Intermatic EI400WC Electronic Auto-Off Timer

1. Uvod

The Intermatic EI400WC Electronic Auto-Off Timer is designed to provide convenient and energy-efficient control over various electrical loads. This in-wall timer allows for precise countdown timing from 1 second to 24 hours, making it suitable for a wide range of applications including lighting, fans, and appliances. Its user-friendly interface and robust design ensure reliable operation.

2. Varnostne informacije

WARNING: Risk of Electric Shock. May result in serious injury or death. Turn power OFF at circuit breaker before installing.

• Namestitev mora opraviti usposobljen električar ali usposobljeno osebje.
• Zagotovite, da upoštevate vse lokalne in nacionalne električne predpise.
• Do not use with sunlamps, savne ali obremenitve, ki bi lahko povzročile telesne poškodbe, če bi bili časovno nepravilni.
• Preverite, ali je glasnost časovnikatage and current ratings are compatible with your application.
• Ta naprava je namenjena samo za uporabo v zaprtih prostorih.

3. Vsebina paketa

• Intermatic EI400WC Electronic Auto-Off Timer
• Montažni vijaki
• Žične matice
• Navodila za uporabo (ta dokument)

4. Namestitev

The EI400WC timer is designed for easy installation, compatible with both single-pole and 3-way switch configurations. It does not require a neutral wire connection, simplifying retrofitting.

4.1. Električna shema zgorajview

Below is an image of the Intermatic EI400WC timer, showing its compact design and wiring leads for installation into a standard wall box.

Figure 1: Intermatic EI400WC Electronic Auto-Off Timer with wiring leads.

4.2. Koraki namestitve

1. Izklopite napajanje: Locate the circuit breaker controlling the switch you are replacing and turn it OFF. Verify power is off using a voltage tester.
2. Odstranite obstoječe stikalo: Previdno odstranite stensko ploščo in odvijte obstoječe stikalo iz stenske omarice. Odklopite žice s starega stikala.
3. Connect the timer:
   • Connect the timer's wires to the corresponding house wires using the provided wire nuts. Refer to the specific wiring diagram for single-pole or 3-way applications.
   • The EI400WC does not require a neutral wire, simplifying connections.
   • Zagotovite, da so vse povezave varne.
4. Mount the timer: Gently push the connected wires back into the wall box. Secure the timer to the wall box using the mounting screws.
5. Namestitev stenske plošče: Attach the new or existing wall plate over the timer.
6. Obnovite napajanje: Ponovno vklopite napajanje na odklopniku.

4.3. Video vodnik za namestitev

For a visual guide on installing and setting up Intermatic in-wall timers, including the EI400 series, please watch the following video. The relevant section for programmable electronic timers begins at 0:55.

5. Nastavitev in programiranje

The EI400WC timer offers simple programming for countdown times from 1 second to 24 hours. Settings are stored in a non-volatile memory.

1. Setting the Countdown Time: Use the '+' and '-' buttons on the timer to adjust the desired countdown duration. The digital display will show the selected time.
2. Aktiviranje časovnika: Press the 'on/off' button once to activate the countdown. The connected load will turn ON and remain on for the programmed duration.
3. Audible/Visual Warning: The timer can be configured to provide a visual or audible warning before the countdown expires and the load turns OFF. Refer to the detailed manual for specific warning setup.
4. Lockable Settings: To prevent unintended changes to the programmed settings, the timer features a lockable setting. Consult the full manual for instructions on enabling/disabling this feature.

6. Navodila za uporabo

• Starting a Countdown: Once the desired time is set, press the 'on/off' button to begin the countdown. The load will turn ON.
• Stopping the Countdown Early: If you wish to turn off the connected load before the programmed time expires, simply press the 'on/off' button again. The load will turn OFF immediately.
• Zaustavitev časovnika: The 'pause' button allows you to temporarily halt the countdown. Press it once to pause, and again to resume.

7. Vzdrževanje

The Intermatic EI400WC timer is designed for minimal maintenance. The internal CR2 lithium battery provides power for up to three years and is replaceable.

7.1. Zamenjava baterije

1. Izklopite napajanje: For safety, turn off power to the timer at the circuit breaker before replacing the battery.
2. Access battery compartment: Locate the battery compartment, usually behind a small cover on the front or side of the timer.
3. Zamenjajte baterijo: Remove the old CR2 lithium battery and insert a new one, ensuring correct polarity.
4. Zapri predal: Varno zaprite pokrov prostora za baterije.
5. Obnovite napajanje: Ponovno vklopite napajanje na odklopniku.

8. Odpravljanje težav

If the problem persists after attempting these solutions, please contact Intermatic customer support.

9. Specifikacije

• Model: EI400WC
• voltage: 120-277 VAC
• Trenutna ocena: Do 20 Amps
• Obseg časovnika: 1 sekunda do 24 ur
• Baterija: 1 x CR2 Lithium (included, replaceable)
• Material: Plastika
• barva: Bela
• Dimenzije: 4.13 x 1.75 x 1.2 palca (dimenzije izdelka)
• Teža: 6.08 unč
• Združljivost: Single-pole or 3-way switch compatible
• Certifikati: CSA certificirano

10. Garancija in podpora

The Intermatic EI400WC Electronic Auto-Off Timer comes with a 5-letna omejena garancija od datuma nakupa. Ta garancija krije napake v materialu in izdelavi pri normalni uporabi in servisiranju.

For warranty claims, technical support, or further assistance, please visit the official Intermatic webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Za potrditev garancije shranite dokazilo o nakupu.

Intermatic Official Webspletno mesto: www.intermatic.com