When Extend Mode is active, the port speed is intentionally reduced to 10 Mbps to achieve longer transmission distances.
Za podrobnejše odpravljanje težav ali trajne težave si oglejte razdelek za podporo.
8. Garancija in podpora
The TP-Link TL-SF1008P is backed by an industry-leading 3-year warranty.
8.1 Tehnična podpora
Free technical support is available from 6 AM to 6 PM PST, Monday to Friday.
For assistance, you can contact TP-Link support:
- telefon: (866) 225-8139
- Webspletno mesto: myproducts.tp-link.com/us
- E-pošta: podpora.ZDA@tp-link.com
Figure 6: TP-Link contact information for support.
