Priročniki+

Intermatic T104R3

Intermatic T104R3 Time Switch User Manual

Model: T104R3 | Brand: Intermatic

1. Uvod

The Intermatic T104R3 is a robust mechanical time switch engineered for reliable operation in various settings, including commercial, industrial, and residential environments. This device allows for precise scheduling of electrical loads, offering up to 12 ON/OFF operations per day. Its durable construction and high motor load ratings ensure long-lasting performance. This manual provides essential information for safe installation, operation, and maintenance of your time switch.

2. Varnostne informacije

OPOZORILO: NEVARNOST ELEKTRIČNEGA UDARA

  • Always turn power off at the main panel before servicing this switch or any equipment it controls.
  • Use copper conductors only for wiring connections.
  • Ensure the safety guard is reinstalled after completing all wiring.
  • This portion of the safety guard may be removed if necessary to fit specific panel applications.

3. Izdelek je končanview

Intermatic T104R3 Time Switch with internal components visible, showing the yellow timing dial, manual override lever, and safety warning label.

Slika 1: Notranji view of the Intermatic T104R3 Time Switch, highlighting the timing dial and manual override switch.

The Intermatic T104R3 features a prominent yellow timing dial with markings for AM/PM hours. Two adjustable trippers (ON and OFF) are used to program the desired operation schedule. Below the dial, a manual override lever allows for temporary control of the connected load, bypassing the programmed schedule. A safety guard covers the wiring terminals, emphasizing the importance of electrical safety.

4. Nastavitev

4.1. Namestitev

  1. Odklop napajanja: Before beginning any installation, ensure the main power supply to the circuit is completely turned off at the breaker panel. Verify with a voltage tester.
  2. Montaža: Securely mount the time switch enclosure to a suitable surface using appropriate hardware.
  3. Ožičenje: Connect the electrical wiring to the designated terminals. Refer to the wiring diagram provided inside the enclosure or in the full product manual for specific connections. Ensure only copper conductors are used.
  4. Varnostna zaščita: After all wiring is complete and secure, reinstall the safety guard over the terminals.
  5. Obnovitev napajanja: Once installation is complete and verified, restore power at the main panel.

4.2. Začetna nastavitev časa

  1. Vrtenje številčnice: Grasp the outer edge of the yellow timing dial.
  2. Nastavi trenutni čas: Rotate the dial clockwise until the current time of day aligns with the stationary time pointer (usually located at the top of the dial). Ensure to differentiate between AM and PM hours.

5. Navodila za uporabo

5.1. Setting ON/OFF Operations

The T104R3 uses ON and OFF trippers to program the schedule. Each tripper represents a specific time for the connected load to turn ON or OFF.

  1. Attach Trippers: Slide the ON tripper (typically silver) onto the outer edge of the yellow dial at the desired ON time. Slide the OFF tripper (typically gold) onto the dial at the desired OFF time.
  2. Secure Trippers: Ensure the trippers are firmly seated on the dial.
  3. Več operacij: The time switch supports up to 12 ON/OFF operations per day. Additional trippers can be purchased separately if more than one ON/OFF cycle is required.
  4. Minimalni čas: The minimum ON or OFF time for any operation is 1 hour.

5.2. Ročni preglas

The manual override lever, located below the timing dial, allows you to temporarily control the connected load independently of the programmed schedule.

  • Položaj IZKLOP: Moves the lever to the

    Povezani dokumenti - T104R3

    Prejview Navodila za namestitev Intermatic ohišja časovnega stikala, odpornega proti dežju, iz vse plastike
    Podroben vodnik za namestitev v celoti plastičnega ohišja za časovno stikalo Intermatic, odpornega proti dežju, montaža ohišja, priključki cevi in ​​ozemljitev v skladu z nacionalnim električnim predpisom.
    Prejview Časovno stikalo Intermatic ET2745: Navodila za namestitev in nastavitev 4-krožnega elektronskega časovnika s 365/7 dnevi
    Podrobna navodila za namestitev in nastavitev 4-krožnega elektronskega 365/7-dnevnega časovnega stikala Intermatic serije ET2745, ki zajemajo konfiguracijo, programiranje in odpravljanje težav za avtomatizirano krmiljenje obremenitve.
    Prejview Intermatic T7402B Priročnik za sedemdnevno stikalo s številčnico
    Podrobna navodila in specifikacije za sedemdnevno stikalno uro Intermatic T7402B, vključno z ožičenjem, programiranjem in navodili za uporabo.
    Prejview Intermatic ET2705 Series Electronic 7-Day Time Switch Installation and Setup Guide
    Comprehensive installation, setup, and programming guide for the Intermatic ET2705, ET2705CR, and ET2705CP Electronic 1-Circuit 7-Day Time Switches. Covers wiring, initial setup, scheduling, DST configuration, USB data transfer, and troubleshooting.
    Prejview Intermatic GM40AVE Series Electronic Commercial Time Switch Installation and Operation Manual
    Comprehensive installation, operation, and troubleshooting guide for the Intermatic GM40AVE Series General Purpose Electronic Commercial Time Switches. Includes electrical ratings, wiring diagrams, application details, and warranty information. Source URL: http://waterheatertimer.org/Intermatic-timers-and-manuals.html#GM40AVE
    Prejview Navodila za uporabo elektronskega časovnega stikala Intermatic Digi 42 serije
    Navodila za uporabo elektronskih časovnih stikal Intermatic Digi serije 42, ki zajemajo namestitev, programiranje in odpravljanje težav za 24-urni in 7-dnevni urnik.