1. Uvod
The DATOUBOSS 6200W Pure Sine Wave Hybrid Solar Inverter is a multi-function inverter/charger, combining the functions of an inverter, solar charger, and battery charger to offer uninterruptible power support with a portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation for settings such as battery charging current, AC/solar charger priority, and acceptable input voltage na podlagi različnih aplikacij.
1.1 Ključne lastnosti
- Pure sine wave output for stable power supply to sensitive electronics.
- Nastavljiva vhodna glasnosttage-razred za gospodinjske aparate in osebne računalnike prek nastavitve LCD.
- Nastavljiv polnilni tok baterije glede na uporabo prek nastavitev LCD-zaslona.
- Nastavljiva prioriteta polnilnika AC/sončne energije prek LCD-zaslona.
- Združljivo z omrežno voltage ali moč generatorja.
- Samodejni ponovni zagon med okrevanjem AC.
- Zaščita pred preobremenitvijo, previsoko temperaturo in kratkim stikom.
- Pametna zasnova polnilnika za optimizirano delovanje baterije.
- Funkcija hladnega zagona.
- Built-in Intelligent MPPT System for maximizing solar energy conversion efficiency.
- Compatible with 48V Lead-Acid and Lithium Batteries, and can run batteryless.
- Supports parallel connection for enhanced power output and scalability.
- BMS communication for remote monitoring and control.
1.2 Osnovna sistemska arhitektura
The inverter is designed to integrate with photovoltaic modules, generators, and batteries to form a complete operating system. It can power various electrical devices in your home or office, including motor-type appliances such as tube lights, fans, refrigerators, and air conditioners.
2. Varnostna navodila
OPOZORILO: To poglavje vsebuje pomembna varnostna navodila in navodila za uporabo. Preberite in shranite ta priročnik za prihodnjo uporabo.
- Pred uporabo enote preberite vsa navodila in opozorilne oznake na enoti, baterijah in vse ustrezne razdelke tega priročnika.
- POZOR: Da bi zmanjšali tveganje poškodb, polnite samo svinčeno-kislinske akumulatorje z globokim ciklom polnjenja. Druge vrste akumulatorjev lahko počijo in povzročijo telesne poškodbe in materialno škodo.
- Ne razstavljajte enote. Če je potreben servis ali popravilo, ga odnesite v usposobljen servisni center. Nepravilno ponovno sestavljanje lahko povzroči nevarnost električnega udara ali požara.
- Da zmanjšate nevarnost električnega udara, odklopite vse žice, preden poskušate vzdrževati ali čistiti. Izklop enote ne bo zmanjšal tega tveganja.
- POZOR: To napravo z baterijo lahko namesti samo usposobljeno osebje.
- NIKOLI napolnite zamrznjeno baterijo.
- For optimum operation, follow required specifications to select appropriate cable size.
- Bodite zelo previdni pri delu s kovinskimi orodji na ali okoli baterij. Obstaja potencialna nevarnost, da bi orodje padlo na tla in povzročilo iskro ali kratek stik baterij ali drugih električnih delov, kar bi lahko povzročilo eksplozijo.
- Strictly follow installation procedures when connecting or disconnecting AC or DC terminals.
- A 150A fuse is provided as over-current protection for the battery supply.
- NAVODILA ZA OZEMLJITEV: This inverter/charger should be connected to a permanent grounded wiring system. Comply with local requirements and regulations.
- NIKOLI povzroči kratke stike na izhodu AC in vhodu DC. NE priključujte na električno omrežje, če pride do kratkega stika na vhodu DC.
- OPOZORILO: Only qualified service persons are able to service this device. If errors still persist after following troubleshooting, send this inverter/charger back to a local dealer or service center for maintenance.
3. Izdelek je končanview
3.1 Product Dimensions and Key Specifications
3.2 Detailed Parameters (Model DT-4862L)
3.3 LCD Display and Back Panel Overview
The front panel features an LCD display, status indicators (AC/INV, CHG, FAULT), and function keys (ESC, UP, DOWN, ENTER) for operation and monitoring. The back panel provides various connection ports including AC Input, AC Output, RS232, BMS/RS485, Dry Contact, Parallel connection, Battery Input, Power ON/OFF Switch, PV Input, Input Breaker, Fan, Battery Terminals, Solar Panel Input, AC Main/Second Output, and Output ground wire.
