Uvod
This manual provides instructions for the installation, operation, and maintenance of the Linear Multi-Code Keypad Transmitter, model 420001. This wireless keypad is designed for use with Multi-Code Receivers to control access to garage doors or gates.
Konec izdelkaview
The Linear Multi-Code Keypad Transmitter 420001 is a 12-button alphanumeric keypad. It operates on a 300 MHz frequency and features 10 dip switches for programming. Its weatherproof casing ensures durability for outdoor use.
Slika: spredaj view of the Linear Multi-Code Keypad Transmitter 420001, showing the 12-button alphanumeric keypad and the "MULTI-CODE" branding at the top.
Nastavitev in namestitev
Namestitev baterije
The keypad requires one 9V alkaline battery (not included). To install:
- Odprite tipkovnico casing.
- Connect the 9V battery to the battery clip.
- Place the battery securely within the compartment.
- Zaprite tipkovnico casing, ensuring it is sealed properly for weather resistance.
Montaža
The keypad is designed for screw-in installation and mounts with two screws.
- Choose a suitable location for mounting, ensuring it is within range of your Multi-Code Receiver.
- Mark the positions for the two mounting screws.
- Po potrebi izvrtajte vodilne luknje.
- Secure the keypad to the surface using appropriate screws.
Programiranje tipkovnice
This keypad uses 10 dip switches for programming. The code is entered directly through the keypad, eliminating the need to manually adjust physical dip switches on the unit itself.
- Locate the dip switch settings on your Multi-Code Receiver or existing remote. This will be a sequence of 10 switches, each set to ON, OFF, or MIDDLE (if applicable).
- On the 420001 keypad, enter the 10-digit code corresponding to your receiver's dip switch settings. Refer to the keypad's internal instructions for specific key presses to represent ON, OFF, or MIDDLE positions.
- Press the "ACCESS" button to save the code.
- Test the keypad to ensure it operates your garage door or gate opener.
Opomba: Programming typically takes less than 2 minutes. Ensure the keypad is within operational range of the receiver during testing.
Navodila za uporabo
To operate your garage door or gate using the Linear Multi-Code Keypad Transmitter:
- Enter your programmed 10-digit access code using the alphanumeric buttons.
- Press the "ACCESS" button.
- The LED indicator will illuminate, and your Multi-Code Receiver should activate, opening or closing your garage door or gate.
If the door or gate does not respond, verify your code and ensure the keypad is within effective range of the receiver.
Vzdrževanje
- Zamenjava baterije: When the keypad's performance degrades or the LED indicator fails to light, replace the 9V battery. Follow the battery installation steps.
- Čiščenje: Clean the keypad's exterior with a soft, damp krpo. Izogibajte se abrazivnim čistilom ali topilom.
- Odpornost na vremenske vplive: The keypad features a weatherproof casing. Ensure the casing is properly closed and sealed after any internal access (e.g., battery replacement) to maintain its weather-resistant properties.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Keypad does not respond or works intermittently. |
|
|
| LED indikator ne sveti. | Prazna ali nepravilno nameščena baterija. | Check battery connection or replace the 9V battery. |
| Keypad does not program correctly. | Incorrect dip switch settings entered. | Double-check the 10 dip switch settings from your receiver and re-enter the code carefully. |
Specifikacije
| Številka modela | 420001 |
| Znamka | Linearno |
| Pogostost | 300 MHz |
| Number of Dip Switches | 10 |
| Vir napajanja | 1 x 9V alkalna baterija (ni priložena) |
| Vrsta namestitve | Privijanje |
| Dimenzije izdelka | 6.75 x 1.5 x 3 palcev |
| Teža predmeta | 4 unč |
| Material | Plastika |
| barva | Bež |
| Skladnost | FCC |
Garancija in podpora
Za informacije o garanciji ali tehnično podporo se obrnite na uradno spletno stran proizvajalca webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Za uveljavljanje garancije shranite račun.
Proizvajalec: Linearno
