OurlUporabniški priročnik za dvopasovni WiFi repetitor ife 1200 Mbps

1. Uvod

Thank you for choosing the Ourlife 1200Mbps Dual-Band WiFi Repeater. This device is designed to enhance your wireless network experience by extending Wi-Fi coverage, boosting signal strength, and eliminating dead zones in your home or office. It offers versatile functionality, operating as a Wi-Fi Repeater, Wireless Access Point (AP), or Router, and supports both 2.4GHz and 5GHz frequency bands for high-speed and stable internet connectivity.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it thoroughly before use to ensure optimal performance and safety.

2. Varnostne informacije

• Ensure the device is used in a dry environment, away from water or excessive humidity.
• Naprave ne izpostavljajte ekstremnim temperaturam ali neposredni sončni svetlobi.
• Uporabljajte samo napajalnik, ki ga je priložil ali določil proizvajalec.
• Avoid placing the device near heat sources or in enclosed spaces that may hinder ventilation.
• Do not attempt to open, disassemble, or modify the device. This will void the warranty and may cause damage or injury.
• Napravo hranite izven dosega otrok.
• Disconnect the device from the power outlet during lightning storms or when unused for long periods.

3. Vsebina paketa

Paket običajno vključuje:

• Ourlife 1200Mbps Dual-Band WiFi Repeater
• Uporabniški priročnik (ta dokument)
• Ethernet kabel (lahko se razlikuje glede na paket)

Please check the contents upon unpacking. If any items are missing or damaged, contact your retailer.

4. Izdelek je končanview

Ourlife WiFi Repeater features a compact design with six adjustable high-gain external antennas to maximize signal coverage. It includes LED indicators for power, Wi-Fi status, and signal strength, along with a WPS button for quick setup and Ethernet ports for wired connections.

5. Nastavitev in namestitev

Ourlife WiFi Repeater offers a simple plug-and-play setup. You can configure it using the WPS button for quick connection or through a web browser for more detailed settings.

5.1 Hitra namestitev z uporabo WPS

1. Plug the WiFi Repeater into a power outlet near your existing router.
2. Počakajte, da LED-lučka za napajanje sveti neprekinjeno.
3. Pritisnite gumb WPS na glavnem usmerjevalniku.
4. Within 2 minutes, press the WPS button on the Ourlife WiFi Repeater.
5. The Repeater's Wi-Fi LED should start blinking and then turn solid, indicating a successful connection. This process typically takes about 8 seconds.
6. Once connected, you can unplug the repeater and move it to a desired location within your router's Wi-Fi range but closer to the dead zone.

Note: If your router does not support WPS, or if you prefer manual configuration, proceed to the Web Browser Setup section.

5.2 Web Browser Setup (for Repeater, AP, or Router Mode)

1. Plug the WiFi Repeater into a power outlet.
2. Connect your computer or mobile device to the repeater's default Wi-Fi network (e.g., "Ourlife_XXXX" or similar, check the label on the device). No password is required initially.
3. Odpri a web browser and enter the default IP address (usually 192.168.1.1 or 192.168.0.1, or a specific domain like "repeater.net" - check the device label or manual for the exact address).
4. Log in using the default username and password (usually "admin" for both, check the device label).
5. Follow the on-screen instructions to select your desired operating mode (Repeater, AP, or Router) and configure the network settings.
6. For Repeater Mode: Select your existing Wi-Fi network, enter its password, and choose a new name for the extended network (or keep the same name).
7. For AP Mode: Connect an Ethernet cable from your main router to the repeater's WAN/LAN port. The repeater will create a new wireless network.
8. For Router Mode: Connect the internet source (e.g., modem) to the repeater's WAN port. The repeater will act as your main router.
9. Save your settings and restart the device if prompted.

6. Načini delovanja

Ourlife WiFi Repeater supports three primary operating modes:

6.1 Način repetitorja

In Repeater Mode, the device extends the coverage of an existing wireless network. It receives the Wi-Fi signal from your main router and re-broadcasts it, effectively expanding the range and eliminating Wi-Fi dead zones. This mode is ideal for large homes or offices where the main router's signal doesn't reach all areas.

