Navodila za uporabo elegantnega reflektorja RAB Lighting LFP16A

1. Izdelek je končanview

The RAB Lighting LFP16A Sleek Floodlight is designed for outdoor illumination, providing efficient and durable lighting. This fixture accommodates a PAR16 type bulb and features a robust die-cast aluminum housing with a powder-coated finish for enhanced durability and weather resistance.

Ključne značilnosti:

• Designed for 60W PAR16 bulbs, delivering 650 lumens output (bulb not included).
• Durable die-cast aluminum housing with a powder-coated finish.
• Gasket and O-ring seals provide resistance against weather elements.
• Integrated shield helps reduce glare.
• Equipped with a 1/2" NPS threaded arm for secure mounting and a locking swivel for adjustable positioning.

Figure 1: RAB Lighting LFP16A Sleek Floodlight. This image shows the floodlight fixture with its threaded arm and wiring, highlighting its compact and durable design.

2. Varnostne informacije

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Električna varnost: Always disconnect power at the circuit breaker or fuse box before wiring or servicing the fixture.
• Kvalificirani električar: Namestitev mora opraviti usposobljen električar v skladu z vsemi lokalnimi in nacionalnimi električnimi predpisi.
• Ozemljitev: Prepričajte se, da je svetilka pravilno ozemljena, da se izognete morebitnim električnim nevarnostim.
• Vrsta žarnice: Use only PAR16 type bulbs with a maximum wattag60 W. Preseganje največje dovoljene močitage can cause overheating and damage to the fixture.
• Mokra lokacija: This fixture is suitable for wet locations. Ensure all connections are properly sealed and waterproofed during installation.
• Temperatura: Do not install near combustible materials or surfaces that may be affected by heat.

3. Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• RAB Lighting LFP16A Sleek Floodlight Fixture (1)
• Navodila za uporabo (1)

Note: Light bulb and wire connectors are not included and must be purchased separately.

4. Nastavitev in namestitev

This floodlight is designed for wall mounting and features a 1/2" NPS threaded arm for secure attachment to a junction box or mounting accessory. Follow these steps for proper installation:

1. Pripravite se na namestitev:
   • Preden začnete z električnimi deli, izklopite napajanje na odklopniku.
   • Gather necessary tools: screwdriver, wire strippers, electrical tape, silicone sealant (for waterproofing).
2. Namestite napeljavo:
   • Thread the 1/2" NPS arm of the floodlight into a compatible outdoor junction box or mounting plate. Ensure a tight and secure connection.
   • Use the locking swivel to adjust the initial angle of the fixture.
   

   Figure 2: Detail of the 1/2" NPS threaded arm and 180-degree adjustable swivel. This illustrates the mounting mechanism and flexibility of the floodlight.
3. Žične povezave:
   • Connect the black wire from the fixture to the hot (black) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (white) wire from the power supply.
   • Connect the bare copper or green wire from the fixture to the ground wire from the power supply.
   • Secure all connections with appropriate wire connectors and electrical tape. For outdoor installations, consider using silicone-filled wire nuts for added moisture protection.
4. Namestite žarnico:
   • Carefully insert a PAR16 bulb (max 60W) into the fixture socket. Do not overtighten.
5. Seal and Test:
   • Ensure all connections are secure and the fixture is properly sealed against moisture. Apply silicone sealant around the mounting base if necessary.
   • Restore power at the circuit breaker and test the floodlight's operation.

5. Navodila za uporabo

Once installed and powered, the RAB Lighting LFP16A Floodlight operates by the control of the circuit it is connected to (e.g., a wall switch, timer, or photocell). There are no direct controls on the fixture itself.

• Prilagoditev smeri svetlobe: The fixture features a locking swivel arm. To adjust the light direction, loosen the locking nut on the swivel, position the floodlight as desired, and then tighten the locking nut securely.
• Zmanjšanje bleščanja: The built-in shield is designed to minimize glare, directing light effectively to the intended area.

Slika 3: Nprample of the LFP16A floodlight used in a landscape setting, demonstrating its illumination capabilities.

6. Vzdrževanje

Redno vzdrževanje zagotavlja optimalno delovanje in dolgo življenjsko dobo vašega reflektorja.

• Čiščenje: Zunanjost naprave občasno očistite z mehko krpo,amp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish. Ensure power is off before cleaning.
• Zamenjava žarnice:
  1. Izklopite napajanje svetilke na odklopniku.
  2. Allow the old bulb to cool completely before handling.
  3. Carefully unscrew and remove the old PAR16 bulb.
  4. Insert a new PAR16 bulb (max 60W) into the socket, ensuring it is seated correctly.
  5. Obnovite napajanje in preizkusite novo žarnico.
• Pregled: Annually inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly.

7. Odpravljanje težav

8. Specifikacije

9. Garancija in podpora

The RAB Lighting LFP16A Sleek Floodlight comes with a 1-letna garancija proizvajalca od datuma nakupa. Ta garancija pokriva napake v materialu in izdelavi pri normalni uporabi.

For warranty claims, technical support, or further assistance, please contact RAB Lighting customer service. Refer to the official RAB Lighting webspletno mesto za najnovejše kontaktne podatke.

Proizvajalec: RAB razsvetljava

Webspletno mesto: www.rablighting.com (Npramppovezava, dejanska povezava se lahko razlikuje)