1. Uvod
The TP-LINK Festa FS308G is an 8-Port Gigabit Smart/Unmanaged Desktop Switch designed to expand your network capacity with high-speed connectivity. Featuring 8 Gigabit Ethernet ports, this switch provides a simple, cost-effective, high-performance, non-disruptive, and standard-compliant upgrade to an old network to a 1000Mbps network. It supports Power over Ethernet (PoE) on all 8 ports, simplifying the deployment of PoE-powered devices such as IP cameras, wireless access points, and VoIP phones.
Slika 1: Spredaj view of the TP-LINK Festa FS308GP Switch
2. Vsebina paketa
Before you begin installation, ensure that your package contains the following items:
- TP-LINK Festa FS308G 8-Port Gigabit Smart Switch
- Napajalni adapter
- Napajalni kabel
- Gumijaste noge
- Mounting Kit (for wall-mount or rack-mount, if applicable)
- Navodila za hitro namestitev
Figure 2: Switch and Accessories
3. Fizični opis
3.1 Sprednja plošča
The front panel features 8 Gigabit Ethernet ports and various LED indicators for status monitoring.
Slika 3: Postavitev sprednje plošče
LED indikatorji:
- LED za napajanje: Označuje stanje napajanja stikala.
- PoE MAX LED: Indicates if the total PoE power budget is nearing or exceeding its limit.
- PoE Status LEDs (per port): Indicates if a port is delivering PoE power.
- Speed/Link/Act LEDs (per port): Indicates link status, activity, and connection speed (e.g., green for Gigabit, amber for 10/100Mbps).
- Gumb za ponastavitev: Uporablja se za obnovitev tovarniških nastavitev.
3.2 Zadnja plošča
The rear panel includes the power input connector and a grounding screw.
Slika 4: Postavitev zadnje plošče
4. Nastavitev in namestitev
4.1 Varnostni ukrepi
- Prepričajte se, da je napajalnik voltage ustreza zahtevam stikala.
- Ne blokirajte prezračevalnih odprtin.
- Avoid placing the switch in direct sunlight, near heat sources, or in excessively humid environments.
- Uporabljajte samo priloženi napajalnik.
4.2 Fizična namestitev
The switch can be placed on a desktop, mounted on a wall, or installed in a rack, depending on your needs and the included accessories.
Postavitev na namizje:
Place the switch on a flat, stable surface. Attach the included rubber feet to the bottom of the switch to prevent slipping and provide stability.
Montaža na steno:
If wall mounting, use the provided mounting kit. Ensure the wall can support the weight of the switch and connected cables. Mark two points on the wall, drill holes, insert anchors, and secure the mounting screws, leaving a small gap for the switch's mounting slots.
4.3 Priključitev stikala
- Povežite omrežne naprave: Connect your network devices (computers, servers, IP cameras, Wi-Fi APs, VoIP phones, etc.) to any of the 8 Gigabit Ethernet ports using standard Ethernet cables. For PoE-powered devices, ensure they are PoE-compatible.
- Povežite se z napajanjem: Connect the provided power adapter to the switch's power input port on the rear panel, then plug the power adapter into a suitable electrical outlet.
- Preverite moč: Once powered on, the Power LED on the front panel should illuminate.
Figure 5: Basic Network Connection
Figure 6: PoE Connection with IP Cameras
Figure 7: PoE Connection with Wi-Fi Access Points
5. Upravljanje stikala
The TP-LINK Festa FS308G is an unmanaged switch, meaning it operates plug-and-play without requiring complex configuration. Once connected, it automatically detects network speeds and provides power to connected PoE devices.
5.1 LED Status Interpretation
- LED za napajanje:
- Na: Stikalo je vklopljeno.
- Izklop: Stikalo je izklopljeno.
- PoE MAX LED:
- Na: The total PoE power consumption is at or near the maximum budget.
- utripa: The total PoE power consumption has exceeded the maximum budget, and some PoE ports may be shut down.
- Izklop: PoE power consumption is within normal limits.
- PoE Status LEDs (per port):
- Na: The port is supplying PoE power to a connected device.
- Izklop: The port is not supplying PoE power.
- Speed/Link/Act LEDs (per port):
- Zelena (trdna): A Gigabit (1000Mbps) link is established.
- Zelena (utripa): Podatki se prenašajo ali prejemajo z gigabitno hitrostjo.
- Jantarna (trdna): A 10/100Mbps link is established.
- Amber (Flashing): Data is being transmitted or received at 10/100Mbps speed.
