Leviton 20A 125V Industrial Grade 4-in-1 Receptacle User Manual

Uvod

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Leviton 20A 125V Industrial Grade 4-in-1 Receptacle, Model 21254-HI. Please read this manual thoroughly before installation and retain it for future reference.

Varnostne informacije

OPOZORILO: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.

POZOR: Use this device only with copper or copper-clad wire. Do not use with aluminum wire.

Lastnosti izdelka

• 20 Amp, 125 Volt rating
• Grounding type receptacle
• Durable Nylon body material
• Zinc-plated steel 8-32 mounting screws
• Industrial Series Extra Heavy Duty Hospital Grade design
• 4-in-1 receptacle configuration
• Ivory color finish

Vsebina paketa

• 1 x Leviton 20A 125V Industrial Grade 4-in-1 Receptacle (Model 21254-HI)

Image: Leviton 20A 125V Industrial Grade 4-in-1 Receptacle in Ivory. This image shows the front view of the electrical outlet with four receptacles.

Navodila za namestitev

1. Izklopite napajanje: Locate the circuit breaker or fuse box that controls the power to the outlet where you intend to install the receptacle. Turn off the power completely and verify it is off using a voltage tester.
2. Odstranite staro vtičnico (če je primerno): Carefully remove the wall plate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting their connections (hot, neutral, ground).
3. Pripravite žice: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. Ensure wires are straight and free of nicks.
4. Povežite žice:
   • Povežite zelena ali gola bakrena ozemljitvena žica to the green grounding screw on the receptacle.
   • Povežite white neutral wire to the silver-colored screw terminals.
   • Povežite black or colored hot wire to the brass-colored screw terminals.

   Ensure all connections are tight and secure. For back-wiring, insert stripped wires into the appropriate holes and tighten screws.

5. Priključek za montažo: Carefully fold the wires into the electrical box. Secure the new receptacle to the electrical box using the provided mounting screws.
6. Namestite stensko ploščo: Stensko ploščo pritrdite čez vtičnico.
7. Obnovi moč: Ponovno vklopite napajanje na odklopniku ali v omarici z varovalkami.
8. Test: Test the receptacle with a known working device to ensure proper operation.

Always consult a qualified electrician if you are unsure about any part of the installation process.

Delovanje

The Leviton 21254-HI receptacle provides four outlets for connecting electrical devices. Simply insert the plug of your device into any of the available outlets. This heavy-duty receptacle is designed for demanding environments, offering reliable power connections.

Pomembno: Do not overload the receptacle. Ensure the total current draw of all connected devices does not exceed the 20 Amp rating of the receptacle.

Vzdrževanje

• Čiščenje: To clean the receptacle, first turn off the power at the circuit breaker. Use a soft, damp cloth to wipe the surface. Do not use abrasive cleaners or solvents.
• Pregled: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is found, turn off power and replace the receptacle immediately.
• Tesnost: Ensure mounting screws and wire connections remain tight. Loose connections can cause overheating.

Odpravljanje težav

Specifikacije

Garancija in podpora

For warranty information or technical support, please contact Leviton customer service. Details can typically be found on the product packaging or the official Leviton webmesto.

Levitonov uradnik Webspletno mesto: www.leviton.com