4. Namestitev
4.1 Razpakiranje in pregled
Before installation, carefully inspect the unit. Ensure that nothing inside the package is damaged. The package should contain the inverter unit (x1) and the user manual (x1).
4.2 Preparation and Mounting
Before connecting, remove the bottom cover by removing two screws. When selecting a mounting location, consider the following:
- Razsmernika ne montirajte na vnetljive gradbene materiale.
- Namestite na trdno površino.
- Za lažje branje LCD-zaslona namestite ta pretvornik v višini oči.
- Allow clearances of approximately 20 cm to the sides and 50 cm above and below the unit for proper air circulation and heat dissipation.
- Za optimalno delovanje mora biti temperatura okolice med 10 °C in 50 °C.
- Enoto namestite navpično.
- Ensure sufficient space for removing wires.
WARNING: Suitable for mounting on concrete or other non-combustible surfaces only.
Install the unit by screwing three screws: use M6*80mm expansion bolts for points 1 and 2, and M4 or M5 for point 3.
4.3 Priključitev baterije
POZOR:
- For safety and regulation compliance, install a separate DC over-current protector or disconnect device between the battery and inverter.
- Vse ožičenje mora opraviti usposobljeno osebje.
- Use appropriate cable for battery connection to reduce risk of injury.
Refer to the table below for recommended battery cable and terminal sizes. Assemble battery ring terminals, insert battery wires flatly into inverter connectors, and ensure bolts are tightened to 2 Nm. Verify correct polarity at both the battery and inverter/charger.
| Model | Tipično Ampstarost | Kapaciteta baterije | Velikost žice | Ring Terminal Dimensions (D/L mm) | Vrednost navora |
|---|---|---|---|---|---|
| 2KVA | 88A | 100AH | 1*6AWG / 2*10AWG | 6.4/33.2 / 6.4/23.8 | 2~3 Nm |
| 3KVA | 132A | 200AH | 1*4AWG / 2*8AWG | 6.4/33.2 / 6.4/29.2 | 2~3 Nm |
| 3.6KVA | 165A | 200AH | 2 * 4AWG | 8.4/33.2 | 5Nm |
| 5KVA | 109A | 200AH | 1*2AWG / 2*6AWG | 6.4/39.2 / 6.4/33.2 | 2~3 Nm |
| 5.5KVA | 121A | 200AH | 1*2AWG / 2*6AWG | 6.4/39.2 / 6.4/33.2 | 2~3 Nm |
| 6.2KVA | 124A | 200AH | 1*2AWG / 2*4KWG | 8.4/39.2 / 8.4/33.2 | 5Nm |
| 8KVA | 183.2A | 250AH | 1*2/0AWG | 8.4/51 | 5Nm |
| 11KVA | 228A | 250AH | 1*3/0AWG | 8.4/54 | 5Nm |
OPOZORILO: Prepričajte se, da je dolžina vseh baterijskih kablov enaka. V nasprotnem primeru bo voltage difference between inverters and batteries, causing parallel inverters not to work.
4.4 Vhodno/izhodna povezava AC
POZOR:
- Install a separate AC breaker between the inverter and the AC input power source. This ensures the inverter can be disconnected during maintenance and is protected from over-current. Recommended breaker specs: 32A for 3KW, 50A for 5KW.
- Do not mis-connect input and output connectors. There are two terminal blocks with "IN" and "OUT" markings.
- Vse ožičenje mora opraviti usposobljeno osebje.
Refer to the table below for suggested AC wire requirements. Before making connections, open the DC protector or disconnector. Remove 10mm of insulation from conductors and shorten phase L and neutral conductor N by 3mm.
| Model | merilnik | Vrednost navora |
|---|---|---|
| 2KVA | 14AWG | 0.8~1.0Nm |
| 3KVA | 12AWG | 1.2~1.6Nm |
| 3.6KVA | 12AWG | 1.2~1.6Nm |
| 5KVA | 10AWG | 1.4~1.6Nm |
| 5.5KVA | 10AWG | 1.4~1.6Nm |
| 6.2KVA | 10AWG | 1.4~1.6Nm |
| 8KVA | 8AWG | 1.4~1.6Nm |
| 11KVA | 8AWG | 1.4~1.6Nm |
WARNING: Be sure all output N wires of each inverter must be connected all the time. Otherwise, it will cause inverter fault in error code #72.