- Izklop: No device is connected to the port, or the connected device is powered off.
6. Vzdrževanje
6.1 Čiščenje
- Pred čiščenjem vedno odklopite napajanje.
- Za brisanje zunanjosti stikala uporabite mehko, suho krpo.
- Ne uporabljajte tekočih ali aerosolnih čistil.
6.2 Okoljski vidiki
- Ensure adequate ventilation around the switch to prevent overheating.
- Operate the switch within the specified temperature and humidity ranges (refer to Specifications section).
6.3 Ponastavitev stikala
If the switch is not functioning correctly, you can perform a factory reset. With the switch powered on, use a paperclip or similar pointed object to press and hold the Reset button on the front panel for approximately 5-10 seconds until the LEDs flash. The switch will then reboot with factory default settings.
7. Odpravljanje težav
7.1 Brez napajanja
- Ensure the power cord is securely connected to the switch and the power outlet.
- Preverite, ali vtičnica deluje.
- Preverite, ali napajalnik deluje pravilno.
7.2 Ni povezave/aktivnosti na vratih
- Preverite povezavo ethernetnega kabla na obeh koncih. Poskusite z drugim kablom.
- Prepričajte se, da je priključena naprava vklopljena in deluje pravilno.
- Verify that the network adapter of the connected device is enabled.
- Poskusite priključiti napravo na druga vrata na stikalu.
7.3 Počasna hitrost omrežja
- Ensure all connected devices and cables support Gigabit Ethernet for optimal performance.
- Preverite, ali je v omrežju preobremenjen promet ali ali so v uporabi aplikacije, ki intenzivno uporabljajo pasovno širino.
- Verify that the Speed/Link/Act LED for the port indicates a Gigabit connection (Green).
7.4 Naprava PoE ne prejema napajanja
- Ensure the connected device is a PoE-compatible device (PD).
- Check the PoE Status LED for the port; it should be On.
- Verify that the total PoE power consumption is not exceeding the switch's budget (check PoE MAX LED). If it's flashing, disconnect some PoE devices or use a higher-power PoE switch.
- Poskusite z drugim ethernetnim kablom.
8. Specifikacije
Slika 8: Tehnične specifikacije
Figure 9: PoE Budget and Power Consumption
Slika 10: Dimenzije izdelka
Figure 11: Environmental Specifications
Splošno
- Pristanišča: 8 x 10/100/1000Mbps RJ45 Ports (Auto-Negotiation/Auto MDI/MDIX)
- Vrata PoE: 8 Ports (PoE+)
- Standard PoE: Skladno z IEEE 802.3af/at
- Proračun napajanja PoE: Refer to Figure 9 for detailed budget.
- Preklopna zmogljivost: 16 Gbps
- Hitrost posredovanja paketov: 11.9 Mpps
- Tabela naslovov MAC: 4K vnosov
- Jumbo okvir: 9 KB
- Napajanje: External Power Adapter (Output: 53.5VDC / 1.31A)
- Dimenzije (Š x G x V): Refer to Figure 10 for detailed dimensions.
Okoljski
- Delovna temperatura: 0 °C do 40 °C (32 °F do 104 °F)
- Temperatura shranjevanja: -40 °C do 70 °C (-40 °F do 158 °F)
- Delovna vlažnost: 10% do 90% brez kondenzacije
- Vlažnost pri shranjevanju: 5% do 90% brez kondenzacije
Certifikati
- CE, FCC, RoHS
Figure 12: Certifications
9. Uporabniški nasveti
- For optimal performance, use high-quality Cat5e or Cat6 Ethernet cables for all connections.
- When connecting PoE devices, ensure the total power consumption does not exceed the switch's PoE budget to avoid unexpected shutdowns or instability.
- Place the switch in a location with good airflow to prevent overheating, especially if many PoE devices are connected.
- If experiencing network issues, a simple power cycle of the switch and connected devices can often resolve temporary glitches.
10. Garancija in podpora
TP-LINK provides a limited warranty for this product. Please refer to the official TP-LINK webZa podrobne garancijske pogoje, specifične za vašo regijo, obiščite spletno mesto ali garancijski list, ki je priložen paketu.
Tehnična podpora
For technical support, firmware updates, and additional resources, please visit the official TP-LINK support webspletno mesto. Tam običajno najdete pogosta vprašanja, vodnike za odpravljanje težav in kontaktne podatke za podporo strankam.
Figure 13: TP-LINK SMB Warranty Information
Figure 14: TP-LINK After-Sales Information
