1. Uvod in konecview
The Bosch GBH 2400 is a robust corded rotary hammer designed for drilling in concrete, masonry, wood, and metal, as well as for chiseling applications. This manual provides essential information for safe and efficient operation, setup, maintenance, and troubleshooting of your tool.
Image 1.1: The Bosch GBH 2400 Corded Rotary Hammer. This image shows the main unit of the rotary hammer, highlighting its compact design and ergonomic handle.
Ključne značilnosti:
- Znamka: Bosch
- vir energije: Električni na kabel
- Tip: Rotacijsko kladivo
- Številka modela: 2400 GBH
- Zahteva za baterijo: Baterije niso potrebne
- Hazardous Material: Not classified as dangerous or hazardous
2. Varnostna navodila
Vedno upoštevajte naslednje varnostne ukrepe, da preprečite električni udar, požar in hude poškodbe.
Splošna varnostna opozorila za električno orodje:
- Varnost na delovnem območju: Delovno območje naj bo čisto in dobro osvetljeno. Nered ali temna območja lahko povzročijo nesreče. Ne uporabljajte električnega orodja v eksplozivnih okoljih, na primer v prisotnosti vnetljivih tekočin, plinov ali prahu.
- Električna varnost: Vtiči električnega orodja morajo ustrezati vtičnici. Vtiča nikoli ne spreminjajte na noben način. Ne uporabljajte adapterjev za vtiče z ozemljenim električnim orodjem. Izogibajte se telesnemu stiku z ozemljenimi površinami.
- Osebna varnost: Always wear eye protection. Use hearing protection when operating the tool for extended periods. Wear a dust mask if working in dusty conditions. Dress properly; avoid loose clothing or jewelry.
- Uporaba in nega orodja: Ne silite električnega orodja. Uporabite pravilno električno orodje za vašo nalogo. Preden izvajate kakršne koli nastavitve, menjate pribor ali shranjujete električno orodje, ga izključite iz vtičnice.
- storitev: Vaše električno orodje naj servisira usposobljen serviser z uporabo samo enakih nadomestnih delov. Tako boste zagotovili varnost električnega orodja.
3. Nastavitev
Before operating the Bosch GBH 2400, ensure proper setup for safety and optimal performance.
Pritrditev pomožnega ročaja:
- Pomožni ročaj zrahljajte tako, da ga zavrtite v nasprotni smeri urinega kazalca.
- Slide the auxiliary handle onto the tool's neck until it is in a comfortable and secure position.
- Tighten the auxiliary handle by turning it clockwise. Ensure it is firmly secured before use.
Inserting and Removing Drill Bits/Chisels (SDS-plus System):
- Clean the shank of the drill bit/chisel and apply a thin layer of grease.
- Insert the drill bit/chisel into the tool holder by rotating it until it engages. Pull on the bit to ensure it is locked. The SDS-plus system allows for slight axial movement, which is normal.
- To remove, pull back the locking sleeve and pull the drill bit/chisel out of the tool holder.
4. Navodila za uporabo
Understand the different operating modes and how to use your rotary hammer effectively.
Stikalo za izbiro načina:
The GBH 2400 features a mode selector switch to choose between different functions:
- Kladivno vrtanje: Za udarno vrtanje v beton in zid.
- Vrtanje: Za vrtanje v les, kovino, keramiko in plastiko brez udarca.
- Dletenje: For light chiseling work (e.g., removing tiles, light demolition).
To change the operating mode, rotate the mode selector switch to the desired symbol. Ensure the tool is unplugged when changing modes to prevent accidental activation.
Zagon in zaustavitev:
- To start the tool, press the On/Off switch.
- Za zaustavitev orodja spustite stikalo za vklop/izklop.
- For continuous operation, press the On/Off switch and then press the lock-on button. To switch off, press the On/Off switch again.
Delovni nasveti:
- Vedno zavarujte obdelovanec.
- Apply moderate pressure; do not force the tool.
- For deep holes, periodically withdraw the drill bit to clear dust.
5. Vzdrževanje
Regular maintenance ensures the longevity and safe operation of your Bosch GBH 2400.
Čiščenje:
- Pred čiščenjem vedno odklopite orodje.
- Prezračevalne odprtine naj bodo čiste, da preprečite pregrevanje motorja.
- Clean the tool holder regularly to ensure proper function of the SDS-plus system.
Ogljikove ščetke:
The carbon brushes wear out over time. When they are worn, the tool may spark excessively or stop working. Have carbon brushes replaced by an authorized Bosch service center to ensure proper function and safety.
Mazanje:
The SDS-plus tool holder requires periodic lubrication. Apply a small amount of special grease to the shank of the drill bit before insertion to reduce wear and improve performance.
6. Odpravljanje težav
Za pogoste težave in njihove rešitve glejte ta razdelek.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Orodje se ne zažene. | Ni napajanja; okvarjeno stikalo; obrabljene ogljikove ščetke. | Check power connection. Test outlet. If switch or brushes are suspected, contact service. |
| Zmanjšana udarna moč. | Worn drill bit; insufficient lubrication of tool holder; internal wear. | Replace drill bit. Lubricate drill bit shank. Contact service for internal issues. |
| Prekomerno iskrenje pri motorju. | Worn carbon brushes; motor overload. | Have carbon brushes checked/replaced. Reduce load on the tool. |
| Drill bit not locking in holder. | Tool holder dirty; damaged locking mechanism. | Clean tool holder thoroughly. If damaged, contact service. |
7. Specifikacije
Detailed technical specifications for the Bosch GBH 2400 rotary hammer.
- Proizvajalec: Bosch
- Številka modela: GBH2400
- Teža artikla: 2.9 kilogramov
- Dimenzije izdelka: 37.7 x 21 x 8.3 cm
- Material: Kovina
- Vrsta vira energije: Električni na kabel
- voltage: 230 volta
- Wattage: 720 vatov
- Trenutna ocena: 3.04 Amps
- Vrsta svedra: Rotacijsko kladivo
- Vključene komponente: Chuck key, basic accessories
- Priložene baterije: št
- Potrebne baterije: št
- Prvi razpoložljivi datum: 7. januar 2010
8. Garancija in podpora
For warranty information, please refer to the warranty card included with your product or visit the official Bosch Professional website. For technical support, spare parts, or service inquiries, please contact your local authorized Bosch service center.
You can find contact details for Bosch service centers on the official Bosch Professional webspletno mesto: www.bosch-professional.com
