GIRIER Tuya WiFi Smart Switch Module Instruction Manual

1. Uvod

The GIRIER Tuya WiFi Smart Switch Module is designed to transform your traditional light switches into smart, app-controlled devices without the need for a neutral wire. This compact module supports 1, 2, 3, or 4 gang configurations and offers 2-way control, voice control via Alexa and Google Home, and flexible timing settings. Its upgraded WiFi + Bluetooth dual module design ensures a faster, safer, and more stable connected life.

2. Vsebina paketa

• 1x Smart Switch Module (selected gang configuration)
• 1x Resistor
• 1x uporabniški priročnik

3. Specifikacije

4. Varnostne informacije

• Always ensure power is disconnected at the main circuit breaker before installation, maintenance, or removal of the device.
• Namestitev mora opraviti usposobljen električar ali pa mora biti v skladu z lokalnimi električnimi predpisi.
• Do not exceed the maximum load ratings specified for each channel.
• Napravo hranite stran od vode, vlage in visokih temperatur.
• Ta naprava je zasnovana samo za uporabo v zaprtih prostorih.

5. Namestitev in nastavitev

5.1 Wiring Diagrams (No Neutral Wire Required)

The module is designed for installations without a neutral wire. A resistor is included and required for stable operation, especially with low-wattage bulbs. Please ensure the bulb connected to L1 is over 10W for optimal performance.

5.2 Namestitev in seznanjanje aplikacij

1. Prenesite TuyaSmart or Pametno življenje aplikacijo iz trgovine z aplikacijami na vašem pametnem telefonu (iOS ali Android).
2. Registrirajte se ali se prijavite v svoj račun.
3. Prepričajte se, da je vaše omrežje Wi-Fi 2.4 GHz.
4. Power on the switch module. The indicator light should blink rapidly, indicating it's in pairing mode. If not, refer to the module's specific reset instructions (usually pressing the physical switch connected to S1 multiple times or holding it).
5. In the app, tap '+' to add a device. The app should automatically discover the module via Bluetooth. If not, manually select 'Lighting' > 'Switch (Wi-Fi)'.
6. Follow the on-screen instructions to connect the module to your Wi-Fi network.
7. Ko je naprava povezana, jo lahko preimenujete in dodelite sobi.

6. Delovanje

6.1 Daljinsko upravljanje prek aplikacije

Control your lights from anywhere using the TuyaSmart/Smart Life app. Turn lights on/off, set schedules, and manage other smart features.

6.2 Glasovni nadzor

Integrate with Amazon Alexa or Google Home Assistant for hands-free control. Link your TuyaSmart/Smart Life account in the Alexa or Google Home app.

• Alexa: "Alexa, prižgi luči v dnevni sobi."
• Googlova domača stran: "Hey Google, turn off the bedroom light."

6.3 2-Way Control

The module supports physical 2-way control when connected to a mechanical rocker switch. This allows you to control the light both via the app and manually from multiple switch locations.

6.4 Flexible Timing Settings

Utilize the app to set various timers to automate your lighting:

• Inching Time: Turn on for a set duration (e.g., 1 minute), then automatically turn off.
• Odštevanje: Turn off after a specified countdown (e.g., 10 minutes).
• Circulate Timing: Set lights to turn on and off at specific times daily (e.g., turn on at 18:30, turn off at 22:00 every day).

6.5 Relay Status Setting

Configure the module's behavior after a power restart:

• Na: Light turns on after power is restored.
• Izklop: Light remains off after power is restored.
• Remember Last Status: Light returns to its state before the power outage.

Nasvet: If the internet connection restarts, the device may also need to be restarted manually to re-establish connection.

7. Vzdrževanje

• Keep the device clean and dry. Avoid exposure to dust, dirt, and moisture.
• Do not attempt to open or repair the module yourself. Refer to qualified personnel for service.
• Regularly check for firmware updates in the TuyaSmart/Smart Life app to ensure optimal performance and security.

8. Odpravljanje težav

• Light flickering or switch unresponsive after wiring: Ensure the included resistor is installed close to the bulb of L1. Also, verify that the bulb connected to L1 is over 10W.
• Naprava se ne seznani: Check that your Wi-Fi network is 2.4GHz. Ensure the module is in pairing mode (indicator light blinking rapidly). Try resetting the module by cycling power or using the physical switch.
• No voice control: Confirm that your TuyaSmart/Smart Life account is correctly linked to your Alexa or Google Home account. Check your internet connection.
• Težave z nadzorom aplikacij: Verify your phone has an active internet connection and the module is connected to Wi-Fi. Restart the app or the module if necessary.

9. Uporabniški nasveti

• No Neutral Wire Installation: This module is specifically designed for installations where a neutral wire is not available in the switch box. The included resistor is crucial for stable operation in such setups.
• Združljivost žarnice: For best results and to prevent flickering, use bulbs with a wattage greater than 10W, especially for the L1 connection where the resistor is placed.
• Physical 2-Way Control: The module is compatible with mechanical rocker switches for 2-way control. If you need specific wiring diagrams for this setup, contact customer support.
• Dual Module Design: The WiFi + Bluetooth dual module design aids in faster device discovery and more stable connectivity during setup and operation.

10. Garancija in podpora

The GIRIER Tuya WiFi Smart Switch Module comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact GIRIER customer service through the official store or the contact information provided in your purchase documentation.