Socket Mobile SL0707-078

Socket Mobile SL0707-078 Ruggedized Serial I/O PC Card User Manual

Model: SL0707-078

1. Uvod

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Socket Mobile SL0707-078 Ruggedized Serial I/O PC Card. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Izdelek je končanview

The Socket Mobile SL0707-078 is a Ruggedized Serial I/O PC Card designed to add a high-speed RS-232 port to your mobile computer. It enables connectivity with a wide range of serial devices, including fax/modems, digital cameras, bar code scanners, monitoring and control systems, data collection gear, lab equipment, and GPS receivers. The card features a robust design with a 17-inch cable terminating in a male DB-9 connector.

Socket Mobile SL0707-078 Ruggedized Serial I/O PC Card

Figure 1: Socket Mobile SL0707-078 Ruggedized Serial I/O PC Card with attached DB-9 cable.

3. Ključne značilnosti

4. Sistemske zahteve

To use the Socket Mobile SL0707-078 PC Card, your mobile computer must meet the following requirements:

5. Nastavitev in namestitev

Follow these steps to install your Socket Mobile SL0707-078 PC Card:

  1. Insert the PC Card: Carefully insert the Socket Mobile SL0707-078 PC Card into an available PC Card slot on your mobile computer. Ensure it is fully seated.
  2. Namestitev gonilnika:
    • Upon insertion, your operating system may automatically detect new hardware and prompt for driver installation.
    • Insert the driver CD (if provided) or download the latest drivers and Hi-Speed COM Tools from the Socket Mobile official webmesto.
    • Sledite navodilom na zaslonu, da dokončate namestitev gonilnika. Po potrebi znova zaženite računalnik.
  3. Priključite serijsko napravo: Connect your serial device (e.g., bar code scanner, GPS receiver) to the DB-9 connector on the ruggedized cable of the PC Card.
  4. Preverite namestitev:
    • Open your computer's Device Manager (e.g., in Windows, right-click "My Computer" or "This PC", select "Manage", then "Device Manager").
    • Expand the "Ports (COM & LPT)" section. You should see a new COM port listed for the Socket Mobile Serial I/O PC Card.
    • Note the assigned COM port number for use with your serial applications.

Important: Always install the correct drivers for your operating system to ensure proper functionality and optimal performance.

6. Navodila za uporabo

Once the drivers are installed and the card is recognized, you can begin using the serial port:

  1. Accessing the COM Port: Your serial application (e.g., terminal emulator, data collection software) will require you to select the correct COM port number assigned to the Socket Mobile PC Card. Refer to your application's documentation for specific instructions.
  2. Configuring Baud Rates:
    • The Hi-Speed COM Tools allow you to map legacy baud rates to higher speeds (e.g., 230.4, 460.8, or 921.6 Kbps).
    • Launch the Hi-Speed COM Tools utility (usually found in your Start Menu or system tray).
    • Use the user-friendly visual display to set custom baud rates or re-map existing ones.
    • Ensure the baud rate setting in your application matches the setting configured for the COM port.
  3. Changing COM Port Assignments: If you need to change the assigned COM port number, use the Hi-Speed COM Tools or your operating system's Device Manager. This can be useful to avoid conflicts with other serial devices.
  4. Vroča zamenjava: The card supports hot-swapping. You can insert or remove the card while the computer is running, though it is generally recommended to close any applications actively using the serial port before removal.

