1. Izdelek je končanview
The Metabo WEA 14-125 Plus is a powerful 125 mm angle grinder designed for various grinding and cutting applications. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.
This image displays the Metabo WEA 14-125 Plus Angle Grinder. It features a dark green and black body with a silver-colored gear housing. A red side handle with the 'metabo' logo is attached, and a grinding wheel is visible under the protective guard. The power cord extends from the rear of the tool.
2. Varnostna navodila
Vedno upoštevajte naslednje varnostne ukrepe, da preprečite električni udar, požar in hude poškodbe.
- Varnost na delovnem območju: Delovno območje naj bo čisto in dobro osvetljeno. Nered ali temna območja lahko povzročijo nesreče. Ne uporabljajte električnega orodja v eksplozivnih okoljih, na primer v prisotnosti vnetljivih tekočin, plinov ali prahu.
- Električna varnost: Vtiči električnega orodja morajo ustrezati vtičnici. Vtiča nikoli ne spreminjajte. Izogibajte se telesnemu stiku z ozemljenimi površinami, kot so cevi, radiatorji, štedilniki in hladilniki.
- Osebna varnost: Always wear eye protection. Use hearing protection when operating the tool. Wear a dust mask if operations create dust. Do not overreach. Keep proper footing and balance at all times.
- Uporaba in nega električnega orodja: Ne silite električnega orodja. Uporabite pravilno električno orodje za vašo nalogo. Preden izvajate kakršne koli nastavitve, menjate pribor ali shranjujete električno orodje, ga izključite iz vtičnice.
- Posebna varnost kotnih brusilnikov:
- Vedno uporabljajte zaščitni pokrov, ki je priložen orodju.
- Ensure the grinding wheel is correctly mounted and tightened before use.
- Ne uporabljajte poškodovane ali napačne dodatne opreme.
- Pustite, da orodje doseže polno hitrost, preden ga nanesete na obdelovanec.
- Zavedajte se povratnega udarca in kako se mu izogniti.
3. Nastavitev
Before operating the angle grinder, ensure it is properly set up.
- Razpakiranje: Carefully remove the angle grinder and all accessories from the packaging. Inspect for any damage. Do not use the tool if any part is damaged.
- Pritrditev stranskega ročaja: The side handle can be screwed into either the left or right side of the gear housing, depending on user preference and application. Ensure it is securely tightened.
Refer to the product image for the typical placement of the side handle.
- Montaža brusilnega kolesa:
- Prepričajte se, da je orodje izklopljeno iz vira napajanja.
- Pritisnite gumb za zaklepanje vretena, da pritrdite vreteno.
- Namestite notranjo prirobnico na vreteno.
- Position the grinding wheel (e.g., 125 mm abrasive wheel, Type 27) onto the inner flange, ensuring it sits flush.
- Privijte zunanjo prirobnico (clamp(matico) na vreteno.
- Use the spanner wrench to firmly tighten the outer flange while holding the spindle lock.
- Prilagajanje zaščite: The protective guard must always be used. Adjust its position to provide maximum protection for the operator, directing sparks and debris away from the user. Loosen the guard's clampPrivijte vijak, zavrtite ščitnik v želeni položaj in nato trdno privijte vijak.
4. Navodila za uporabo
Za varno in učinkovito delovanje sledite tem korakom.
- Vklop/izklop:
- To switch on, slide the switch forward. For continuous operation, press the front part of the switch down until it locks.
- To switch off, release the switch. If locked for continuous operation, press the rear part of the switch to release it.
- Brušenje:
- Orodje trdno držite z obema rokama.
- Allow the grinding wheel to reach full speed before contacting the workpiece.
- Apply light, even pressure. Do not press too hard, as this can reduce wheel life and motor efficiency.
- Maintain an angle of approximately 15-30 degrees between the grinding wheel and the workpiece surface for optimal material removal.
- Rezanje:
- For cutting, use appropriate cutting discs and ensure the guard is correctly positioned.
- Hold the tool firmly. Make straight cuts without tilting the disc.
- Do not apply side pressure to the cutting disc, as this can cause it to bind or break.
- Prepričajte se, da je obdelovanec varno clampizd.
5. Vzdrževanje
Redno vzdrževanje zagotavlja dolgo življenjsko dobo in varno delovanje vašega kotnega brusilnika Metabo.
- Čiščenje: Regularly clean the ventilation slots to prevent overheating. Use a soft brush or compressed air. Do not use water or solvents.
- Ogljikove ščetke: This tool uses carbon brushes. If the motor sparks excessively or the tool loses power, the carbon brushes may need replacement. This should ideally be performed by a qualified service technician.
- Napajalni kabel: Inspect the power cord regularly for damage. If damaged, have it replaced by a qualified electrician to avoid electrical hazards.
- Splošni pregled: Periodically check all screws and fasteners for tightness. Ensure the guard and side handle are securely attached.
6. Odpravljanje težav
Za pogoste težave in njihove rešitve glejte ta razdelek.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Orodje se ne zažene. | Ni napajanja; poškodovan napajalni kabel; okvarjeno stikalo. | Check power outlet and cord. If cord or switch is damaged, have it repaired by a qualified technician. |
| Prekomerno iskrenje pri motorju. | Obrabljene ogljikove ščetke. | Have carbon brushes inspected and replaced by a service technician. |
| Orodje se pregreva. | Zamašene prezračevalne reže; stalna velika obremenitev. | Clean ventilation slots. Reduce load and allow the tool to cool. |
| Grinding wheel vibrates excessively. | Improperly mounted wheel; damaged wheel; worn flanges. | Ensure wheel is correctly mounted and tightened. Replace damaged wheel or flanges. |
7. Tehnične specifikacije
Key technical data for the Metabo WEA 14-125 Plus Angle Grinder.
- Znamka: Metabo
- Številka modela: 601105000
- moč: 1400 vatov
- voltage: 230 volta
- Premer brusilnega kolesa: 125 mm
- Navoj vretena: M 14
- Mere izdelka (D x Š x V): 13 x 37.2 x 12.4 cm
- Teža: 2000 gramov (2 kg)
- vir energije: Električni na kabel
- Material: Plastika
- barva: zelena
8. Garancija in podpora
For warranty information, service, or technical support, please refer to the documentation provided with your purchase or contact Metabo customer service directly. Keep your proof of purchase for warranty claims.
You can find more information on the official Metabo webspletno mesto: www.metabo.com
