Konec izdelkaview
The Weiser GA531 T3 SMTK4 MS 6LR1 Troy Entry Knob is a bright brass finished door knob designed for entry doors, providing both security and aesthetic appeal. It features a SmartKey cylinder for enhanced security and easy rekeying.
Slika: Bližnji posnetek view of the Weiser Troy Entry Knob, showcasing its bright brass finish and the keyhole of the SmartKey cylinder.
Ključne značilnosti
- Bright brass finish for a classic aesthetic.
- Equipped with a SmartKey cylinder, eliminating traditional pins and springs for enhanced security.
- Allows for easy rekeying in three simple steps using the included rekeying tool.
- Designed to fit standard doors with an adjustable backset of 2-3/8 inches or 2-3/4 inches.
- Part of the Weiser Welcome Home Series, ensuring quality and compatibility.
Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- Troy Entry Knob (Interior and Exterior halves)
- Zaklepni mehanizem
- Udarna plošča
- Montažni vijaki
- Rekeying Tool
- Ključi
Navodila za namestitev
This section provides general instructions for installing the Weiser Troy Entry Knob. For detailed visual guides, refer to the manufacturer's official installation videos or diagrams.
1. Pripravite vrata
Ensure your door is properly bored for a standard door knob installation. The knob fits standard doors and has an adjustable bracket for 2-3/8'' or 2-3/4'' backsets.
2. Namestite zapah
Insert the latch into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with screws.
3. Install the Knobs
Align the posts of the exterior knob with the holes in the latch. Slide the exterior knob into place. Then, align the interior knob and secure it to the exterior knob using the provided screws.
4. Namestite zaporno ploščo
On the door frame, align and install the strike plate where the latch bolt will engage when the door is closed. Secure with screws.
Rekeying the Lock (SmartKey Cylinder)
The SmartKey cylinder allows you to rekey your lock to a new key in three easy steps. This is useful if you lose a key or want to match your lock to other SmartKey locks.
- Insert your functioning key fully into the cylinder and turn it 90 degrees clockwise.
- Insert the SmartKey rekeying tool fully into the SmartKey hole. Apply firm pressure and remove the rekeying tool.
- Remove your functioning key. Insert your new key fully into the cylinder and turn it 180 degrees counter-clockwise. Your lock is now rekeyed.
Navodila za uporabo
The Weiser Troy Entry Knob operates as a standard keyed entry knob. To lock the door from the exterior, use the key. To lock from the interior, rotate the turn-button on the interior knob. To unlock, use the key from the exterior or rotate the turn-button from the interior.
The SmartKey cylinder provides pick-resistance and bump-resistance for enhanced security.
Nega in vzdrževanje
To maintain the bright brass finish and ensure smooth operation of your Weiser Troy Entry Knob, follow these guidelines:
- Čiščenje: Clean the knob with a soft, damp cloth. Avoid abrasive cleaners, solvents, or polishes that may damage the finish.
- Mazanje: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway to ensure smooth key insertion and turning. Do not use oil-based lubricants as they can attract dirt.
- Pregled: Redno preverjajte trdnost vseh vijakov in komponent. Privijte vse ohlapne vijake, da preprečite tresenje ali okvaro.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Key does not turn or is difficult to insert. | Debris in keyway, worn key, or lack of lubrication. | Clean keyway with compressed air. Lubricate with graphite. Try a new key if available. |
| Gumb je ohlapen ali majav. | Pritrdilni vijaki so ohlapni. | Tighten the mounting screws on the interior side of the knob. |
| Latch bolt does not extend or retract smoothly. | Misalignment, debris, or worn latch. | Check for proper alignment of the latch and strike plate. Clean any debris. Lubricate the latch mechanism. |
| Cannot rekey the lock. | Incorrect key insertion, rekeying tool not fully inserted, or wrong key. | Ensure functioning key is fully inserted and turned 90 degrees. Insert rekeying tool firmly and completely. Use the correct new key. |
Specifikacije izdelka
| Številka modela | GA531 T3 SMTK4 MS 6LR1 |
| Znamka | Weiser |
| Material | Medenina |
| Barva/končna obdelava | Brass/Bright Brass (Polished) |
| Vrsta ključavnice | Key Lock (SmartKey Cylinder) |
| Nastavljiv hrbet | 2-3/8 palca ali 2-3/4 palca |
| Teža predmeta | 1.25 funta (približno) |
| Dimenzije izdelka | 4.56 x 2.99 x 8.94 palcev (približno) |
| Vključene komponente | Knob, Lock, Rekeying Tool |
| Posebne lastnosti | Enostavna namestitev, trpežna |
Garancija in podpora
Weiser products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty to the original residential user. For specific warranty details, claims, or technical support, please refer to the official Weiser webali se obrnite na njihov oddelek za pomoč uporabnikom.
Za dodatno pomoč obiščite Weiser Lock official webmesto.