4.5 PV priključek
POZOR:
- Preden priključite PV module, namestite ločeno DC varovalko med razsmernik in PV module.
- Vse ožičenje mora opraviti usposobljeno osebje.
- Use appropriate cable for PV module connection.
Refer to the table below for suggested PV wire requirements. When choosing PV modules, ensure the open circuit voltage (Voc) does not exceed the maximum PV array open circuit voltage pretvornika. Največja dobava voltage should be close to the optimal PV access voltage range for best performance. If one PV module cannot meet this requirement, connect multiple PV modules in series.
| Tipično Ampstarost | merilnik | Vrednost navora |
|---|---|---|
| 30A | 12AWG | 1.4~1.6Nm |
4.6 Končna skupščina
After connecting all wirings, put the bottom cover back by screwing the two screws. Then, put the wire cover back to the unit.
4.7 Komunikacijska povezava
The inverter supports communication with a PC, Wi-Fi cloud, and GPRS cloud. For detailed instructions on setting up monitoring software or apps, refer to the specific guidelines provided with the communication modules (e.g., "Wi-Fi Plug Quick Installation Guideline" or "GPRS RTU Quick Installation Guideline").
5. Delovanje
5.1 Vklop/izklop
Once the unit is properly installed and batteries are connected, simply press the On/Off switch (located on the button of the case) to turn on the unit.
5.1.1 Koraki za zagon
- Priključite baterijo (voltage needs to be beyond 23V) or AC (AC needs to confirm the suitable input range depending on the output mode).
- Vklopljeno omrežno napajanje: Connect to normal AC power, press the switch. The system will automatically turn on. If AC output power priority is set, the panel will display AC mode after a period, indicating successful startup.
- Zagon baterije: Connect to battery, press the power-on button. The system will automatically turn on. After a period, the panel will display battery mode, indicating successful startup.
5.1.2 Koraki za zaustavitev
When the system is in battery mode or AC mode output, press the switch again to turn off the unit.
5.2 Upravljalna in prikazovalna plošča
The operation and display panel on the front of the inverter includes an LCD display, three LED indicators (AC/INV, CHG, FAULT), and four function keys (ESC, UP, DOWN, ENTER). These indicate the operating status and input/output power information.
| LED indikator | Stanje | Sporočilo |
|---|---|---|
| AC/INV | Zeleno sveti | Izhod napaja pripomoček v linijskem načinu. |
| Zelena utripa | Izhod se napaja iz baterije ali PV v baterijskem načinu. | |
| CHG | Zeleno sveti | Baterija je popolnoma napolnjena. |
| Zelena utripa | Baterija se polni. | |
| NAPAKA | Rdeče sveti | Napaka se pojavi v pretvorniku. |
| Rdeče utripa | V pretvorniku se pojavi opozorilno stanje. |
| Funkcijska tipka | Opis |
|---|---|
| ESC | Za izhod iz nastavitvenega načina. |
| UP | Za premik na prejšnjo izbiro. |
| DOL | Za prehod na naslednjo izbiro. |
| ENTER | Za potrditev izbire v nastavitvenem načinu ali vstop v nastavitveni način. |
5.3 Nastavitev in prikaz LCD-zaslona
Press and hold the ENTER button for 3 seconds to enter setting mode. Use UP/DOWN buttons to select programs and ENTER to confirm. The LCD display cycles through various information such as input voltage, frekvenca, PV vol.tage, polnilni tok, voltage, izhodna voltage, izhodna frekvenca, odsttage, load in Watt/VA, DC discharging current, and firmware versions.
5.4 Izenačevanje baterije
The inverter includes a battery equalization function to reverse the buildup of negative chemical effects like stratification and to remove sulfate crystals. It is recommended to equalize batteries periodically.
5.4.1 Kdaj izenačiti
The controller will enter the Equalize stage when the setting equalization interval is reached or when equalization is actively initiated. The battery will remain in this stage until the set equalized time is reached.
5.4.2 Izenačite čas polnjenja in časovno omejitev
During equalization, the controller charges the battery until it reaches the equalization voltage. Če voltage ne doseže izenačevalne prostorninetage within the set equalized time, the controller will extend the charging time until the voltage is achieved. If it still doesn't reach the voltage after the timeout, equalization will stop and return to float stage.
