Intermatic HB800RCH 15-AMP 7-Day Outdoor Plugin Digital Timer Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, programming, and operation of your Intermatic HB800RCH 15-AMP 7-Day Outdoor Plugin Digital Timer. This device is designed to automate the control of electrical loads outdoors, offering convenience and energy efficiency through programmable on/off cycles and astronomic features.

2. Varnostne informacije

Please read and understand all safety instructions before installing or operating this timer. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the timer is plugged into a grounded outdoor receptacle protected by a Ground Fault Circuit Interrupter (GFCI).
• Do not immerse the timer in water or expose it to direct water spray.
• Ne prekoračite največje električne nazivne napetosti 15 Amps.
• Always unplug the timer from the power source before performing any maintenance or cleaning.
• Otroke hranite stran od časovnika in priključenih naprav.
• Ne uporabljajte podaljškov, ki niso namenjeni za uporabo na prostem.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• Intermatic HB800RCH Digital Timer Unit
• Navodila za uporabo

4. Značilnosti izdelka

• Outdoor digital timer functionality
• Up to 14 programmable ON/OFF events per week
• 15-Amp capacity for various outdoor applications
• Astronomic feature: automatically adjusts to local sunrise/sunset times
• Two grounded receptacles for connecting devices
• Battery backup for settings retention during power outages

Slika 1: Spredaj view of the Intermatic HB800RCH Digital Timer, showing the digital display, control buttons (OK, MODE, PROG, ON/OFF), and the manual override dial. The timer is gray with a black power cord and plug.

Slika 2: Spodaj view of the Intermatic HB800RCH Digital Timer, illustrating the two grounded electrical receptacles. These outlets are recessed for weather protection.

5. Nastavitev

1. Začetni vklop: Plug the timer into a standard 120V AC outdoor GFCI-protected outlet. The display will illuminate.
2. Aktivacija baterije: The timer includes a battery backup. Ensure it is active to retain settings during power outages. If the display is blank or dim, allow the timer to charge for a few minutes.
3. Ponastavitev časovnika: If the display shows erratic characters or you wish to clear all previous settings, locate the small recessed reset button (often labeled 'R' or 'RESET') and press it firmly with a non-metallic pointed object (e.g., a pen tip). The display will reset to 12:00 AM.
4. Nastavitev trenutnega časa in dneva:
   • Pritisnite NAČIN button until "SET CLOCK" appears.
   • Uporabite OK button to select the hour, then use the rotary dial (or UP/DOWN buttons if present) to adjust the hour. Press OK za potrditev.
   • Ponovite za minute in AM/PM.
   • Uporabite OK button to select the day of the week, then use the rotary dial to adjust. Press OK za potrditev.
   • Pritisnite NAČIN za izhod iz nastavitve ure.
5. Setting Current Date (for Astronomic Feature):
   • Pritisnite NAČIN gumb, dokler se ne prikaže napis »NASTAVI DATUM«.
   • Uporabite OK button to select the year, then use the rotary dial to adjust. Press OK za potrditev.
   • Ponovite za mesec in dan.
   • Pritisnite NAČIN to exit date setting.
6. Setting Location for Astronomic Feature:
   • Pritisnite NAČIN button until "SET LOCATION" appears.
   • Use the rotary dial to select your state/region. Press OK.
   • Further refine your location if prompted (e.g., North, Central, South within a state). Press OK.
   • Pritisnite NAČIN to exit location setting.
7. Prilagoditev poletnega časa (DST): The timer is designed to automatically adjust for DST. Verify the setting under the "SET DST" menu option if available, or refer to the specific instructions for your model.

6. Navodila za uporabo (programiranje)

The HB800RCH timer allows for up to 14 ON/OFF events (7 ON, 7 OFF) per week. Each event can be set for specific days or groups of days.

1. Vstop v programski način: Pritisnite PROG button. The display will show "PROG 1 ON".
2. Setting ON Time:
   • With "PROG 1 ON" displayed, press OK. The hour will flash.
   • Use the rotary dial to adjust the hour. Press OK.
   • Adjust minutes and AM/PM similarly. Press OK.
   • Day Selection: The display will show the days of the week. Use the rotary dial to select the desired days for this ON event. Options typically include:
     • PO TO SRE ČET PET SOB NE (Vsak dan)
     • PO TO SRE ČET PET (Delovniki)
     • SO NE (vikendi)
     • Individual days (MO, TU, etc.)
     Pritisnite OK za potrditev izbire dneva.
3. Setting OFF Time:
   • After setting the ON time for PROG 1, the display will automatically advance to "PROG 1 OFF". Press OK.
   • Adjust the hour, minutes, AM/PM, and day selection for the OFF event using the same method as the ON time. Ensure the OFF time is appropriate for the ON time.
   • Pritisnite OK za potrditev.
4. Programming Additional Events: After setting PROG 1 OFF, the display will advance to "PROG 2 ON". Repeat steps 2 and 3 for up to 7 ON/OFF programs.
5. Izhod iz programskega načina: Pritisnite NAČIN button repeatedly until the current time is displayed, or wait for the timer to automatically exit program mode after a period of inactivity.
6. Astronomic ON/OFF Events: To use the astronomic feature, select "DAWN" or "DUSK" instead of a specific time when setting an ON or OFF event. The timer will automatically calculate these times based on your set location and date. You can also set an offset (e.g., DUSK + 30 minutes).
7. Ročna preglasitev: To temporarily turn the connected devices ON or OFF without affecting the programmed schedule, press the VKLOP/IZKLOP button. The display will indicate "ON" or "OFF" and the timer will revert to the schedule at the next programmed event.

7. Vzdrževanje

The Intermatic HB800RCH timer requires minimal maintenance.

• Čiščenje: Obrišite zunanjost z mehko damp cloth. Do not use abrasive cleaners or solvents. Ensure the timer is unplugged before cleaning.
• Varnostno kopiranje baterije: The internal battery is designed to hold settings for an extended period (e.g., 3 months) during power outages. If the timer frequently loses settings after short power interruptions, the battery may need replacement. Refer to the manufacturer's guidelines for battery replacement, or contact customer support.
• Shranjevanje: If storing the timer for an extended period, ensure it is clean and dry. Store in a cool, dry place.

8. Odpravljanje težav

9. Specifikacije

• Model: HB800RCH
• Znamka: Intermatic
• Električna ocena: 120 VAC, 60 Hz, 15 Amps Resistive, 1800 Watts
• Number of ON/OFF Events: Up to 14 per week (7 ON, 7 OFF)
• Posode: 2 ozemljene vtičnice
• Material: Plastika
• barva: Črna
• Teža artikla: Približno 1 funt (454 gramov)
• Dimenzije: Približno 8.1 x 6.9 x 3.8 cm (dimenzije paketa)
• Velikost zaslona: 2 palcev
• UPC: 078275111400

10. Garancija in podpora

Garancija: This Intermatic product comes with a Limited Lifetime Warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Intermatic webmesto.

Podpora strankam: For technical assistance, troubleshooting, or warranty claims, please contact Intermatic customer support. Contact information can typically be found on the manufacturer's webspletnem mestu ali na embalaži izdelka.

Lahko obiščete Trgovina Intermatic na Amazonu za več informacij o izdelku.