Intermatic EI400C

Intermatic EI400C Electronic Countdown In-Wall Timer User Manual

Model: EI400C

1. Uvod

The Intermatic EI400C Electronic Countdown In-Wall Timer is designed to provide automatic shut-off functionality for various electrical loads, including indoor and outdoor lighting, bathroom fans, whole house fans, and other appliances. This timer offers precise control from 1 second to 24 hours, enhancing convenience and energy efficiency in your home or office. Its silent operation and simple push-button interface make it user-friendly, while its no-neutral wire requirement simplifies installation in most standard wall boxes.

2. Pomembne varnostne informacije

WARNING: Risk of Electric Shock. Improper installation can lead to serious injury or death.

  • Always turn off power at the circuit breaker or fuse box before installing or servicing the timer.
  • Namestitev mora opraviti usposobljen električar ali pa mora biti v skladu z vsemi lokalnimi in nacionalnimi električnimi predpisi.
  • Do not use this timer with sunlamps, saunas, or any loads that could cause personal injury if timed incorrectly or if the timer malfunctions.
  • Prepričajte se, da so vse žične povezave varne in pravilno izolirane.
  • Ta naprava je namenjena samo za uporabo v zaprtih prostorih.

3. Izdelek je končanview

The Intermatic EI400C is an electronic countdown timer designed for in-wall installation. It features a digital display and intuitive controls for setting countdown durations.

3.1 Komponente

  • Digitalni zaslon: Shows current time and countdown status.
  • Gumb za vklop/izklop: Activates or deactivates the timer.
  • Gumba plus (+) / minus (-): Adjust countdown duration.
  • Gumb za premor: Temporarily stops the countdown.
  • Predal za baterije: Houses the CR2 lithium battery.

3.2 Slike izdelkov

Intermatic EI400C Timer installed with wall plate
Slika 1: Intermatic EI400C Electronic Countdown Timer installed in a wall plate, showing the digital display.
Spredaj view of Intermatic EI400C Timer without wall plate
Slika 2: Spredaj view of the EI400C timer module, revealing its compact design before wall plate installation.
Stran view of Intermatic EI400C Timer showing wiring details
Slika 3: Stran view of the EI400C timer, illustrating the wiring terminals and load ratings printed on the side.
Intermatic EI400C Timer with front cover open, revealing control buttons
Slika 4: The EI400C timer with its front cover opened, exposing the 'pause', 'on/off', and adjustment buttons for programming.

4. Nastavitev in namestitev

The Intermatic EI400C timer is designed for easy installation, compatible with single-pole or 3-way switch configurations and does not require a neutral wire connection.

4.1 Koraki pred namestitvijo

  1. Izklopite napajanje: Locate the circuit breaker or fuse that controls the switch you are replacing and turn off the power. Verify power is off using a voltage tester.
  2. Odstranite obstoječe stikalo: Previdno odstranite stensko ploščo in odvijte obstoječe stikalo iz stenske omarice. Odklopite žice s starega stikala.

4.2 Navodila za ožičenje

The EI400C timer is compatible with both single-pole and 3-way switch setups. Refer to the diagram provided with your product for specific wiring configurations. Generally, the timer will have two load wires and a ground wire. For 3-way applications, one of the traveler wires from the existing 3-way switch will be connected to the timer.

  • Connect the timer's wires to the corresponding house wires using wire nuts.
  • Prepričajte se, da so vse povezave tesne in varne.
  • The EI400C does not require a neutral wire, simplifying installation in older homes.

4.3 Mounting and Finalizing Installation

  1. Carefully push the wired timer into the wall box.
  2. Secure the timer to the wall box with the provided screws.
  3. Pritrdite okrasno stensko ploščo.
  4. Obnovi moč: Ponovno vklopite napajanje na odklopniku.

4.4 Namestitev baterije

The timer comes with a replaceable CR2 lithium battery, which powers the internal clock and settings memory. The battery is typically pre-installed or needs to be inserted upon initial setup.

  • Open the small front cover of the timer to access the battery compartment.
  • Insert the CR2 lithium battery, observing the correct polarity.
  • Trdno zaprite pokrov prostora za baterije.

5. Navodila za uporabo

The EI400C timer offers simple, push-button operation for setting countdown durations from 1 second to 24 hours.

5.1 Setting a Countdown Time

  1. Kontrole dostopa: Gently open the front cover of the timer to reveal the control buttons.
  2. Prilagodi čas: Uporabite + in - buttons to set the desired countdown duration. The display will show the selected time.
  3. Zaženi časovnik: Pritisnite Vklop/izklop button to activate the timer. The connected load will turn on, and the timer will begin counting down.

5.2 Turning Off Before Countdown Ends

If you wish to turn off the connected load before the set countdown time expires, simply press the Vklop/izklop button again. This will immediately turn off the load and reset the timer.

5.3 Funkcija premora

Pritisnite Premor button to temporarily halt the countdown. The connected load will remain on. Press Premor znova za odštevanje.

5.4 Lockable Settings

The timer features lockable settings to prevent unintended changes to the program. Refer to the detailed instructions included in the product packaging for how to activate and deactivate this feature.

5.5 Visual/Audible Warnings

The EI400C can be configured to provide a visual or audible warning before the timer turns off. Consult the full product manual for steps on enabling and customizing these warning options.

5.6 Navodila za videoposnetek

Posnetek 1: An official Intermatic video providing an overview of their in-wall timers, including the EI400 series. This video demonstrates general features and benefits of Intermatic in-wall timers, which are applicable to the EI400C model.

