Leviton 1254-R

Leviton 15 Amp 125 Volt Industrial Grade 4-in-1 Receptacle (Model 1254-R) Instruction Manual

Model: 1254-R

1. Uvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Leviton 15 Amp, 125 Volt, Industrial Series Extra Heavy Duty Grade, 4-In-1 Receptacle, Model 1254-R. This device is designed for demanding environments requiring high-abuse tolerance, such as healthcare facilities, manufacturing plants, and educational institutions. It features four outlets in a single-gang footprint, offering increased power access without requiring larger electrical boxes.

2. Varnostne informacije

OPOZORILO: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. All wiring must be in accordance with national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.

3. Vsebina paketa

The package for the Leviton 1254-R 4-in-1 Receptacle typically includes:

4. Specifikacije

FunkcijaPodrobnost
Številka modela1254-R
Ampstarost15 Amp
voltage125 volt
OcenaIndustrial Series Extra Heavy Duty Grade
Vrsta posode4-In-1, Straight Blade, Grounding
barvaRdeča
MaterialThermoplastic Nylon (Cover and Body)
Možnosti ožičenjaBack and Side Wiring
KontaktiExtra Heavy-Duty, T-type triple-wipe bronze
DimenzijePribližno 8 x 8 x 8 cm (dimenzije izdelka)
TežaPribližno 6.4 unč

5. Namestitev

Follow these steps for proper installation of your Leviton 4-in-1 Receptacle. If you are not familiar with electrical wiring, consult a qualified electrician.

  1. Izklopite napajanje: Locate the circuit breaker or fuse that controls the outlet where you intend to install the receptacle. Turn it OFF. Verify that the power is off using a voltage tester.
  2. Odstranite staro vtičnico (če je primerno): Unscrew the wall plate and then the mounting screws holding the existing receptacle in the electrical box. Carefully pull the old receptacle out of the box.
  3. Odklopite žice: Disconnect the wires from the old receptacle. Note which wire was connected to which terminal (hot, neutral, ground).
  4. Pripravite žice: Strip approximately 1/2 inch of insulation from the ends of the wires if necessary. Ensure the wire ends are clean and straight.
  5. Connect Wires to New Receptacle:
    • Povežite HOT (Black or Red) žico do Medenina priključne vijake.
    • Povežite NEVTRALNO (bela) žico do Srebrna priključne vijake.
    • Povežite GROUND (Green or Bare Copper) žico do zelena ozemljitveni vijak.

    This receptacle supports both back-wiring (inserting wires into holes on the back and tightening screws) and side-wiring (wrapping wires around terminal screws). Ensure connections are tight and no bare wire is exposed outside the terminals.

    Leviton 1254-R 4-in-1 Receptacle, Red

    Slika 5.1: Spredaj view of the Leviton 1254-R 4-in-1 Receptacle in Red. This image shows the four outlets and the robust construction.

    Close-up of receptacle wiring terminals

    Slika 5.2: Bližnji posnetek view of a Leviton receptacle's wiring terminals, illustrating the side-wiring option and the grounding screw.

  6. Priključek za montažo: Carefully push the wired receptacle back into the electrical box. Secure it with the provided mounting screws.
  7. Namestite stensko ploščo: Stensko ploščo pritrdite čez vtičnico.
  8. Obnovi moč: Turn the circuit breaker or fuse back ON.
  9. Test: Plug a device into each of the four outlets to ensure proper function.

The 1254-R features an interlocking thermoplastic nylon cover and body for enhanced durability and a nickel-plated brass strap with integral ground contacts for reliable grounding. The permanent "Green Dot" marking on the face indicates its hospital/industrial grade compliance.

Close-up of receptacle with green dot marking

Image 5.3: Detail showing the "Green Dot" marking, signifying the industrial/hospital grade rating of the receptacle.

6. Delovanje

The Leviton 1254-R 4-in-1 Receptacle operates like any standard electrical outlet. Simply insert the plug of your electrical device into one of the four available receptacles. Ensure the plug is fully inserted for a secure connection. The extra heavy-duty, T-type triple-wipe bronze contacts provide maximum performance and a strong grip on cords.

7. Vzdrževanje

This industrial-grade receptacle requires minimal maintenance. Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the receptacle immediately. Clean the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.

8. Odpravljanje težav

TežavaMožen vzrokrešitev
Na vtičnici ni moči.Circuit breaker tripped or fuse blown. Loose wiring connection.Check and reset the circuit breaker or replace the fuse. Turn off power and inspect wiring connections for tightness.
Device plug feels loose in the outlet.Worn contacts (unlikely for new industrial grade). Incorrect plug type.Ensure the plug is fully inserted. If the issue persists, and the receptacle is old, consider replacement. Verify plug compatibility.
Receptacle is warm to the touch.Overload on the circuit. Loose wiring connection.Disconnect some devices to reduce load. Turn off power and check wiring connections. If warming persists, consult an electrician.

9. Informacije o garanciji

Leviton products are backed by a limited warranty. For specific warranty terms and conditions applicable to the 1254-R receptacle, please refer to the warranty documentation included with your purchase or visit the official Leviton webspletnega mesta. Shranite dokazilo o nakupu za uveljavljanje garancije.

10. Podpora

For technical assistance, product information, or customer support, please visit the official Leviton website or contact their customer service department. Contact details can typically be found on the product packaging or the Leviton webmesto.

Leviton Webspletno mesto: www.leviton.com

Povezani dokumenti - 1254-R

Prejview Navodila za namestitev in uporabo vtičnice Leviton GFCI z USB vrati
Celovit vodnik za namestitev in delovanje Leviton GFCI vtičnic z USB vrati, vključno z navodili za ožičenje, varnostnimi opozorili, postopki testiranja in informacijami o garanciji.
Prejview Namestitev in testiranje pametne vtičnice Leviton GFCI: celovit vodnik
Navodila po korakih za namestitev in testiranje vtičnic Leviton Smart GFCI (modela D2GF1, D2GF2). Spoznajte delovanje GFCI, ožičenje, odpravljanje težav in varnostne ukrepe.
Prejview Vodnik za namestitev in testiranje vtičnice Leviton SmartlockPro GFCI
Celovit vodnik za namestitev in testiranje vtičnic Leviton SmartlockPro z zaščitnim stikalom proti ozemljitvi (GFCI). Zajema varnostne ukrepe, ožičenje, odpravljanje težav in funkcije izdelka.
Prejview Vodnik za namestitev in testiranje vtičnic Leviton GFCI
Celovit vodnik za namestitev in testiranje vtičnice Leviton SmartLock Pro GFCI, vključno z navodili za ožičenje, varnostnimi ukrepi in nasveti za odpravljanje težav.
Prejview Navodila za namestitev vtičnice GFCI Leviton GFNT1-DIN/GFNT2-DIN za montažo na DIN-letev
Celovit vodnik za namestitev in testiranje Levitonovih vtičnic GFNT1-DIN in GFNT2-DIN za montažo na DIN-letev GFCI, vključno z navodili za ožičenje, varnostnimi ukrepi in odpravljanjem težav.
Prejview Leviton Smart Wallbox Sensors: Elevate Your Sensing Control Options
Discover Leviton Smart Wallbox Sensors for commercial applications, offering occupancy/vacancy sensing, dimming, switching, energy savings, and code compliance for offices, meeting rooms, and lobbies. Learn about key features and benefits.