6. Vzdrževanje
Regular maintenance ensures the longevity and optimal performance of your DATOUBOSS Hybrid Solar Inverter. Always disconnect all power sources (AC, DC, and battery) before performing any maintenance.
- Čiščenje: Prezračevalne odprtine pretvornika naj bodo čiste od prahu in umazanije, da zagotovite pravilen pretok zraka in preprečite pregrevanje. Za čiščenje zunanjosti uporabite mehko, suho krpo.
- Preverjanje povezav: Periodically inspect all electrical connections (battery, AC input/output, PV input, communication ports) for tightness and corrosion. Tighten any loose connections and clean any corrosion.
- Pregled baterije: Check battery terminals for corrosion and ensure battery cables are in good condition. Monitor battery voltage and performance regularly.
- Posodobitve vdelane programske opreme: Preverite pri proizvajalcu website or contact support for any available firmware updates to ensure optimal performance and access to new features.
- Okoljski pregled: Ensure the inverter is operating within the recommended temperature and humidity ranges.
WARNING: Only qualified personnel should perform maintenance that involves opening the unit or working with internal components.
7. Odpravljanje težav
This section provides guidance for common issues, fault codes, and warning messages. For persistent problems, contact qualified service personnel.
7.1 Kode napak in rešitve
When the inverter enters fault mode, the red LED light is always on, and the LCD displays a fault code. Refer to the table below for explanations and solutions.
| Koda napake | Fault Event / Possible Cause | Kaj storiti |
|---|---|---|
| 01 | Ventilator je zaklenjen, ko je pretvornik izklopljen. | Contact repair center for fan replacement. |
| 02 | Previsoka temperatura ali NTC ni dobro povezan. | Check for proper ventilation and ambient temperature. |
| 03 | Baterija voltage je previsok. | Check battery charging settings. |
| 04 | Baterija voltage je prenizek. | Re-charge or replace battery. |
| 05 | Output short circuited or over temperature detected by internal converter components. | Preverite ožičenje, odstranite prekomerno obremenitev. |
| 06 | Izhodna voltage je previsok. | Contact repair center. |
| 07 | Časovna omejitev preobremenitve. | Zmanjšajte priključno obremenitev. |
| 08 | Avtobus voltage je previsok. | Contact repair center. |
| 09 | Mehki zagon avtobusa ni uspel. | Contact repair center. |
| 51 | Preobremenitev ali prenapetost. | Ponovno zaženite enoto. Če napaka ne izgine, jo vrnite v servisni center. |
| 52 | Avtobus voltage je prenizek. | Ponovno zaženite enoto. Če napaka ne izgine, jo vrnite v servisni center. |
| 53 | Mehki zagon inverterja ni uspel. | Ponovno zaženite enoto. Če napaka ne izgine, jo vrnite v servisni center. |
| 55 | Preko DC voltage v izmeničnem izhodu. | Contact repair center. |
| 57 | Tokovni senzor je odpovedal. | Contact repair center. |
| 58 | Izhodna voltage je prenizek. | Ponovno zaženite enoto. Če napaka ne izgine, jo vrnite v servisni center. |
| 59 | PV voltage presega omejitev. | Zmanjšajte število fotonapetostnih modulov v seriji. |
7.2 Opisi opozoril
When a warning occurs, the red LED flashes, and the LCD displays an alarm code. The inverter does not enter failure mode during a warning. Refer to the table below for warning events and audible alarms.
| Koda opozorila | Opozorilni dogodek | Zvočni alarm |
|---|---|---|
| 01 | Ventilator je zaklenjen, ko je pretvornik vklopljen. | Piskajte trikrat vsako sekundo. |
| 02 | Nad temperaturo. | Noben. |
| 03 | Baterija je prenapolnjena. | Pisk enkrat na sekundo. |
| 04 | Nizka baterija. | Pisk enkrat na sekundo. |
| 07 | Preobremenitev. | Piskajte enkrat na 0.5 sekunde. |
| 10 | Zmanjšanje izhodne moči. | Dvakrat piskajte vsake 3 sekunde. |
| 15 | PV energija je nizka. | Dvakrat piskajte vsake 3 sekunde. |
| 16 | High AC input (>280VAC) during BUS soft start. | Noben. |
| EQ | Battery equalization. | Noben. |
| 6P | Baterija ni priključena. | Noben. |
7.3 Code Reference for Information
Related information codes are displayed on the LCD screen. These codes provide status updates rather than indicating a fault or warning.