6. Vzdrževanje

The Intermatic EI400C timer requires minimal maintenance, primarily focusing on battery replacement.

6.1 Zamenjava baterije

The internal CR2 lithium battery provides power for the timer's memory and display, typically lasting up to three years. When the battery is low, a 'LoBatt' indicator may appear on the display.

  1. Open the front cover of the timer.
  2. Carefully remove the old CR2 battery from its compartment.
  3. Insert a new CR2 lithium battery, ensuring correct polarity.
  4. Varno zaprite sprednji pokrov.

Opomba: Some users have reported that the battery compartment cover can be difficult to open or may not stay securely closed after multiple battery changes. Exercise care when opening and closing the compartment. If the cover does not stay closed, ensure the battery makes proper contact.

7. Odpravljanje težav

This section addresses common issues you might encounter with your Intermatic EI400C timer.

TežavaMožen vzrokrešitev
Timer display is blank or shows 'LoBatt'Low or dead CR2 battery, or poor battery contact.Replace the CR2 lithium battery. Ensure the battery is inserted correctly and the compartment cover is securely closed to maintain contact.
Timer shows 'NoOP' errorIndicates a problem with battery contact or internal operation.Check and re-seat the CR2 battery. If the issue persists, the unit may require replacement.
Connected load does not turn on/offNo power to the timer, incorrect wiring, or faulty load.Verify power at the circuit breaker. Double-check wiring connections according to the installation instructions. Test the connected load (e.g., light bulb) with a different switch or power source.
Difficulty opening battery compartment coverTight fit or worn plastic tabs.Use a small, flat-head screwdriver to gently pry open the cover. Be careful not to damage the plastic tabs.
Timer does not hold settings after power outageDead or missing CR2 battery.The CR2 battery maintains settings during power outages. Ensure it is installed and functional.

8. Specifikacije

FunkcijaPodrobnost
Številka modelaEI400C
ZnamkaIntermatic
barvaSlonokoščena
MaterialPlastika
voltage120-277 VAC
Največja obremenitev20 Amps
Obseg časovnika1 Second to 24 Hours
Tip stikalaEnopolni ali tripolni
Vrsta namestitveStandard Wall Box, Rectangular Decorator Wall Plate
Zahtevana baterija1 CR2 Lithium (included)
Življenjska doba baterijeDo 3 let
Dimenzije4.13 x 1.75 x 1.2 palcev
Teža predmeta6 unče (0.38 funta)
CertificiranjeCSA certificirano
UPC078275101371

9. Garancija in podpora

9.1 Informacije o garanciji

The Intermatic EI400C Electronic Countdown In-Wall Timer comes with a 5-letna omejena garancijaTa garancija krije napake v materialu in izdelavi pri normalni uporabi. Za uveljavljanje garancije shranite dokazilo o nakupu.

9.2 Podpora strankam

Za tehnično pomoč, odpravljanje težav, ki presegajo ta priročnik, ali vprašanja v zvezi z garancijo se obrnite na podporo strankam Intermatic. Glejte uradno spletno stran Intermatic. webZa najnovejše kontaktne podatke obiščite spletno mesto ali embalažo izdelka.

Spletni viri: Obiščite Trgovina Intermatic na Amazonu za dodatne informacije o izdelku in vire.

Povezani dokumenti - EI400C

Prejview Intermatic HB880R Zunanji 7-dnevni digitalni časovnik: Navodila za uporabo in vodnik za nastavitev
Obsežen uporabniški priročnik za zunanji 7-dnevni digitalni časovnik Intermatic HB880R. Naučite se namestiti, programirati, nastaviti urnike in odpravljati težave s tem vsestranskim časovnikom.
Prejview Intermatic EI200 Elektronski stenski odštevalnik časa - Navodila za namestitev in uporabo
Podroben vodnik za elektronski vgradni odštevalnik časa Intermatic EI200. Zajema funkcije, nazivne vrednosti, korake namestitve, načine delovanja (način časovnika, način zadrževanja) in 1-letno omejeno garancijo. Vključuje diagrame ožičenja in varnostna opozorila.
Prejview Intermatic ET8215C Elektronski časovnik - Tehnični podatki
Podrobne tehnične specifikacije za elektronski časovnik Intermatic ET8215C, astronomski 7-dnevni, 2-krožni elektronski krmilnik, primeren za aplikacije 120–277 VAC v notranjem kovinskem ohišju.
Prejview Intermatic ST01 serija digitalnih vgradnih časovnikov - specifikacije in lastnosti
Podrobne specifikacije, lastnosti, ocene in diagrami namestitve za digitalne stenske časovnike Intermatic serije ST01. Enostavno programirljivi časovniki z astronomskimi funkcijami za preklapljanje med sončnim vzhodom in zahodom.
Prejview Stensko stikalo Intermatic EJ351 z notranjim časovnikom: Navodila za namestitev in uporabo
Ta dokument vsebuje navodila za namestitev in uporabo notranjega stenskega stikala s časovnikom Intermatic EJ351. Zajema specifikacije, ožičenje, načine programiranja (hitro in 24-urno), vsakodnevno uporabo, odpravljanje težav in enoletno omejeno garancijo.
Prejview Intermatic EI220 Elektronski stenski odštevalnik časa: Navodila za namestitev in uporabo
Comprehensive guide for installing and operating the Intermatic EI220 electronic in-wall countdown timer. Covers features, electrical ratings, step-by-step installation, operational modes (Timer and Hold), and warranty information.