Intermatic EI230W

Intermatic EI230W Electronic Auto-Off Timer Instruction Manual

Model: EI230W | Znamka: Intermatic

1. Uvod

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Intermatic EI230W Electronic Auto-Off Timer. This device is designed to provide convenient, automatic shut-off for various electrical loads, enhancing energy efficiency and convenience in your home or office.

The EI230W timer offers silent operation and simple push-button controls for preset countdown times, making it an ideal replacement for standard single-pole switches.

2. Varnostne informacije

WARNING: RISK OF ELECTRIC SHOCK. This product requires installation by a qualified electrician or trained personnel. Always turn off power at the circuit breaker or fuse box before installation or servicing.

  • Pred namestitvijo ali uporabo tega izdelka preberite vsa navodila.
  • Do not use this timer with loads exceeding its electrical ratings.
  • Prepričajte se, da so vse električne povezave varne in v skladu z lokalnimi in nacionalnimi električnimi predpisi.
  • This device requires a neutral wire for proper operation. If a neutral wire is not present in your switch box, consult a qualified electrician.
  • Keep children away from electrical wiring.

3. Izdelek je končanview in funkcije

The Intermatic EI230W is an electronic in-wall timer designed for ease of use and silent operation. It features a clean white finish to blend with most decor.

Intermatic EI230W Electronic Auto-Off Timer with white faceplate

Figure 1: Intermatic EI230W Electronic Auto-Off Timer with faceplate.

Ključne značilnosti:

  • Preprosto delovanje: Easily select countdown times of 2, 4, 8, or 12 hours with a single button press. No complex programming is required.
  • Silent Control: Operates without audible clicking or humming, suitable for quiet environments.
  • Vsestranske aplikacije: Ideal for controlling indoor and outdoor lighting, bathroom fans, ventilation fans, and other appliances.
  • Enostavna namestitev: Designed to replace existing single-pole switches. Requires a neutral wire.
  • Bel zaključek: Aesthetically designed to integrate seamlessly with standard white wall plates.

4. Nastavitev in namestitev

Follow these steps carefully to install your Intermatic EI230W timer. If you are unsure about any step, consult a qualified electrician.

Potrebna orodja:

  • Izvijač (križni in ploščati)
  • Odstranjevalci žice
  • Električni trak
  • voltage Tester

Koraki namestitve:

  1. Izklopite napajanje: Locate the circuit breaker or fuse that controls the switch you are replacing. Turn off the power completely. Use a voltage tester to confirm that the power is off at the switch box.
  2. Odstranite obstoječe stikalo: Carefully remove the wall plate and unscrew the existing switch from the electrical box. Gently pull the switch out of the box.
  3. Prepoznajte žice:
    • LINE (Hot) Wire: Typically black, connected to the incoming power.
    • LOAD Wire: Typically black, connected to the light or appliance.
    • NEUTRAL Wire: Typically white. This timer requires a neutral wire.
    • GROUND Wire: Običajno gola bakrena ali zelena.
    Intermatic EI230W Electronic Auto-Off Timer with wiring diagram on the side

    Slika 2: stran view of the EI230W timer showing the wiring diagram.

  4. Wire the Timer: Connect the wires from the wall box to the corresponding wires on the EI230W timer using wire nuts.
    • Povežite ČRNA wire from the timer to the LINE (Hot) žica.
    • Povežite RDEČA wire from the timer to the NALOŽITEV žica.
    • Povežite BELA wire from the timer to the NEVTRALNO žica.
    • Povežite ZELENA wire from the timer to the TLA žica.
    Intermatic EI230W Electronic Auto-Off Timer without faceplate, front view

    Slika 3: Spredaj view of the EI230W timer without the faceplate, showing terminals.

  5. Namestite časovnik: Carefully push the wired timer back into the electrical box. Secure it with the provided screws.
  6. Namestite stensko ploščo: Attach the decorative wall plate (not included) over the timer.
  7. Obnovi moč: Ponovno vklopite napajanje na odklopniku ali v omarici z varovalkami.

Namestitveni video:

Video 1: Overview of Intermatic In-Wall Timers, including electronic models similar to the EI230W, demonstrating features like single-button operation, silent control, and ease of installation. This video highlights the simplicity of use and installation for electronic countdown timers.

5. Navodila za uporabo

The Intermatic EI230W timer is designed for straightforward operation with a single push-button interface.

Intermatic EI230W Electronic Auto-Off Timer with white faceplate, showing 2, 4, 8, 12 hour and HOLD options

Figure 4: Front panel of the EI230W timer with time selection buttons.

Nastavitev časovnika:

  1. Press the main button repeatedly to cycle through the available countdown times: 2 hours, 4 hours, 8 hours, 12 hours.
  2. The LED indicator next to the selected time will illuminate, confirming your choice.
  3. The connected load (light, fan, appliance) will turn on and remain on for the selected duration, then automatically turn off.

"HOLD" Function:

  • To keep the connected load on indefinitely, press the button until the "HOLD" indicator lights up. The load will remain on until you manually turn it off or select a countdown time.