7. Vzdrževanje in nega

To ensure the longevity and reliable operation of your Socket Mobile SL0707-078 PC Card, follow these guidelines:

8. Odpravljanje težav

If you encounter issues with your Socket Mobile SL0707-078 PC Card, refer to the following common problems and solutions:

TežavaMožen vzrokrešitev
Card not detected by computer.
  • Kartica ni popolnoma vstavljena.
  • PC Card slot issue.
  • Drivers not installed.
  • Ensure the card is firmly seated in the PC Card slot.
  • Test with another PC Card slot or computer if possible.
  • Install the correct drivers from the Socket Mobile webmesto.
Serijska naprava ne komunicira.
  • Incorrect COM port selected.
  • Baud rate mismatch.
  • Faulty serial cable or device.
  • Težava z gonilnikom.
  • Verify the COM port number in Device Manager and your application.
  • Ensure baud rates in the Hi-Speed COM Tools and your application match.
  • Test with a different serial cable or device.
  • Reinstall drivers.
Slow communication speeds.
  • Baud rate not optimized.
  • Konfiguracija programske opreme.
  • Use the Hi-Speed COM Tools to map to higher baud rates (e.g., 921.6 Kbps).
  • Check your application's settings for optimal performance.

9. Tehnične specifikacije

Številka modelaSL0707-078
VmesnikPC Card (PCMCIA)
Serijska vrata1 x RS-232
PriključekDB-9 moški
Največja hitrost prenosa921.6 Kbps
UART Compatibility16550, 16650, 16750, 16950
Velikost FIFO128-bajtni
Poraba energije2.4mA (typical at 3.3V)
Delovna zvezatageSistemi 3.3V in 5V
Dimenzije izdelka4 x 1 x 3 inches (approximate, card only)
Teža predmeta2.08 unč

10. Informacije o garanciji

The Socket Mobile SL0707-078 Ruggedized Serial I/O PC Card comes with a Omejena doživljenjska garancija. This warranty covers defects in materials and workmanship under normal use. For detailed terms and conditions, including how to make a warranty claim, please refer to the official Socket Mobile webali se obrnite na njihovo podporo strankam.

11. Podpora strankam

For technical assistance, driver downloads, or further information regarding your Socket Mobile SL0707-078 PC Card, please visit the official Socket Mobile webspletno mesto. Tam običajno najdete vire za podporo, pogosta vprašanja in kontaktne podatke za podporo strankam.

Note: For Sharp Zaurus support, refer to www.socketcom.com/ZaurusSharp.asp.

Povezani dokumenti - SL0707-078

Prejview Socket Mobile バーコードリーダー トラブルシューティングガイド
Socket Mobileバーコードリーダーで発生する「データが反映されない」「アプリと接続できない」といった問題の解決方法、操作検査、およびサポートへの問い合わせ方法を説明します。
Prejview Socket Mobile バーコードリーダー 接続・データ反映トラブルシューティングガイド
Socket Mobile製バーコードリーダーの接続問題、データが反映されない問題、アプリ連携のトラブルシューティング方法を解説したガイド。
Prejview Socket Mobile バーコードリーダー 接続・データ反映トラブルシューティングガイド
Socket Mobile製バーコードリーダーの接続問題やアプリへのデータ反映されない問題の解決策をまとめたガイド。初期化、設定、動作確認方法を解説。
Prejview Socket Mobile バーコードスキャナー トラブルシューティングガイド:接続とデータ同期の問題
ソケットモバイル製バーコードスキャナーの接続問題、データ同期エラー、およびアプリ連携に関する一般的なトラブルシューティング手順を提供します。デバイスの再起動、初期化、OS/アプリの更新方法などを解説。
Prejview Uporabniški priročnik za SocketScan serije 700: Nastavitev in delovanje bralnika črtnih kod Bluetooth
Začnite uporabljati svoj Bluetooth čitalnik črtnih kod Socket Mobile S700, S730, S740, S760. Ta uporabniški priročnik zajema nastavitev, povezavo, skeniranje in specifikacije.
Prejview Socket Mobile DuraSled DS840 Barcode Scanner: Get Started Guide
This guide provides essential information for setting up and configuring your Socket Mobile DuraSled DS840 barcode scanner. Learn about charging, pairing with your host device using the Companion App, understanding Bluetooth connection modes (HID, MFi-SPP, SPP), and accessing support and warranty services.