Intermatic FM1D20A-24 Electronic 24-Hour/7-Day Timer Module Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, setup, operation, and maintenance of the Intermatic FM1D20A-24 Electronic 24-Hour/7-Day Timer Module. Please read this manual thoroughly before attempting to install or operate the device to ensure proper function and safety.

2. Varnostne informacije

OPOZORILO: Risk of electric shock. Installation and servicing of this device should be performed by qualified personnel only. Disconnect power at the circuit breaker or fuse before installing or servicing. Follow all national and local electrical codes.

• Prepričajte se, da napajalnik ustreza glasnosti napravetagnazivna vrednost električne energije (24 V).
• Ne prekoračite največje dovoljene tokovne moči 16 A.
• Napravo hranite stran od vlage in ekstremnih temperatur.
• Naprave ne poskušajte odpirati ali popravljati sami. Obrnite se na usposobljeno servisno osebje.

3. Vsebina paketa

Ob razpakiranju preverite, ali so prisotne vse komponente:

• 1 x Intermatic FM1D20A-24 Electronic 24-Hour/7-Day Timer Module

4. Izdelek je končanview

The Intermatic FM1D20A-24 is an electronic timer module designed for precise 24-hour and 7-day scheduling. It features a digital display and intuitive controls for programming up to 20 ON/OFF operations.

Slika 1: Spredaj view of the Intermatic FM1D20A-24 Timer Module, showing the digital display and control buttons.

Slika 2: Od blizu view of the timer module's display, indicating current time and day, along with the 'Mode', '+', 'OVR AUTO', 'Res', 'Menu', 'OK', and '+1h' buttons.

Slika 3: Stran view of the timer module, illustrating its compact design and potential mounting points for surface or DIN rail installation.

5. Namestitev

The FM1D20A-24 timer module supports both surface and DIN rail mounting.

5.1 Montaža

• Površinska montaža: Secure the module to a flat surface using appropriate screws through the designated mounting holes.
• Montaža na DIN-letev: Attach the module to a standard DIN rail by snapping it into place.

5.2 Ožičenje

POMEMBNO: All wiring must comply with local and national electrical codes. Ensure power is disconnected before wiring.

1. Connect the 24V power supply to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. The timer module features an SPDT (Single Pole Double Throw) switch style.
3. Pred ponovno vzpostavitvijo napajanja preverite, ali so vse povezave varne.

6. Nastavitev

6.1 Začetni vklop

Upon initial power-up, the display may be blank or show default settings. The internal clock will need to be set.

6.2 Nastavitev trenutnega časa in dneva

1. Press the 'Mode' button to enter the time setting mode.
2. Use the '+' button to adjust the hour, minute, and day.
3. Press 'OK' to confirm each setting and move to the next.
4. Once the time and day are set, press 'OK' to exit the setting mode.

6.3 Programiranje dogodkov VKLOP/IZKLOP

The timer supports up to 20 ON/OFF operations.

1. Press the 'Menu' button to access the programming menu.
2. Navigate through the program slots (P1 ON, P1 OFF, P2 ON, P2 OFF, etc.) using the '+' button.
3. For each program slot, press 'OK' to select it.
4. Use the '+' button to set the desired time and day(s) for the ON or OFF event.
5. Press 'OK' to confirm each setting.
6. Repeat for all desired ON/OFF events.
7. Press 'Menu' to exit the programming mode.

7. Navodila za uporabo

7.1 Manual Override (OVR AUTO)

The 'OVR AUTO' button allows for temporary manual control of the output, overriding the programmed schedule. Pressing it will toggle the output state (ON/OFF) and return to automatic operation at the next scheduled event.

7.2 Time Adjustment (+1h)

The '+1h' button can be used for quick adjustment of the current time, typically for daylight saving time changes. Pressing it will advance the current time by one hour.

7.3 Reset Function (Res)

The 'Res' (Reset) button is typically a recessed button that requires a pointed object (like a pen tip) to press. This button will reset the timer to its factory default settings, erasing all programmed events and resetting the clock. Use with caution.

8. Vzdrževanje

The Intermatic FM1D20A-24 timer module requires minimal maintenance.

• Čiščenje: Zunanjost naprave obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Baterija: This device does not require user-replaceable batteries for operation or memory retention.
• Pregled: Občasno preverite tesnost priključkov in morebitne znake obrabe ali poškodb.

9. Odpravljanje težav

9.1 Zaslon je prazen

• Check if the power supply (24V) is connected and active.
• Prepričajte se, da so vse napeljave varne.

9.2 Programmed Events Not Executing

• Preverite, ali sta trenutni čas in dan pravilno nastavljena.
• Check that the programmed ON/OFF times and days are accurate.
• Ensure the timer is not in manual override mode (check 'OVR AUTO' status).
• Confirm the load is properly connected and functional.

9.3 Naprava se ne odziva

• Attempt a soft reset by pressing the 'Res' button with a pointed object. Note that this will erase all settings.
• If the issue persists, disconnect power for a few minutes and then restore it.

10. Specifikacije

11. Garancija in podpora

For warranty information, please refer to the manufacturer's description or contact Intermatic customer support directly. Technical assistance and further support can be obtained through the official Intermatic webmestu ali pooblaščenih servisih.

Proizvajalec: Intermatic Incorporated

Webspletno mesto: www.intermatic.com