| Koda | Opis |
|---|---|
| 60 | If battery status is not allowed to charge and discharge after communication between inverter and battery is successful, it will show code 60 to stop charging and discharging battery. |
| 61 | Communication lost. After 10 minutes, inverter will stop charging and discharging to lithium battery. |
| 69 | If battery status is not allowed to charge after communication, it will show code 69 to stop charging battery. |
| 70 | If battery status must charge after communication, it will show code 70 to charge battery. |
| 71 | If battery status is not allowed to discharge after communication, it will show code 71 to stop discharge battery. |
8. Specifikacije
This section provides detailed technical specifications for the DATOUBOSS 6200W Pure Sine Wave Hybrid Solar Inverter.
8.1 Splošne specifikacije
| Atribut | Vrednost |
|---|---|
| Blagovna znamka | DATOUBOS |
| Model izdelka | DT-4862/DT-4862L |
| Izvor | celinska Kitajska |
| Certificiranje | CE, FCC, RoHS, pse, weee |
| Nazivna moč | 6200 W |
| Največja moč | 12400 W |
| Nazivna zmogljivost | 6200 W |
| Učinkovitost pretvorbe | 0.9 |
| Valovna oblika | Čisti sinusni val |
| Transfer Time (adjustable) | Računalniki (način UPS) 10 ms, naprave (način APL) 20 ms |
| Komunikacijska vrata | Lithium Battery BMS Communication Card WifiCard, Dry Contact |
| RS232 | Hitrost prenosa 2400 |
| Delovna temperatura | -10~50°C |
| Vlažnost | 20%~95% (brez kondenzacije) |
| Hrup | <50 db |
8.2 Input/Output Specifications
| Atribut | Vrednost |
|---|---|
| Vhodni viri | L+N+PE |
| Nazivna vhodna voltage | 220/230 / 240VAC |
| voltage Območje | 90–280 V AC ± 3 V (način APL), 170–280 V AC ± 3 V (način UPS) |
| Vhodna voltage (PV) | 20V-109V |
| Izhodna voltage | AC 220V±10% / 220/230/240VAC±5% |
| Izhodna frekvenca | 50Hz/60Hz (Auto Adaptive) / 50Hz/60Hz±0.1% |
8.3 PV Charging Mode Specifications
| Atribut | Vrednost |
|---|---|
| MAX.PV vhodna moč | 6200 W |
| Obseg sledenja MPPT | 120~500Vdc |
| Best Voltage | 300~400Vdc |
| MAX.PV vhodna glasnosttage | 500 Vdc |
| MAX.PV polnilni tok | 100A |
| MAX.AC polnilni tok | 80A |
| MAKS. polnilni tok | 120A |
9. Uporabniški nasveti
- Vzporedna povezava: The inverter supports parallel connection with other inverters of the same model. Ensure you use the appropriate parallel board and communication cables as described in Appendix I of the full user manual. This allows for increased power output and system scalability.
- Združljivost baterije: This inverter is compatible with both 48V Lead-Acid and Lithium batteries. It also features a batteryless mode, allowing it to power loads directly from the PV array or AC grid without a connected battery.
- Aktivacija litijeve baterije: For dormant Li-ion batteries, the inverter has a dual activation function where either mains or photovoltaic power supply access can trigger activation.
- Optimizacija porabe energije: Utilize the four charging modes and three discharge modes to maximize energy use and reduce electricity bills. Refer to the LCD settings for configuring these modes.
- PDF priročnik: For a complete and detailed guide, please refer to the official user manual PDF available at: DATOUBOSS 6200W Inverter User Manual (PDF).
10. Garancija in podpora
DATOUBOSS products are designed for reliability and performance. For warranty information, including terms, conditions, and duration, please refer to the documentation provided with your purchase or contact your seller directly. Keep your proof of purchase for warranty claims.
10.1 Tehnična podpora
If you encounter any issues or require technical assistance, please contact the DATOUBOSS FlagShip Store or your authorized dealer. Provide your product model (DT-4862/DT-4862L) and a detailed description of the problem to facilitate support.
Note: Only qualified service persons are authorized to perform repairs on this device.
