Hilitand AC 110V Swimming Pool Pump Timer User Manual

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Hilitand AC 110V Swimming Pool Pump Timer. This programmable timer is designed to automate the ON/OFF cycles of your swimming pool pump, heater filter, and other outdoor water systems, enhancing efficiency and convenience. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Varnostne informacije

WARNING: Risk of Electric Shock. Installation should be performed by a qualified electrician or service personnel in accordance with all local and national electrical codes.

• Always disconnect power at the circuit breaker before installing or servicing the timer.
• Ensure the timer is installed in a location protected from direct water spray and excessive moisture, despite its durable design.
• Preverite, ali voltage and current ratings of your pump or appliance do not exceed the timer's specifications.
• Ne poskušajte sami odpreti ali popraviti časovnika. Vsa servisna dela prepustite usposobljenemu osebju.
• Otroke hranite stran od električnih naprav.

Vsebina paketa

Carefully unpack your timer and verify that all items are present and undamaged. If any items are missing or damaged, please contact customer support.

• 1 x Hilitand Pool Pump Timer (with upper and lower cover)
• 2 x priključki
• 2 x podložke
• 4 x Vijaki
• 1 x uporabniški priročnik

Image: Contents of the Hilitand Pool Pump Timer package, including the timer unit, two connectors, two washers, four screws, and the user manual.

Konec izdelkaview

The Hilitand AC 110V Pool Pump Timer features a robust design and user-friendly interface for reliable operation.

• Programabilno upravljanje: Supports up to 28 ON/OFF cycles per day, allowing for precise scheduling over a 7-day cycle.
• Uporabniku prijazen vmesnik: Equipped with an easy-to-read LCD display for simplified programming and monitoring.
• Vzdržljiva konstrukcija: Made from robust PC material, designed to withstand outdoor conditions from -10°C to 40°C (14°F to 104°F).
• Varnostno napajanje: Includes a built-in 200mAh lithium-ion battery, providing up to 60 days of operation during power outages to retain settings.
• Vsestranska uporaba: Suitable for swimming pool pumps, heater filters, and various other outdoor water systems requiring timed control.

Slika: spredaj view of the Hilitand Pool Pump Timer, enclosed in its clear protective casing, showing the digital display and control buttons.

Specifikacije

Image: The Hilitand Pool Pump Timer with its dimensions clearly marked: 90mm (3.5in) width, 158mm (6.2in) height, and 64mm (2.5in) depth.

Nastavitev in namestitev

Follow these steps for safe and correct installation of your timer.

1. Mounting the Timer

1. Choose a suitable outdoor location that is easily accessible, protected from direct sunlight, and within reach of the power source and the appliance to be controlled.
2. Use the provided screws to securely mount the timer's housing to a flat, stable surface. Ensure the housing is level.

2. Navodila za ožičenje

IMPORTANT: Ensure power is OFF at the circuit breaker before proceeding with any wiring.

• Open the timer's protective cover.
• Identify the input terminals (power supply) and output terminals (to appliance). Refer to the wiring diagram usually printed inside the timer or on the unit itself.
• Connect the AC 110V power supply wires to the input terminals. Use appropriate wire gauges for your application.
• Connect the wires leading to your pool pump or heater filter to the output terminals.
• Ensure all connections are tight and secure. Use the provided connectors and washers to seal cable entries, maintaining the timer's weather resistance.
• Zaščitni pokrov tesno zaprite.

Image: The Hilitand Pool Pump Timer with its clear outer casing removed, revealing the internal timer unit and the wiring terminals at the bottom for electrical connections.

Navodila za uporabo

Familiarize yourself with the control panel buttons:

• C/R: Clear/Reset button.
• D+: Day adjustment.
• H+: Hour adjustment.
• M+: Minute adjustment.
• P: Program button (to enter/exit programming mode).
• Clock icon: Set current time/day.
• Ročno: Manual ON/OFF/AUTO override.

Slika: Bližnji posnetek view of the Hilitand Pool Pump Timer's control panel, showing the LCD display and the various buttons for setting time and programming.

1. Nastavitev trenutnega časa in dneva

1. Pritisnite Ikona ure gumb.
2. Medtem ko držite Ikona ure, pritisnite D+ da nastavite trenutni dan v tednu.
3. Medtem ko držite Ikona ure, pritisnite H+ da nastavite trenutno uro.
4. Medtem ko držite Ikona ure, pritisnite M+ da nastavite trenutno minuto.
5. Spustite Ikona ure gumb. Čas je zdaj nastavljen.

2. Programiranje ciklov VKLOP/IZKLOP

Časovnik podpira do 28 programov VKLOP/IZKLOP. Vsak program je sestavljen iz časa VKLOP in časa IZKLOP.

1. Pritisnite P enkrat pritisnite gumb. Na zaslonu se bo prikazalo "1 ON".
2. Pritisnite D+ to select the day(s) for this program (e.g., Mon-Fri, Sat-Sun, every day, specific days).
3. Pritisnite H+ za nastavitev želene ure vklopa.
4. Pritisnite M+ za nastavitev želene minute vklopa.
5. Pritisnite P ponovno. Na zaslonu se bo prikazalo "1 IZKLOP".
6. Pritisnite D+ to select the day(s) for this OFF program (usually matches the ON program).
7. Pritisnite H+ to set the desired OFF hour.
8. Pritisnite M+ to set the desired OFF minute.
9. Za dodatne programe VKLOP/IZKLOP (do 28) ponovite korake 1–8.
10. Ko nastavite vse želene programe, pritisnite Ikona ure gumb za izhod iz načina programiranja in vrnitev na prikaz trenutnega časa.

3. Manual Control / Override

The Priročnik button allows you to override the programmed settings temporarily.

• Pritisnite Priročnik button repeatedly to cycle through modes:
• VKLOPLJENO: The appliance will remain ON continuously, overriding all programs.
• IZKLOPLJENO: The appliance will remain OFF continuously, overriding all programs.
• SAMODEJNO: The timer will operate according to the programmed ON/OFF cycles. This is the standard operating mode.

4. Resetting the Timer

To clear all settings and reset the timer to its factory defaults, press the C/R button using a pointed object (e.g., a pen tip). You will then need to re-set the current time and all programs.

Vzdrževanje

• Čiščenje: Wipe the timer's exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the protective cover is always clean and clear for display visibility.
• Varnostno kopiranje baterije: The built-in lithium-ion battery maintains time and program settings during power outages. No user maintenance is required for the battery. If the display is blank or settings are lost frequently after power interruptions, the battery may need professional servicing.
• Pregled: Periodically inspect the wiring connections and the timer housing for any signs of damage or wear.

Odpravljanje težav

Garancija in podpora

Hilitand products are manufactured to high-quality standards. For warranty information or technical support, please refer to the specific warranty card included with your product or contact Hilitand customer service through the retailer where the product was purchased. Please have your model number (AC 110V) and purchase date available when contacting support.