1. Uvod
This manual provides instructions for the Mini BFT Mitto Series 433.92Mhz Garage Door Remote Control. This wireless handheld rolling code transmitter offers stable and reliable control for various automation systems, including garage doors, gates, and other access control systems. Its compact design and wall-mounted installation options provide convenient control for residential, commercial, and industrial applications.
Figure 1: BFT 433MHz remote controls (2-button and 4-button models). Key features highlighted: Security 2.0, Remote Dominance, Control One Garage Door, Lightweight.
2. Osnovne funkcije
- 433MHz Strong Signal: Ensures stable penetration through walls and obstacles for reliable operation.
- 12V DC Powered: Low power consumption design for long-lasting and dependable performance.
- Stenska zasnova: Offers flexible installation options for convenience.
- Združljivost z več napravami: Compatible with a variety of receiving systems.
- Trdna konstrukcija: Built with durable materials for extended lifespan.
- Enostavno združevanje: Simple and quick process to pair with compatible devices.
3. Združljivost
The BFT Mitto Series remote control is compatible with the following BFT brand garage door and roller blind door remote control models:
- Mitto 2 / Mitto 4
- Mitto B RCB 02 / Mitto B RCB 04
- Kleio B RCA 02 / Kleio B RCA 04
- TRC1 / TRC2 / TRC4
- Mitto2M / Mitto4M
Figure 2: Compatibility diagram showing the BFT remote control with various compatible BFT remote models.
4. Nastavitev in programiranje
Follow these instructions carefully to program your new remote control with your receiver system. There are two common programming types:
Figure 3: Programming instructions for Type 1 (physical buttons) and Type 2 (digital display) receivers.
Type 1 Programming (Physical Buttons)
- Odprite casing vašega sprejemnika. Nahaja se poleg vašega motorja.
- Na tiskanem vezju sprejemnika pritisnite gumb za programiranje (SW1). LED lučka sprejemnika utripa. Spustite gumb.
- Hkrati pritisnite oba gumba na novem daljinskem upravljalniku. Spustite ju. LED lučka sprejemnika neprekinjeno sveti.
- Pritisnite levi gumb na novem daljinskem upravljalniku. Spustite ga. LED lučka sprejemnika utripa.
- Počakajte 5 sekund. LED lučka sprejemnika ugasne.
- Ta postopek ponovite za desni gumb vašega novega daljinskega upravljalnika. Tokrat uporabite gumb za programiranje SW2.
- Počakajte 10 sekund.
- Vaš novi daljinski upravljalnik je programiran.
Type 2 Programming (Digital Display)
- Press the "OK" button on your receiver twice. The screen displays "PARA."
- Press the "-" button on your receiver twice. The screen displays "RADIO."
- Press the "OK" button on your receiver once. The screen displays "ADJ STRT."
- Press the "OK" button on your receiver once. The screen displays "Hidden Button."
- Press both buttons on your new remote control at the same time. Keep them pressed down. The screen displays "Released".
- Let the buttons go. The screen displays "Desired Button".
- Press a button on your new remote control. The screen displays "OK".
- Počakajte 10 sekund.
- Vaš novi daljinski upravljalnik je programiran.
Video 1: Demonstration of the remote control programming process with a receiver board.
5. Navodila za uporabo
Once programmed, your BFT Mitto remote control is ready for use. Simply press the corresponding button on the remote to activate the linked function (e.g., open/close garage door, gate, etc.). Ensure you are within the transmission range for optimal performance.
6. Vzdrževanje
- Zamenjava baterije: The remote control uses a 12V battery. If the remote's indicator light becomes dim or its range decreases, it's time to replace the battery. Open the remote's casinPrevidno dostopajte do baterije in jo zamenjajte, pri čemer pazite na pravilno polarnost.
- Čiščenje: Daljinski upravljalnik obrišite z mehko, suho krpo. Izogibajte se uporabi agresivnih kemikalij ali abrazivnih čistil.
- Shranjevanje: Daljinski upravljalnik shranjujte na suhem mestu, stran od ekstremnih temperatur in neposredne sončne svetlobe.
7. Odpravljanje težav
- Daljinec se ne odziva:
- Preverite baterijo. Po potrebi jo zamenjajte.
- Ensure you are within the effective transmission range.
- Verify that the remote is correctly programmed to the receiver. If unsure, repeat the programming steps.
- Zmanjšan obseg:
- Zamenjajte baterijo.
- Check for any new obstructions between the remote and the receiver.
- Ensure there is no interference from other 433MHz devices.
8. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Delovna frekvenca | 433MHz |
| Delovni letniktage | DC 12V |
| Razdalja prenosa | Up to 100m (open environment) |
| Način namestitve | Stenska zasnova |
| Vrsta baterije | 12V battery (commonly used) |
| Metoda kodiranja | Tekoči kodeks |
| Dimenzije (D x Š x V) | 64 mm (2.52 palcev) x 40 mm (1.57 palcev) x 16 mm (0.63 palcev) |
Figure 4: Dimensions of the BFT remote control.
9. Scenariji uporabe
The BFT Mitto Series remote control is versatile and can be used in various applications:
- Sistemi pametnega doma
- Access Control Barrier Gates
- Sistemi za nadzor razsvetljave
- Industrial Equipment Control
- Varnostni sistemi
- Nadzor garažnih vrat
- Kmetijski stroji
- Main Gates, Fences, Sliding Doors, Railings
Figure 5: Common applications for the remote control.
Figure 6: Additional application examples for the remote control.
10. Vsebina paketa
Paket vključuje:
- 1 x brezžični daljinski upravljalnik
Slika 7: Nprample of the 4-key remote control with keychain.
11. Uporabniški nasveti
Od uporabnika ni bilo na voljo nobenih posebnih nasvetov za uporabnike.viewali vprašanja in odgovori za ta izdelek.
12. Garancija in podpora
For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.