6.2 AP (Access Point) Mode

AP Mode converts a wired network connection into a wireless one. If you have an Ethernet port in a room with no Wi-Fi, you can connect the repeater to that port via an Ethernet cable. The repeater will then create a new wireless network, allowing wireless devices to connect to the internet. This mode is plug-and-play and does not require complex setup.

6.3 Način usmerjevalnika

In Router Mode, the device acts as a primary router, creating a new private wireless AC network. You would connect your internet source (e.g., a DSL/Cable modem) directly to the repeater's WAN port. This mode is suitable for setting up a new network or replacing an existing router.

7. Vzdrževanje

• Čiščenje: Za čiščenje naprave uporabite mehko, suho krpo. Ne uporabljajte tekočih ali aerosolnih čistil.
• Posodobitve vdelane programske opreme: Občasno preverite proizvajalčeve website for firmware updates. Keeping your device's firmware up-to-date can improve performance, stability, and security.
• Ponovni zagon: If you experience network issues, try restarting the repeater by unplugging it from the power outlet for 10 seconds and then plugging it back in.
• Ponastavitev: If the device is not functioning correctly, you may need to perform a factory reset. Locate the reset button (usually a small pinhole) and press and hold it for about 5-10 seconds until the LEDs flash. Note that a factory reset will erase all custom settings, and you will need to reconfigure the device.

8. Odpravljanje težav

Q: The repeater is not powering on.

A: Ensure the power adapter is securely plugged into both the repeater and a working power outlet. Try a different outlet to rule out power supply issues.

Q: I cannot connect to the repeater's Wi-Fi network.

A: Make sure the repeater is powered on and its Wi-Fi LED is active. If you're connecting for the first time, look for the default network name (SSID) printed on the device. If you've changed the network name and password, ensure you're using the correct credentials. Try resetting the device to factory defaults and reconfiguring.

V: Razširjeni signal Wi-Fi je šibek ali nestabilen.

A: The repeater might be placed too far from your main router. Try moving the repeater to a location halfway between your router and the area with poor coverage. Ensure there are no major obstructions (thick walls, large metal objects) between the repeater and your devices or the main router. Adjust the external antennas for better reception.

Q: I forgot the login password for the web stran za upravljanje.

A: You will need to perform a factory reset on the device. This will revert the login credentials to the default "admin/admin" (or as printed on the device label) and erase all custom settings. You will then need to reconfigure the repeater.

Q: My internet speed is slow when connected to the repeater.

A: Ensure the repeater is placed in an optimal location to receive a strong signal from your main router. Check if there are many devices connected to the extended network. If using Repeater Mode, the speed can be halved as the device is both receiving and transmitting on the same channel. Consider using AP Mode if you have a wired connection available.

9. Specifikacije

Note on Variants: A 300Mbps 2.4G only variant of this repeater is also available. The specifications above primarily refer to the 1200Mbps Dual-Band model.

10. Uporabniški nasveti

• Optimalna postavitev: For best results in Repeater Mode, place the device roughly halfway between your main router and the area where you need improved Wi-Fi coverage. Ensure it receives at least a moderate signal from the main router.
• Nastavitev antene: Experiment with the 180° adjustable antennas to find the best orientation for signal strength and coverage in your environment.
• Dvopasovni naprednitage: Utilize the 5GHz band for high-bandwidth activities like streaming 4K video or online gaming, and the 2.4GHz band for general browsing and devices further away, as 2.4GHz has better penetration through walls.
• WPS Convenience: If your main router supports WPS, use the WPS button for a quick and hassle-free setup.
• Žične povezave: Use the Ethernet ports to connect wired devices (like smart TVs, gaming consoles, or desktop PCs) to the extended network for a more stable and faster connection.

11. Garancija in podpora

Ourlife products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase or visit the official Ourlče webspletnega mesta. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.