Turning Off Manually:

  • If a countdown time is active or the timer is in "HOLD" mode, press the button until all LED indicators are off. This will turn off the connected load.

6. Vzdrževanje

The Intermatic EI230W Electronic Auto-Off Timer requires minimal maintenance.

  • Čiščenje: To clean the surface of the timer, use a soft, damp krpo. Ne uporabljajte abrazivnih čistil, topil in ne pršite neposredno na enoto.
  • Pregled: Periodically check the timer and wall plate for any signs of damage or loose connections. If any issues are found, turn off the power at the circuit breaker and consult a qualified electrician.

7. Odpravljanje težav

If you experience issues with your EI230W timer, refer to the following common problems and solutions:

TežavaMožen vzrokrešitev
Timer does not turn on or operate.No power to the switch box.
Nepravilno ožičenje.
Ohlapne povezave.
Preverite odklopnik ali varovalko.
Verify wiring connections according to the installation instructions. Ensure all wires are securely connected.
Load does not turn off after selected time.Timer is in "HOLD" mode.
Faulty timer unit.
Press the button until all LEDs are off to manually turn off the load, then re-select a countdown time.
Če težave ne odpravite, se obrnite na podporo strankam.
LED indikatorji ne svetijo.Časovnik ni pod napetostjo.
Okvarjena LED-dioda.
Preverite napajanje in ožičenje.
If the timer functions but LEDs do not, contact customer support.
Timer makes noise during operation.This electronic timer is designed for silent operation. Any noise indicates a potential issue.Turn off power immediately and consult a qualified electrician or contact customer support.

8. Specifikacije

  • Številka modela: EI230W
  • Znamka: Intermatic
  • barva: Bela
  • Dimenzije izdelka: 1.44"D x 1.68"Š x 4.13"V
  • Teža artikla: 0.34 funta (približno 5.4 unče)
  • Število nastavitev: 4 (2, 4, 8, 12 hours)
  • UPC: 078275095298
  • Proizvajalec: Intermatic
  • Odobritev: UL (Kanada in ZDA)
Intermatic EI230W Electronic Auto-Off Timer with dimensions labeled: 4.12 inches height, 1.44 inches depth, 1.68 inches width

Figure 5: Dimensions of the EI230W timer.

9. Garancija

Intermatic products are designed for durability and reliability. For specific warranty information regarding your EI230W Electronic Auto-Off Timer, please refer to the documentation included with your purchase or visit the official Intermatic website. Typically, Intermatic offers a limited warranty covering defects in materials and workmanship under normal use and service.

10. Podpora

For further assistance, technical support, or to inquire about replacement parts, please contact Intermatic customer service.

Povezani dokumenti - EI230W

Prejview Navodila za namestitev in uporabo elektronskega vgradnega odštevalnika časa Intermatic EI200
Podroben vodnik za namestitev in uporabo elektronskega vgradnega odštevalnika časa Intermatic EI200. Funkcije vključujejo časovno območje od 5 do 30 minut, način neprekinjenega zadrževanja in nazivne vrednosti za motorje splošnega namena 15 A, volframove žarnice z močjo 1000 W in motorje z močjo 1/4 KM. Vključuje informacije o garanciji.
Prejview Intermatic EI210 Elektronski stenski odštevalnik časa - Navodila za namestitev in uporabo
Celovit vodnik za elektronski vgradni odštevalnik časa Intermatic EI210, s podrobnimi funkcijami, koraki namestitve, načini delovanja (časovnik in zadrževanje) in informacijami o garanciji. Vključuje tehnične specifikacije in kontaktne podatke podjetja Intermatic Incorporated.
Prejview Intermatic EI205 Elektronski stenski odštevalnik časa: Navodila za namestitev in uporabo
Celovit vodnik za namestitev in uporabo elektronskega stenskega odštevalnika časa Intermatic EI205. Zajema funkcije, nazivne vrednosti, namestitev po korakih, načine delovanja in 1-letno omejeno garancijo. Idealen za nadzor razsvetljave in porabe s časovnim izklopom.
Prejview Intermatic EI220 Elektronski stenski odštevalnik časa: Navodila za namestitev in uporabo
Comprehensive guide for installing and operating the Intermatic EI220 electronic in-wall countdown timer. Covers features, electrical ratings, step-by-step installation, operational modes (Timer and Hold), and warranty information.
Prejview Intermatic EI200 Elektronski stenski odštevalnik časa - Navodila za namestitev in uporabo
Podroben vodnik za elektronski vgradni odštevalnik časa Intermatic EI200. Zajema funkcije, nazivne vrednosti, korake namestitve, načine delovanja (način časovnika, način zadrževanja) in 1-letno omejeno garancijo. Vključuje diagrame ožičenja in varnostna opozorila.
Prejview Navodila za namestitev in programiranje časovnega stikala za osvetlitev Intermatic EJ341C/EJ343C
Podrobna navodila za namestitev in programiranje časovnih stikal za razsvetljavo Intermatic EJ341C (enopolno) in EJ343C (tripolno). Zajemajo nastavitev, upravljanje, načine programiranja, odpravljanje težav in specifikacije.