1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of the Intermatic MIL72ESTUZH-120 24-Hour 120V Flush Mount Electromechanical Time Control. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and correct usage.
2. Varnostne informacije
OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izklopite napajanje na odklopniku ali v omarici z varovalkami.
- Vse ožičenje mora biti v skladu z lokalnimi in nacionalnimi električnimi predpisi.
- Montažo naj izvede usposobljen električar.
- Do not exceed the maximum electrical ratings of the device.
- Poskrbite za pravilno ozemljitev, da preprečite nevarnosti električnega toka.
- Otroke hranite stran od električnih naprav.
3. Izdelek je končanview
The Intermatic MIL72ESTUZH-120 is a robust 24-hour electromechanical timer module designed for flush or panel mounting within a control panel. It is suitable for light-duty commercial applications requiring precise time control for 120 VAC single-phase circuits. Common uses include lighting, HVACR systems, pumps, motors, and general electrical circuit management.
Slika: spredaj view of the Intermatic MIL72ESTUZH-120 timer. The device features a clear protective cover over a black dial. The dial displays a 24-hour format with AM/PM indicators and minute markings. A central clock mechanism with hour and minute hands indicates the current time. The outer edge of the dial contains captive trippers for setting ON/OFF periods. A manual override switch is visible on the right side of the dial.
Ključne značilnosti:
- 21 A SPDT Switch: Provides reliable switching for various loads.
- Synchronous Drive with Self-Recharging Battery Backup: Ensures accurate timekeeping and operation during power outages.
- Captive Trippers: Allows for easy setting of 15-minute ON/OFF intervals.
- Ročna preglasitev: Provides flexibility to temporarily bypass programmed settings.
- Zasnova podometne montaže: Integrates seamlessly into control panels.
4. Specifikacije
| Specifikacija | Podrobnost |
|---|---|
| Številka modela | MIL72ESTUZH-120 |
| Znamka | Intermatic |
| voltage | 120 V |
| Tip stikala | SPDT (enojni polni dvojni preklopnik) |
| Ampstarost | 21 A |
| Cikel | 24-urni |
| Vrsta namestitve | Flush/Panel Mount |
| Rezervna baterija | Self-recharging Nickel Metal Hydride (non-replaceable) |
| Minimalni čas vklopa/izklopa | 15 minutes (using captive trippers) |
| Material | Kovina |
| Dimenzije izdelka | 30"D x 8"W x 6"H (Note: These dimensions appear to be for packaging or a larger assembly, actual timer module dimensions will be smaller for flush mounting.) |
| Teža predmeta | 4 unč |
5. Namestitev
Preden začnete:
- Prepričajte se, da je napajanje IZKLOPLJENO na glavnem odklopniku.
- Preverite, ali je dobava voltage matches the timer's rating (120V AC).
- Have appropriate tools ready (screwdriver, wire strippers, etc.).
Montaža:
- Select a suitable location within a control panel for flush mounting.
- Cut an appropriate opening in the panel according to the timer's dimensions.
- Insert the timer into the opening and secure it using the provided mounting hardware.
Ožičenje:
Refer to the wiring diagram provided with the product packaging for specific connections. General wiring steps include:
- Connect the incoming 120V AC line wire to the designated terminal.
- Povežite nevtralno žico z nevtralno sponko.
- Connect the load wire(s) (e.g., to lights, motor) to the appropriate switched terminals (normally open or normally closed, depending on desired operation).
- Prepričajte se, da so vse povezave varne in izolirane.
After wiring, restore power and proceed to initial setup.
6. Delovanje
Nastavitev trenutnega časa:
- Rotate the entire dial clockwise until the current time aligns with the time indicator arrow (usually a small triangle or line on the stationary part of the timer housing).
- Ensure you distinguish between AM and PM hours on the 24-hour dial.
Nastavitev programov VKLOP/IZKLOP:
The timer uses captive trippers around the dial to set program times. Each tripper represents a 15-minute interval.
- To set an ON period, push the trippers outwards for the desired duration.
- To set an OFF period, leave the trippers in their inward position for the desired duration.
- The timer will activate the connected load when the dial rotates past an outward-pushed tripper and deactivate it when it rotates past an inward-pushed tripper.
Ročna preglasitev:
The MIL72ESTUZH-120 features a manual override switch, typically a small lever or button, located on the timer face. This allows you to temporarily switch the load ON or OFF, overriding the programmed schedule without affecting future cycles.
- Move the override switch to the desired position (ON or OFF).
- Časovnik bo nadaljeval s programiranim urnikom ob naslednjem načrtovanem dogodku VKLOP ali IZKLOP.
7. Vzdrževanje
The Intermatic MIL72ESTUZH-120 is designed for minimal maintenance.
- Čiščenje: Zunanjost časovnika občasno obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
- Baterija: The unit contains a non-replaceable, self-recharging Nickel Metal Hydride battery for power outage carry-over. No user maintenance is required for the battery.
- Pregled: Annually inspect the timer for any signs of damage, loose connections, or unusual operation. If any issues are found, disconnect power and consult a qualified electrician.
8. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Časovnik ne deluje | No power to the timer; Motor failure | Check circuit breaker/fuse; Verify wiring connections; Contact support if motor is faulty. |
| Load not turning ON/OFF at programmed times | Incorrect time setting; Trippers not set correctly; Manual override engaged | Adjust current time; Ensure trippers are pushed in/out as desired; Check manual override switch position. |
| Manual override not working | Switch mechanism faulty; Internal wiring issue | Ensure switch is fully engaged; Contact support if issue persists. |
| Timer making unusual noises | Notranja mehanska težava | Disconnect power immediately; Contact support. |
9. Garancija in podpora
For warranty information and technical support, please refer to the documentation included with your product or visit the official Intermatic webspletnega mesta. Račun shranite kot dokazilo o nakupu za morebitne garancijske zahtevke.
Podpora strankam Intermatic:
- Webspletno mesto: www.intermatic.com
- Contact information can typically be found in the 'Support' or 'Contact Us' section of their webmesto.
